Hobart SM6T2 ML-110857 - Manual
Hobart SM6T2 ML-110857 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – SAVE THESE INSTRUCTIONS; GENERAL
- Page 3 – INSTALLATION; LOCATION AND LEVELING; Drain Connection
- Page 7 – OPERATION; INTERLOCK; • Make sure the dishwasher tank, the Strainer
- Page 8 – AUTOMATIC DISHWASHING; Allow clean dishes to drain and air-dry before removing from rack.; MANUAL OPERATION; • Turn the heater OFF.
- Page 10 – MAINTENANCE
- Page 11 – TROUBLESHOOTING; SYMPTOM
SM6T2 DISHWASHER
MODEL
SM6T2
ML-110857
SM6T2
7 0 1 S . R I D G E A V E N U E
T R O Y , O H I O 4 5 3 7 4 - 0 0 0 1
9 3 7 3 3 2 - 3 0 0 0
w w w . h o b a r t c o r p . c o m
F O R M 3 4 0 4 7 R e v . A ( J u l y 2 0 0 0 )
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
– 2 – Installation, Operation, and Care of MODEL SM6T2 DISHWASHER SAVE THESE INSTRUCTIONS GENERAL The SM6T2 dishwasher is an electrically controlled, semi-automatic, rack type dishwasher withtelescoping hoods, designed for straight-through operation. The wash and rinse cycles are timed andautomatica...
– 3 – INSTALLATION Immediately after unpacking the dishwasher, check for possible shipping damage. If the machine isfound to be damaged, save the packaging material and contact the carrier within 15 days of delivery. Prior to installation, test the electrical service to make sure it agrees with the ...
– 7 – OPERATION INTERLOCK The hoods are interlocked with the Control Handle (Fig. 1) which prevents operation of the automaticwash and rinse cycle with a hood open. Also, the hoods cannot be opened while the dishwasher is inan automatic wash and rinse cycle. FILLING THE TANK Be sure that the Overflo...
