Page 2 - In the box you will find
69-2718ES—01 ii In the box you will find • Thermostat • Wallplate (attached to thermostat) • Screws and anchors • Quick Start Guide • Thermostat ID Card • Wire labels • User Guide • Quick Reference Card 69-2718ES_A.indd 2 8/13/2012 2:59:46 PM
Page 3 - Welcome
Welcome Congratulations on your purchase of a Honeywell Wi-Fi programmable thermostat. When registered to Honeywell’s Total Connect Comfort Solutions, you can remotely monitor and control the heating and cooling system in your home or business—you can stay connected to your comfort system wherever y...
Page 4 - Do not place your old thermostat in the trash if it contains
69-2718ES—01 2 This thermostat works with common 24 volt systems such as forced air, hydronic, heat pump, oil, gas, and electric. It will not work with millivolt systems, such as a gas fireplace, or with 120/240 volt systems such as baseboard electric heat. MERCURY NOTICE: Do not place your old ther...
Page 5 - Table of contents
69-2718ES—01 3 About your new thermostat Controls and Home screen quick reference ............................................ 5Preset energy-saving schedules ................. 6 Installation Installing your thermostat ............................ 8Connecting to your Wi-Fi network ............. 26Re...
Page 6 - Features of your Wi-Fi thermostat; Your new thermostat provides:
69-2718ES—01 4 Features of your Wi-Fi thermostat With your new thermostat, you can: • Connect to the Internet to monitor and control your heating/cooling system • View and change your heating/cooling system settings • View and set temperature and schedules • Receive alerts via email and get automati...
Page 7 - Controls and home screen quick reference
5 69-2718ES—01 Controls and home screen quick reference Once your Wi-Fi thermostat is installed, it will display the home screen. Portions of this display will change depending on how you are viewing it. The screen lights when you press any button. It stays lit for 8 seconds after you complete chang...
Page 8 - Preset energy-saving schedules; Default Heat Settings
69-2718ES—01 6 Preset energy-saving schedules This thermostat is pre-set with energy-saving program settings for four time periods. Using the default settings can reduce your heating/cooling expenses by as much as 33% if used as directed. Savings may vary depending on geographic region and usage. To...
Page 9 - Setting up your thermostat; you may want to watch a brief installation video. Use
7 69-2718ES—01 Setting up your thermostat Setting up your Wi-Fi programmable thermostat is easy. It is preprogrammed and ready to go as soon as it is installed and registered. Install your thermostat.Connect your home Wi-Fi network.Register online for remote access. Before you begin, you may want to...
Page 10 - Installing your thermostat
69-2718ES—01 8 Installing your thermostat You might need the following tools to install this thermostat: • No. 2 Phillips screwdriver • Small pocket screwdriver • Pencil • Level (optional) • Drill and bits (3/16” for drywall, 7/32” for plaster) (optional) • Hammer (optional) • Electrical tape (optio...
Page 11 - Remove old thermostat faceplate; C wire is required and
9 69-2718ES—01 Installing your thermostat C C MCR33823 If you have an older thermostat with a sealed mercury tube, turn to page 2 for proper disposal instructions. Terminal designation Installing your thermostat 2 Remove old thermostat faceplate and leave wires connected.2a Take a picture of the wir...
Page 12 - Do not label by wire color.; If no tag matches a wire
69-2718ES—01 10 Installing your thermostat 3 Label wires. Do not label by wire color. Use the supplied sticky tags to label each wire as you disconnect it. Label wires according to the old thermostat terminal designations, not by wire color. Note: If no tag matches a wire terminal label, write the t...
Page 13 - Sticky tags; Separate Wi-Fi thermostat and its
11 69-2718ES—01 Blank sticky tags Sticky tags Terminal designation Installing your thermostat 5 Separate Wi-Fi thermostat and its wallplate. On your new thermostat, grasp the finger holds on the top and bottom of the wallplate with one hand and the thermostat (front) with the other hand. Pull pieces...
Page 14 - You may be able to use your existing
69-2718ES—01 12 Installing your thermostat 6 Mount wallplate for Wi-Fi thermostat. Mount your new wallplate using screws and anchors included with the thermostat. If necessary: Drill 3/16-in holes for drywall. Drill 7/32-in holes for plaster. Note: You may be able to use your existing wall anchors. ...
Page 15 - Wiring; For; conventional; system, see page 15. See “Glossary” on page 64 for further
13 69-2718ES—01 Important! The Wi-Fi thermostat requires a C wire to operate. The C, or common, wire brings 24 VAC power to the thermostat. Many older mechanical or battery operated thermostats do not require a C wire. If you don’t have a C wire, try: • Looking for an unused wire that is pushed into...
Page 16 - only
69-2718ES—01 14 Installing your thermostat Wiring (conventional system) 7A Wire the Wi-Fi thermostat to your conventional system. a Starting with the C Wire, match the sticky tag on the wire to the terminal labels. You must have a C wire. See page 13. b Loosen screw, insert wire on inside edge of te...
Page 17 - AUX
15 69-2718ES—01 Installing your thermostat Wiring (heat pump system only) 7B Wire Wi-Fi thermostat to your heat pump. a Starting with the C Wire, match the sticky tag on the wire to the terminal labels. You must have a C wire. See page 13. b Loosen screw, insert wire on inside edge of terminal, then...
Page 18 - Use this if your wire labels don’t match the terminal labels.
69-2718ES—01 16 Installing your thermostat Alternate wiring (conventional system) Use this if your wire labels don’t match the terminal labels. Note: You must have a C wire or equivalent. See page 13. See key to 1 – 3 on page 17. Y2 R 4 M V RH Y1 H W1 F R Y W G RC W2 W2 G W Y R RC Y2 C MCR33885 CONV...
Page 19 - Alternate wiring key (conventional system)
17 69-2718ES—01 Installing your thermostat Do not use K terminal. For future use. If your old thermostat had both R and RH wires, remove metal jumper. Connect the R wire to the RC terminal, and the RH wire to the R terminal. Remove metal jumper connecting R and RC only if you must connect both R and...
Page 21 - Alternate wiring key (heat pump system only)
19 69-2718ES—01 Installing your thermostat Alternate wiring key (heat pump system only) Do not use K terminal. For future use. If old thermostat has separate wires on AUX and E , place both wires into the E/AUX terminal. If old thermostat has wire on AUX with a jumper to E , place wire on E/AUX term...
Page 22 - Insert quick reference card.
69-2718ES—01 20 Installing your thermostat 8 Insert quick reference card. Fold quick reference card along score lines, and slide it into the slot on the back of the thermostat. Back of thermostat Quick reference card MCR33916 MCR33858 69-2718ES_A.indd 20 8/13/2012 3:00:28 PM
Page 25 - 1 Set clock to current day and time.; Set Day; or; Done
23 69-2718ES—01 Installing your thermostat 11 Set clock to current day and time. 11a Press s or t to set clock. 11b Press Set Day . 11c Press s or t to select the day of week. 11d Press Done to save. (Press and hold a st button to quickly change a setting.) MCR33908 HOLD MCR33909 HOLD 69-2718ES_A.in...
Page 26 - 2 Determine your heating/cooling system type.; If your system type
69-2718ES—01 24 Installing your thermostat 12 Determine your heating/cooling system type. Important! Heating/cooling system type must be set so that your thermostat operates properly and does not damage your system. 12a If your system type is conventional single stage (natural gas-powered single sta...
Page 27 - 3a Press the
25 69-2718ES—01 Installing your thermostat Heating/cooling system not turning on? Refer to page 62 or FAQ at wifithermostat.com/support Congratulations! Your thermostat is operational.13 Test your thermostat 13a Press the System button to change to heating or cooling and begin operation. 13b For rem...
Page 28 - Connecting to your Wi-Fi network; Smartphone
69-2718ES—01 26 Connecting to your Wi-Fi network To complete this process, you must have a wireless device connected to your home wireless network. Any of these device types will work: • Tablet (recommended) • Laptop (recommended) • Smartphone If you get stuck... at any point in this procedure, rest...
Page 29 - Home Network
27 69-2718ES—01 1 Connect to your thermostat. 1a Make sure the thermostat displays Wi-Fi Setup . 1b On the wireless device (laptop, tablet, smartphone), view the list of available Wi-Fi networks. 1c Connect to the network called NewThermostat_123456 (the number will vary). Note: If you are asked to ...
Page 30 - Connect
69-2718ES—01 28 Connecting to your Wi-Fi network 2 Join your home network. 2a Open your web browser to access the Thermostat Wi-Fi Setup page. The browser should automatically direct you to the correct page; if it does not, go to http://192.168.1.1 2b Find the name of your home network on this page ...
Page 32 - Wait
69-2718ES—01 30 Connecting to your Wi-Fi network 3 Make sure your thermostat is connected. While the connection is in process, your thermostat will flash Wait for up to 3 minutes. When the connection is complete, the display will show Wi-Fi Setup Connection Success . The Wi-Fi signal strength will a...
