Holmes 12096 - User Manual

Instruction Manual

Item: 12096

Model: 32510091

PLEASE READ AND SAVE THESE IMPORTANT INSTRUCTIONS

W A R R A N T Y I N F O R M A T I O N

©

2023 Sunbeam Products, Inc. All rights reserved.

HOLMES

®

is a registered trademark of Sunbeam Products, Inc. used under license.

Distributed by Star Elite Inc., Montreal, Canada H3B 3X9

SEH022-013023

Printed In China

3 YEAR LIMITED WARRANTY

This device has a limited warranty of 3 years from the original date of purchase against workmanship and defects in

material. If under normal use, your product fails to operate, please contact our customer service department at

[email protected]. A refund or replacement will be provided to you with proof of purchase. Star Elite Inc. may

deny claims of damage caused by misuse or modifications of this product.

Warranty Service

Contact our customer service at www.getholmesfans.com/en/contact-us

or [email protected] or 1-866-769-3166 (8:30 am - 5:00 pm EST) Monday-Friday.

Our team will be happy to assist.

www.getholmesfans.com

覆膜

上光油

上水油

DOCKET: KT-112

DATE: Dec 22, 2022
ITEM/SKU#: 12096
DESCRIPTION: 16in Outddor Misting Fan
CUSTOMER/RETAILER: Ecom
DESIGNER: XL

FILE TYPE

ALL ARTWORK, DESIGN &
CREATIVE ARE PROPERTY OF:

1175 PLACE DU FRÈRE-ANDRÉ
MONTRÉAL (QUÉBEC)
CANADA H3B 3X9

1 800 890 4076

PKG

PKG FINISHING

Varnish (oil, gloss by default)

NOTE:

Aqueous Coating

Matte

Gloss

IM

RL

PDQ

TRAY

COLOURS

PANTONE COLOR

DIMENSION

PHOTOS

ARTWORK IS THE PROPERTY OF L’IMAGE HOME PRODUCTS INC. Printers changing Pantone spot colors to
CMYK do so at their own risk and expense. Print artwork at 100% from PDF supplied, unless otherwise
specified. Proofs/samples must be sent for approval before mass printing.

DO NOT CHANGE ARTWORK IN ANY WAY.

BEFORE MASS PRODUCTION: ELECTRONIC PDF ARTWORK PROOF MUST

BE SENT TO L’IMAGE HOME PRODUCTS GRAPHICS DEPT FOR APPROVAL.

PROCESS COLOR

DIELINE

Spot-UV

PP Lamination

Other (See notes)

High Res Photo

Matte

Gloss

HEIGHT: 19 cm
WIDTH: 42 cm

BLACK

C L E A N I N G / M A I N T E N A N C E

FAN CLEANING

• Always unplug the fan before cleaning.

• Do not allow water to drip on or into fan housing.

• Use only a soft cloth moistened with a mild soap

solution.

• Do not use harsh chemicals such as gasoline, thinner

or benzene as a cleaner.

FAN BLADE CLEANING

1. Remove the front grill by opening the clips located

around the perimeter.

2. Clean the fan blade, front and rear grills with a soft

cloth moistened with a mild soap solution.

3. Securely fasten the front grill to the rear grill by

closing the clips over the perimeter.

FAN HEAD, BASE AND POLE CLEANING

Using a soft, moist cloth (with or without a mild soap

solution), carefully clean the fan base, pole and head.

Use CAUTION around the housing area. Do not allow the

motor or other electrical components to be exposed to

water.

FAN STORAGE

This fan can be stored either partially disassembled or

assembled.

• Store the fan in a clean, dry location between

seasons or when not in use for an extended period

of time.

• Keep the fan protected from dirt and dust during

storage.

NOTE:

This fan can also be used during the cold winter

season to circulate warm air throughout your home.

For inquiries regarding recycling and proper

disposal of this product, please contact your local

waste management facility.

16 Inch

Outdoor Misting Fan

USER SERVICING INSTRUCTIONS

Follow these instructions to safely and correctly care for

this fan.

REPLACEABLE FUSE

If the (5 Amp, 125 Volt) replaceable fuse blows, please

visit our website at www.getholmesfans.com

for information on how to order a new fuse. Follow the

below instructions to replace the fuse on the plug.

1. Unplug your fan. Grasp plug and remove from the

receptacle or other outlet device. Do not unplug by

pulling on cord.

2. Locate the fuse holder on the power cord. Use

screwdriver to remove the fuse cover and take out

the O-ring (see Figure 4).

Note: Ensure that fuse cover is completely open

before attempting to

remove fuse.

3. Remove fuse carefully

by using a small

screwdriver to pry

the fuse out of the

compartment by the

metal ends of the fuse

(see Figure 4).

4. Place plug on a solid,

flat surface. Insert new

5 Amp, 125 Volt fuse

into fuse compartment

and use a small screwdriver to secure the metal

ends of the fuse into the compartment.

Caution: Risk of fire. Replace fuse only with 5

Amp, 125 Volt fuse.

5. Replace the O-ring, close the fuse cover in place

and secure with the 2 screws (see Figure 4). If fuse

cover is difficult to close, make sure fuse is secured

in place completely by pressing down on metal

ends of the fuse.

CAUTION:

Risk of fire. Do not replace the

attachment plug. It contains a safety device (fuse)

that should not be removed. Discard product if the

attachment plug is damaged.