Hobart ML-136126 - Manual
Hobart ML-136126 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Installation, Operation and Care of; SAVE THESE INSTRUCTIONS; GENERAL
- Page 3 – INSTALLATION
- Page 4 – CLEANING
- Page 5 – ASSEMBLY
- Page 6 – MAINTENANCE; OPERATION
- Page 8 – Installation, fonctionnement et entretien du; CONSERVEZ CE MODE D’EMPLOI; INFORMATIONS GÉNÉRALES
- Page 10 – NETTOYAGE
- Page 11 – MISE EN PLACE; AVIS
7 0 1 S. R I D G E AV E N U E
T ROY, O H I O 4 5 3 7 4 - 0 0 0 1
9 3 7 3 3 2 - 3 0 0 0
w w w. h o b a r t c o r p. c o m
F-35109 Rev. A (April 2014)
MODEL 4822 CHOPPER
ML-136125
ML-136126
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
– 2 – © HOBART, 2014 Installation, Operation and Care of MODEL 4822 CHOPPER SAVE THESE INSTRUCTIONS GENERAL The 4822 Chopper uses a 1 1 / 2 horsepower motor. It will grind 16 lbs. per minute, fi rst cutting, through a 1 / 8 " plate. The 4822 Chopper, with funnel-shaped cylinder, will grind 20 to...
– 3 – INSTALLATION UNPACKING Remove the carton from around the machine. Remove the four bolts holding the machine to the skid. Unpack the chopper cylinder assembly. Immediately after unpacking the chopper, check for possible shipping damage. If this machine is found to be damaged after unpacking, sa...
– 4 – CLEANING Unplug chopper power cord before cleaning. The chopper must be thoroughly cleaned and sanitized after installation and before being placed into service. Cleaning Supplies (Not Provided) Recommended cleaning and sanitizing supplies include: • A 12" handle nylon brush that will slid...