Page 33 - Registering your thermostat online
31 69-2718ES—01 Registering your thermostat online M31570 To view and set your Wi-Fi thermostat remotely, you must have a Total Connect Comfort account. Use the following steps.1 Open the Total Connect Comfort web site. Go to mytotalconnectcomfort.com View the Wi-Fi Thermostat Registration video at ...
Page 34 - Login or create an account.; Check your email; for an activation; Follow activation instructions; in the
69-2718ES—01 32 Registering your thermostat online 2 Login or create an account. If you have an account, click Login – or –click Create An Account . 2a Follow the instructions on the screen.2b Check your email for an activation message from My Total Connect Comfort. This may take several minutes. No...
Page 35 - a Follow the instructions on; MAC ID
33 69-2718ES—01 Registering your thermostat online 3 Register your Wi-Fi thermostat. After you are logged in to your Total Connect Comfort account, register your thermostat. 3a Follow the instructions on the screen. After adding your thermostat location, you must enter the thermostat’s unique identi...
Page 36 - b When the thermostat is
69-2718ES—01 34 Registering your thermostat online 3b When the thermostat is successfully registered, the Total Connect Comfort registration screen will display a SUCCESS message. In the thermostat display, you will see Setup Complete for about 90 seconds. 69-2718ES_A.indd 34 8/13/2012 3:01:02 PM
Page 37 - iTunes
35 69-2718ES—01 Registering your thermostat online 3c Also notice that your thermostat displays its signal strength. Congratulations! You’re done. You can now control your thermostat from anywhere through your tablet, laptop, or smartphone Total Connect Comfort free app is available for Apple ® iPho...
Page 38 - Setting the time and day
69-2718ES—01 36 1 Press Set Clock/Day/Schedule , then press s or t to set clock. 2 Press Set Day , then press s or t to select the day of week. 3 Press Done to save. Note: If the Set Clock/Day/Schedule option is not displayed, press Done . Note: If the display flashes Set Clock , the thermostat will...
Page 39 - Press; Fan; to select; Auto; On; Setting the fan
37 69-2718ES—01 Press Fan to select On or Auto (toggle to re-select). Auto : Fan runs only when the heating or cooling system is on. Auto is the most commonly used setting. On : Fan is always on. Note: Options may vary depending on your heating/cooling equipment. Setting the fan MCR33895 69-2718ES_A...
Page 40 - Selecting system mode; Depending on how; System; Heat; Cool; Off; Em Heat
69-2718ES—01 38 Selecting system mode Note: Depending on how your thermostat was installed, you may not see all system settings. Press System to select: Heat : Controls only the heating system. Cool : Controls only the cooling system. Off : Heating/cooling systems are off. Auto : Selects heating or ...
Page 41 - Adjusting program schedules; Set Schedule
39 69-2718ES—01 Adjusting program schedules 1 Press Set Clock/Day/Schedule , then Set Schedule . 2 Press s or t to set your Monday (Mon) Wake time, then press Next . 3 Press s or t to set the temperature for this period, then press Next . 4 Set time and temperature for the next time period (Leave). ...
Page 42 - Overriding schedules temporarily; Cancel; . The program schedule will
69-2718ES—01 40 Overriding schedules temporarily Press s or t to immediately adjust the temperature.The new temperature will be maintained only until the next programmed time period begins.To cancel the temporary setting at any time, press Cancel . The program schedule will resume. MCR33896 HOLD 69-...
Page 43 - Overriding schedules permanently
41 69-2718ES—01 Overriding schedules permanently 1 Press HOLD to permanently adjust the temperature. This will turn off the program schedule. 2 Press s or t to adjust the temperature setting. The temperature you set will be maintained 24 hours a day until you manually change it or press Cancel to re...
Page 44 - Unregistering thermostat; Register at Total Connect; until it is
69-2718ES—01 42 Unregistering thermostat If you remove the thermostat from your Total Connect Comfort website account (for example, you’re moving and leaving the thermostat behind), the thermostat will display Register at Total Connect until it is re-registered. M33876 69-2718ES_A.indd 42 8/13/2012 ...
Page 45 - Replacing your router; Re-connect to a Wi-Fi network by following the steps on page 26.
43 69-2718ES—01 Disconnecting Wi-Fi Replacing your router If you disconnect the thermostat from your Wi-Fi network:1 Enter system setup (see page 48).2 Change setting 39 to 0 (see page 54).The screen will display Wi-Fi Setup . Re-connect to a Wi-Fi network by following the steps on page 26. Turning ...
