Hitachi CP-X3014WN - Manual
Hitachi CP-X3014WN – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Data Data; Initial set signals
- Page 3 – Connection to the ports; NOTICE; COMPUTER IN1; or; MONITOR OUT
- Page 8 – RS-232C Communication; Connection; Turn off the projector and the computer.; CONTROL; CONTROL
- Page 9 – Communicaion settings; Byte Number; above
- Page 11 – LAN; port to the computer's; USB TYPE A; NOTE; Command Control via the Network
- Page 12 – Communicaion Por t; The following two ports are assigned for the command control.; Port Settings; Security Settings
- Page 13 – