Honda 06161 Z44 A30 - User Manual
Honda 06161 Z44 A30 – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Page; CONSUMER INFORMATION:; SAFETY AND EMISSIONS RECALL; FUEL LEAK FROM FUEL VALVE; SYMPTOM; MODEL
- Page 3 – CORRECTIVE ACTION; Units in American Honda Inventory:; If you sold an affected generator and have; not; registered it, please; Units in Dealer Inventory:; Follow the; COUNTERMEASURED; GOOD; Previously repaired generators
- Page 4 – PROCEDURE; DISASSEMBLY
- Page 6 – Remove the left side cover from the generator.
- Page 8 – Remove the hose pinching pliers.
- Page 9 – Seat the lower fuel hose between the tabs.
- Page 10 – step 6 on page 8
- Page 14 – Fill the fuel tank with fuel and check for leaks.
- Page 15 – PARTS INFORMATION; Order parts using your normal parts ordering procedures.; WARRANTY INFORMATION; Duration; A Template Number includes only those parts shown in the; Description
- Page 16 – The following letter was sent to registered customers.
- Page 17 – What to do if you feel this notice is in error.; Power Equipment Division
- Page 18 – Customer Safety and Honda Recalls; Dear Honda Dealer Principal,; Dealer Actions and Requirements:
- Page 19 – IMPORTANT – SAFETY AND EMISSIONS RECALL NOTICE; Affected Serial Number Range:; American Honda Inventory:
American Honda Motor Co., Inc.
SAFETY AND EMISSIONS
RECALL NOTICE
EB2200i • EU2200i Portable Generators
FUEL LEAK FROM FUEL VALVE
Check below to see if your generator is affected by this recall.
What is the problem?
In some EB2200i and EU2200i generators, the screws used to assemble the fuel valve may loosen during use
allowing the valve to leak fuel. If gasoline or gasoline vapors leak, a fire or explosion could occur.
A fuel leak caused by this issue typically is identified by a strong smell before, during, or after operation, or the
presence of fuel underneath the generator.
What should you do?
If you own an EB2200i or EU2200i generator, you will need to check to see if the serial number is within the
affected serial number range and has not been previously repaired. If it is within the affected range and has not
been previously repaired, stop using your generator until it has been repaired by an authorized Honda dealer.
Also:
• If your generator was registered with American Honda and is affected, you will receive a letter.
• If your generator was not registered with American Honda, contact your Honda Power Equipment servicing
dealer.
If you need assistance locating a servicing dealer, please visit our website:
www.PowerEquipment.Honda.com
,
or call us at our recall line (888) 888-3139.
This recall is being conducted in cooperation with the U.S. Consumer Product Safety Commission
Affected
Model
Starting Serial
Number
Ending Serial
Number
EB2200iTA
EAJT-1000001 EAJT-1005474
EU2200iTA
EU2200iTA1
EU2200iTA2
EAMT-1000001 EAMT-1260796
SERIAL
NUMBER
Units previously repaired are no longer part of this recall.
They can be identified by one of the following:
A “green dot” located
on the carton.
A “7EP” label on
the engine cover
OR
A black dot on the
side cover boss.
PTB54942.TO132.2019.03
Post in a prominent location until July 1, 2019
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
© 2019 American Honda Motor Co., Inc.— All Rights Reserved Page 1 of 16 First Issue Date: March 2019 PTB54942.TO132.2019.03 CONSUMER INFORMATION: The information in this service bulletin is intended for use only by skilled technicians who have the proper tools, equipment, and training to correctly a...
Page 2 of 16 © 2019 American Honda Motor Co., Inc.— All Rights Reserved PTB54942.TO132.2019.03 GENERATOR #58 MARCH 2019 CORRECTIVE ACTION If the unit is within the affected serial number range, the fuel valve must be replaced. The countermeasured part can be identified by the absence of the ON/OFF m...
© 2019 American Honda Motor Co., Inc.— All Rights Reserved Page 3 of 16 PTB54942.TO132.2019.03 GENERATOR #58 MARCH 2019 PROCEDURE This procedure requires #2 and #3 size Phillips screwdrivers. Be sure to use the appropriate size screwdriver to prevent damaging the screws. Start all screws by hand to ...