Page 46 - Software updates; Updating; and shows the percentage of the update
69-2718ES—01 44 Software updates Honeywell periodically issues updates to the software for this thermostat. The updates occur automatically through your Wi-Fi connection. All your settings are saved, so you will not need to make any changes after the update occurs.While the update is taking place, y...
Page 47 - Smart Response Technology; before; Recovery; is
45 69-2718ES—01 Smart Response Technology This feature allows the thermostat to “learn” how long the heating/cooling system takes to reach programmed temperature settings, so the temperature is reached at the time you set.For example: Set the Wake time to 6:00 am, and the temperature to 70°. The hea...
Page 48 - Compressor protection; The message; Cool On; for a heat
69-2718ES—01 46 Compressor protection This feature forces the compressor to wait a few minutes before restarting, to prevent equipment damage. The message Cool On (or Heat On for a heat pump) will flash during the wait time. M33882 69-2718ES_A.indd 46 8/13/2012 3:01:33 PM
Page 49 - Auto changeover; System setting function 12 controls
47 69-2718ES—01 Auto changeover This feature is used in climates where both air conditioning and heating are used on the same day.When the system is set to Auto , the thermostat automatically selects heating or cooling depending on the indoor temperature.Heat and cool settings must be at least 3 deg...
Page 50 - Setting functions and options
69-2718ES—01 48 Setting functions and options You can change options for a number of system functions. Available functions depend on the type of system you have. The functions, along with available options, are described on pages 50–54.This thermostat is pre-set for a single-stage heating/cooling sy...
Page 52 - System setup; Function
69-2718ES—01 50 System setup (See page 48 for instructions.) Function Settings & Options 1 Select System Type If you are not sure of your heating/ cooling system type or have other questions, go to wifithermostat.com 0 Heat/cool: Gas, oil or electric heating with central air conditioning. 1 Heat...
Page 57 - Frequently asked questions
55 69-2718ES—01 Frequently asked questions : Q Will my thermostat still work if I lose my Wi-Fi connection? : A Yes, the thermostat will operate your heating and/or cooling system with or without Wi-Fi. : Q How do I find the password to my router? : A Contact the manufacturer of the router or check ...
Page 60 - Troubleshooting; Lost Signal
69-2718ES—01 58 Troubleshooting Lost Signal If the no-Wi-Fi indicator displays in place of the Wi-Fi strength indicator in the upper right hand corner of the home screen: • Check another device to be sure Wi-Fi is working in your home; if not, call your Internet Service Provider. • Move the router. ...
Page 61 - Error Code; Error Codes
59 69-2718ES—01 Troubleshooting Error Code Action E01 During Wi-Fi Setup, the router lost power. • Ensure your router has power. • If trying to connect to a hidden or manually added network, confirm the router has power and is working. E02 Invalid Wi-Fi password. This code displays for 30 seconds, t...
Page 66 - Glossary
69-2718ES—01 64 Glossary C wire The “C” or common wire brings 24 VAC power to the thermostat from the heating/cooling system. Some older mechanical or battery operated thermostats may not have this wire connection. It is necessary for establishing a Wi-Fi connection to your home network. Heat Pump h...
Page 67 - Regulatory information
65 69-2718ES—01 Regulatory information FCC Compliance Statement (Part 15.19) (USA only) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:1 This device may not cause harmful interference, and2 This device must accept any interference received, i...
Page 69 - -year limited warranty
67 69-2718ES—01 1-year limited warranty Honeywell warrants this product, excluding battery, to be free from defects in the workmanship or materials, under normal use and service, for a period of one (1) year from the date of purchase by the consumer. If at any time during the warranty period the pro...
Page 70 - Automation and Control Systems
Automation and Control Systems Honeywell International Inc. 1985 Douglas Drive North Golden Valley, MN 55422 wifithermostat.com ® U.S. Registered Trademark.Apple, iPhone, iPad, iPod touch and iTunes are trademarks of Apple Inc. All other trademarks are the property of their respective owners.© 2012 ...
Page 71 - Guía del usuario
Guía del usuario Termostato programable con conexión WiFi Serie Red inalámbrica (Wi-Fi) RTH6500WF 69-2718ES_A.indd 1 8/13/2012 3:01:58 PM
Page 73 - Bienvenido
Bienvenido Felicitaciones por la compra del termostato programable con conexión WiFi de Honeywell. Cuando se registre en Total Connect Comfort Solutions de Honeywell, puede supervisar y controlar de manera remota el sistema de calefacción y refrigeración de su hogar o empresa; puede permanecer conec...
