Hobart FD500 - Manual

Hobart FD500 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1

2

3

4

Page: / 4 Go to

Next Page

PDF Text Table of Contents

Table of Contents:

• Page 2 – FOODWASTE DISPOSERS; ACCESSORY GROUPS; GROUP A; ACCESSORY
• Page 3 – ELECTRICAL CONTROL GROUPS; AVAILABLE ELECTRICAL
• Page 4 – DETAILS AND DIMENSIONS

Loading the manual

Item # _____________________________________
Quantity ___________________________________

C.S.I. Section 11400

F-8391 – FD500 Foodwaste Disposers

Page 1 of 4

FD500

FOODWASTE DISPOSERS

701 S Ridge Avenue, Troy, OH 45374

1-888-4HOBART • www.hobartcorp.com

FD500 FOODW

ASTE DISPOSERS

POWERFUL AND DEPENDABLE

Peak periods for the large food service establish-
ment can be very demanding on any foodwaste
disposer. This powerful disposer has a large
capacity for foodwaste. Hobart has engineered the
5 horsepower unit to perform dependably during
peak demands for economical foodwaste disposal.

SPECIFICATIONS

Listed by Underwriters Laboratories Inc. and meets requirements of
A.S.S.E. Standard No. 1009. (50 Hz. Electrical Specifications not available
with thermal overload protection nor submitted for UL listing.)

MOTORS:

Continuous duty rating. Permanently

lubricated bearings (matched set double row
tapered roller bearings for upper shaft thrust
support, ball bearings for lower shaft support).
Inherent overload protection in motor.

HOUSINGS:

Heavy aluminum grind and discharge

housings. Eight bolts fasten the motor unit to the
grind chamber, permit easy removal.

MOUNTING:

Disposer fastens to 7" I.D. throat

opening cones. A vinyl isolating ring eliminates
metal-to-metal contact at the cone mounting,
reduces vibration and noise transmission.

STATIONARY SHREDDER RING:

Ni-Hard, 2

1

⁄

2

"

high, 4 machine ground primary action breaker
bars, 42 secondary action grinding teeth.

FLYWHEEL:

Breaker blade, mounted at center,

speeds grinding, prevents objects from “riding” at
center. Two hardened stainless steel cutter blocks
(fastened to flywheel with Nyloc screws) are
replaceable, can be indexed for new cutting edges.
Ni-Resist flywheel is 9" diameter, slots undercut the
hredder ring to assure that particles are cut to
proper size before passing to the drain line.

MOTOR SHAFT SEAL:

Face-type seal consists of

sintered bronze mating ring and spring loaded
carbon ring insert in chemical resistant neoprene
bellows. Mating surfaces are protected from grit of
fibers by being recessed into flywheel. Should any
moisture pass this seal, a flinger and drain tube are
provided to insure immediate removal. In addition,
a lip-type oil seal (located beneath the bearings) is
an “added protection” water seal.

DRAIN CONNECTOR:

The removable outlet flange

is tapped for 3" pipe connection.

DUAL DIRECTION GRINDING:

Disposer flywheel

operates in either direction. When installed with
Control Groups 2 & 3, flywheel automatically starts
in opposite direction each start. (Increases life and
efficiency of grinding elements and frees flywheel of
jams.)

R

Other Hobart Models

• Hobart 1870
  • Manual
• Hobart FT900S
  • Manual
• Hobart HCR40
  • Manual
• Hobart ML-110301 FD3-150 ML-110305 FD3-200 ML-110309 FD3-300
  • Manual
• Hobart SLA-3 ML-44192
  • Manual
• Hobart 625
  • Manual
• Hobart HGF85 ML-126997
  • Manual
• Hobart OM-487
  • Manual
• Hobart HEC5D ML-126751
  • Manual
• Hobart 5016
  • Manual