Page 74 - AVISO SOBRE MERCURIO:; No coloque el termostato existente en la basura si
69-2718ES—01 2 Este termostato funciona con sistemas comunes de 24 voltios, como aplicaciones de aire forzado, hidrónicas, de una bomba de calor, de aceite, de gas y eléctricas.No funciona con sistemas de milivoltios, como una chimenea a gas, ni con sistemas de 120/240 voltios, como la calefacción d...
Page 75 - Índice
69-2718ES—01 3 Acerca de su nuevo termostato Referencia rápida de los controles y la pantalla de inicio .................................. 5Cronogramas de ahorro de energía predeterminados ............................ 6 Instalación Instalación del termostato ........................... 8Conexión a l...
Page 76 - Características del termostato con conexión WiFi; Con el nuevo termostato, podrá realizar lo siguiente:; Ver y configurar la temperatura y los cronogramas; El nuevo termostato ofrece lo siguiente:; Tecnología Smart Response
69-2718ES—01 4 Características del termostato con conexión WiFi Con el nuevo termostato, podrá realizar lo siguiente: • Conectarse a Internet para supervisar y controlar el sistema de calefacción/refrigeración • Ver y cambiar las configuraciones del sistema de calefacción/refrigeración • Ver y confi...
Page 77 - Referencia rápida de los controles y la pantalla de inicio
5 69-2718ES—01 Referencia rápida de los controles y la pantalla de inicio Una vez que el termostato con conexión WiFi esté instalado, podrá visualizar la pantalla de inicio. Partes de esta pantalla cambiarán según cómo la vea. La pantalla se ilumina cuando presiona cualquier botón. Permanece ilumina...
Page 78 - Cronogramas de ahorro de energía predeterminados
69-2718ES—01 6 Cronogramas de ahorro de energía predeterminados Este termostato cuenta con configuraciones del programa de ahorro de energía predeterminadas durante cuatro períodos. Si utiliza las configuraciones predeterminadas, puede reducir los gastos de calefacción/refrigeración hasta en un 33%,...
Page 79 - Configuración del termostato; le recomendamos que mire un breve video de
7 69-2718ES—01 Configuración del termostato Configurar el termostato programable es fácil. Está preprogramado y listo para funcionar tan pronto como se instale y se registre. Instale su termostato.Conecte a su red doméstica WiFi.Regístrelo a través de Internet para obtener acceso remoto. Antes de co...
Page 80 - Instalación del termostato
69-2718ES—01 8 Instalación del termostato Es posible que necesite las siguientes herramientas para instalar el termostato: • Destornillador Phillips n.° 2 • Destornillador de bolsillo pequeño • Lápiz • Nivel (opcional) • Taladro y brocas (3/16” [4.8 mm] en paneles de yeso, 7/32” [5.5 mm] en yeso) (o...
Page 81 - Retire el termostato existente.
9 69-2718ES—01 Instalación del termostato C C MCR33823 Si el termostato existente tiene un tubo de mercurio sellado, vaya a la página 2 para obtener instrucciones sobre cómo desecharlo adecuadamente. Designación de los terminales 2 Retire el termostato existente. 2a Tome una fotografía de las conexi...
Page 82 - Etiquete los cables.; If si ninguna etiqueta coincide
69-2718ES—01 10 Instalación del termostato 3 Etiquete los cables. No etiquete por color del cable. Utilice las etiquetas adhesivas suministradas para identificar cada cable a medida que los desconecta. Etiquete los cables conforme a las designaciones de los terminales del termostato existente, no se...
Page 83 - Separe el termostato con conexión
11 69-2718ES—01 Instalación del termostato Etiqueta autoadhesiva en blanco Etiqueta autoadhesiva Designación de los terminales 5 Separe el termostato con conexión WiFi y la placa de pared. En el nuevo termostato, sostenga, con una mano, la placa de pared desde los orificios de sujeción en la parte s...
Page 84 - Monte la placa de pared para
69-2718ES—01 12 Instalación del termostato 6 Monte la placa de pared para termostato con conexión WiFi. Monte la nueva placa de pared con los tornillos y anclajes incluidos con el termostato. Si fuese necesario: Taladre agujeros de 3/16 in (4.8 mm) en paneles de yeso. Taladre agujeros de 7/32 in (5....
Page 85 - cuál es el terminal común de 24 V CA.; Cableado; Para obtener sistemas de calefacción/refrigeración; convencionales; , consulte la página 15. Para obtener más
13 69-2718ES—01 Instalación del termostato ¡Importante! el termostato con conexión WiFi requiere de un cable C para que funcione. El cable C, o común, le transmite 24 V CA al termostato. Muchos termostatos mecánicos o con batería más antiguos no requieren de un cable C. Si no tiene un cable C, inten...
Page 86 - Debe tener un cable C. Refiérase a la página 13.; solo
69-2718ES—01 14 Instalación del termostato Cableado (sistema convencional) 7A Coloque el cableado del termostato con conexión WiFi en su sistema convencional. a Comience con el cable C y coloque la etiqueta autoadhesiva en el cable con las etiquetas del terminal. Debe tener un cable C. Refiérase a l...
Page 87 - Cableado (sistema de bomba de calor únicamente)
15 69-2718ES—01 Instalación del termostato Cableado (sistema de bomba de calor únicamente) 7B Coloque los cables del termostato con conexión WiFi a su bomba de calor. a Comience con el cable C y coloque la etiqueta autoadhesiva en el cable con las etiquetas del terminal. Debe tener un cable C. Refié...
Page 88 - Cableado alternativo (sistema convencional); debe tener un
69-2718ES—01 16 Instalación del termostato Cableado alternativo (sistema convencional) Utilícelo si las etiquetas de los cables no coinciden con las etiquetas de los terminales. Nota: debe tener un cable C o equivalente. Refiérase a la página 13. Consulte las claves de 1 a 3 en la página 17. Y2 R 4 ...
Page 89 - Clave para cableado alternativo (sistema convencional)
17 69-2718ES—01 Instalación del termostato No utilice el terminal K . Para uso futuro. Si su termostato existente tenía cables R y RH , extraiga el puente de metal. Conecte el cable R al terminal RC , y el cable RH al terminal R . Retire el puente de metal que conecta los terminales R y RC solo si d...
Page 90 - Cableado alternativo (sistema de bomba de calor únicamente)
69-2718ES—01 18 Instalación del termostato Cableado alternativo (sistema de bomba de calor únicamente) Utilícelo si las etiquetas de los cables no coinciden con las etiquetas de los terminales. Nota: debe tener un cable C o equivalente. Refiérase a la página 13. Consulte las claves de 1 – 7 en la pá...
Page 92 - Inserte la tarjeta de
69-2718ES—01 20 Instalación del termostato 8 Inserte la tarjeta de referencia rápida. Doble la tarjeta de referencia rápida en tres partes por las líneas marcadas y deslícela en la ranura entre el termostato y la placa de pared. Parte posterior del termostato Tarjeta de referencia rápida MCR33858 MC...
Page 96 - 2 Determine el tipo de sistema de calefacción/refrigeración.; Si se trata de un sistema; • Calefacción y refrigeración
69-2718ES—01 24 Instalación del termostato 12 Determine el tipo de sistema de calefacción/refrigeración. ¡Importante! El tipo del sistema de calefacción/refrigeración debe estar configurado para que el termostato funcione correctamente y no dañe el sistema. 12a Si se trata de un sistema convencional...
Page 97 - 3a Presione el botón
25 69-2718ES—01 Instalación del termostato El sistema de calefacción/refrigeración, ¿no enciende? Consulte la página 62 o las Preguntas frecuentes en wifithermostat.com/support ¡Felicitaciones! Su termostato ya funciona.13 Pruebe el termostato 13a Presione el botón System (Sistema) para cambiar a ca...
Page 98 - Conexión a la red WiFi; Teléfono inteligente
69-2718ES—01 26 Conexión a la red WiFi Para completar este paso, debe tener un dispositivo inalámbrico conectado a su red inalámbrica doméstica. Cualquiera de estos tipos de dispositivos funcionará: • Computadora tipo tablet (recomendado) • Computadora portátil (recomendado) • Teléfono inteligente S...
Page 99 - Red doméstica
27 69-2718ES—01 Conexión a la red WiFi 1 Conecte el termostato. 1a Verifique que el termostato muestre Wi-Fi Setup (configuración de WiFi). 1b Consulte la lista de todas las redes WiFi disponibles en el dispositivo inalámbrico (computadora tipo tablet, computadora portátil o teléfono inteligente). 1...
Page 103 - Registro del termostato en línea
31 69-2718ES—01 Registro del termostato en línea M31570 Para ver y configurar el termostato con conexión WiFi de manera remota, debe tener una cuenta en Total Connect Comfort. Siga los siguientes pasos.1 Abra el sitio web Total Connect Comfort. Vaya a mytotalconnectcomfort.com Mire el video Wi-Fi Th...
Page 104 - Login; Revise su correo electrónico
69-2718ES—01 32 Registro del termostato en línea M31571 2 Inicie sesión o cree una cuenta. Si tiene una cuenta, haga clic en Login (Iniciar sesión) – O bien –haga clic en Create An Account (Crear una cuenta). 2a Siga las instrucciones en la pantalla.2b Revise su correo electrónico para verificar si ...
Page 105 - • MAC ID (Número de
33 69-2718ES—01 Registro del termostato en línea 3 Registre su termostato con conexión WiFi. Después de que haya iniciado sesión en su cuenta My Total Connect Comfort, registre el termostato. 3a Siga las instrucciones en la pantalla. Después de añadir la ubicación del termostato, debe ingresar los i...
Page 106 - b Cuando el termostato se haya
69-2718ES—01 34 Registro del termostato en línea 3b Cuando el termostato se haya registrado correctamente, la pantalla de registro de Total Connect Comfort le mostrará el mensaje SUCCESS (registro exitoso). En la pantalla del termostato, verá Setup Complete (se ha completado la configuración) durant...
Page 109 - Configuración del ventilador; Presione; opción; Las opciones pueden variar según el
37 69-2718ES—01 Configuración del ventilador Presione Fan (Ventilador) para seleccionar la opción On (Encendido) o Auto (alterne para volver a seleccionar la opción). Auto : el ventilador funciona solo cuando el sistema de calefacción o refrigeración está encendido. La configuración de uso más frecu...
Page 110 - Selección de la modalidad del sistema; Dependiendo
69-2718ES—01 38 Selección de la modalidad del sistema Nota: Dependiendo de la forma como se instaló su termostato, puede que no vea todas las configuraciones del sistema. Presione System (Sistema) para seleccionar una opción. Heat: controla solo el sistema de calefacción. Cool: controla solo el sist...
Page 111 - Ajuste de los cronogramas del programa
39 69-2718ES—01 Ajuste de los cronogramas del programa 1 Presione Set Clock/Day/Schedule (configurar reloj/ día/cronograma) y luego, Set Schedule (configurar cronograma). 2 Presione s o t para configurar la hora de despertarse el lunes (Mon) y luego presione Next (siguiente). 3 Presione s o t para c...
Page 112 - Anulación temporal de los cronogramas
69-2718ES—01 40 Anulación temporal de los cronogramas Presione s o t para ajustar inmediatamente la temperatura.La nueva temperatura se mantendrá solamente hasta que comience el próximo período programado.Para cancelar la configuración temporal en cualquier momento, presione Cancel (Cancelar). El cr...
Page 113 - Anulación permanente de los cronogramas; Presione; cronograma programado.
41 69-2718ES—01 Anulación permanente de los cronogramas 1 Presione HOLD (Mantener) para ajustar permanentemente la temperatura. Esto desactivará el cronograma del programa. 2 Presione s o t para ajustar la temperatura. La temperatura que usted configure se mantendrá las 24 horas del día, hasta que l...
Page 114 - Baja del termostato
69-2718ES—01 42 Baja del termostato Si usted retira el termostato de su cuenta en el sitio Web Total Connect Comfort (por ejemplo, si se muda y deja el termostato), el termostato mostrará el mensaje Register at Total Connect (Registar en Total Connect) hasta que se vuelva a registrar. M33876 69-2718...
Page 115 - Desconexión de la red WiFi; Cambio de su enrutador
43 69-2718ES—01 Desconexión de la red WiFi Cambio de su enrutador Si usted desconecta el termostato de su red WiFi:1 Ingrese a la configuración del sistema (consulte la página 48).2 Cambie la configuración de 39 a 0 (consulte la página 54).La pantalla mostrará Wi-Fi Setup (configuración de WiFi). Pa...
Page 116 - Actualizaciones del software; Porcentaje de; si no está conectado a WiFi, no recibirá
69-2718ES—01 44 Actualizaciones del software Porcentaje de actualización terminado. Honeywell realiza actualizaciones periódicas del software para este termostato. Las actualizaciones se efectúan automáticamente a través de su conexión WiFi. Todas sus configuraciones permanecen guardadas, de modo qu...
Page 117 - antes
45 69-2718ES—01 M33881 Tecnología Smart Response Esta característica permite que el termostato “sepa” cuánto demora el sistema de calefacción/refrigeración en alcanzar las configuraciones de temperatura programadas, de manera que se alcance esa temperatura a la hora que usted configuró.Por ejemplo: ...
Page 118 - Protección del compresor; El mensaje
69-2718ES—01 46 Protección del compresor Esta característica hace que el compresor demore unos minutos antes de volver a iniciarse, para evitar daños al equipo. El mensaje Cool On (refrigeración encendida) (o Heat On [calefacción encendida] para una bomba de calor) destellará durante el período de e...
Page 119 - Conversión automática; la función de configuración del
47 69-2718ES—01 Conversión automática Esta función se usa en climas en donde el acondicionador de aire y la calefacción se utilizan durante el mismo día.Cuando el sistema está configurado en Auto (Automático), el termostato elige automáticamente cuándo calentar o refrigerar, según la temperatura int...
Page 120 - Opciones y funciones de configuración
69-2718ES—01 48 Opciones y funciones de configuración Puede cambiar las opciones en diversas funciones del sistema. Las funciones disponibles dependen del tipo de sistema que usted tenga. Las funciones junto con las opciones disponibles se describen en las páginas 50–54.Este termostato está preconfi...
Page 122 - Configuración del sistema; Función
69-2718ES—01 50 Configuración del sistema (Consulte la página 48 para obtener instrucciones.) Función Configuraciones y opciones 1 Seleccionar el tipo de sistema Si no está seguro sobre el tipo de sistema de calefacción/ refrigeración que tiene o si tiene alguna otra pregunta, visite wifithermostat....
Page 127 - Preguntas frecuentes
55 69-2718ES—01 Preguntas frecuentes : P ¿Mi termostato seguirá funcionando si pierdo la conexión a la red WiFi? : R Sí, el termostato pondrá en funcionamiento el sistema de calefacción o refrigeración con o sin la conexión a la red WiFi. : P ¿Cómo encuentro la contraseña de mi enrutador? : R Comuní...
Page 130 - Localización y solución de problemas; Señal perdida
69-2718ES—01 58 Localización y solución de problemas Señal perdida Si se muestra el indicador no-Wi-Fi en vez del indicador de potencia WiFi en la esquina superior derecha de la pantalla de inicio: • Revise otro dispositivo para verificar que la conexión WiFi está funcionando en su hogar; si no, lla...
Page 131 - Códigos de error
59 69-2718ES—01 Localización y solución de problemas Códigos de error Para ciertos problemas, la pantalla del termostato mostrará un código que identifica el problema. Inicialmente se muestran códigos de error solos en el área de hora de la pantalla; luego de algunos minutos se muestra la pantalla d...
Page 132 - Código de error
69-2718ES—01 60 Localización y solución de problemas M33998 Código de error Acción E42 El enrutador no está emitiendo una dirección IP al termostato. • Espere 30 minutos, puede tomar algunos minutos que se realice la conexión. • Si aún no hay conexión, retire el termostato de la placa de pared duran...
Page 136 - Glosario
69-2718ES—01 64 Glosario Cable C El cable “C”, o común, le transmite 24 V CA al termostato desde el sistema de calefacción/refrigeración. Es posible que algunos termostatos mecánicos o con batería más antiguos no tengan esta conexión de cables. Es necesario para establecer una conexión de la red WiF...
Page 137 - Información sobre normativas
65 69-2718ES—01 Información sobre normativas Declaración de conformidad con las regulaciones FCC (Sección 15.19) (solo en los EE. UU.) Este dispositivo cumple con la Sección 15 de las regulaciones FCC. El funcionamiento está sujeto a las dos condiciones siguientes:1 Este dispositivo no debe causar i...
Page 139 - Garantía limitada de 1 año
67 69-2718ES—01 Garantía limitada de 1 año Honeywell garantiza este producto, a excepción de la batería, por el término de un (1) año contra cualquier defecto de fabricación o de los materiales, a partir de la fecha de compra por parte del consumidor. Si en cualquier momento durante el período de ga...
Page 140 - Automatización y control desenlace
69-2718ES-01 ® Marca Registrada en los E.U.A.Apple, iPhone, iPad, iPod touch y iTunes son marcas comerciales de Apple Inc. Todas las demás marcas comerciales son propiedad de sus respectivos dueños.© 2012 Honeywell International Inc.69-2718ES— 01 M.S. 08-12Impreso en EE. UU. Automatización y control...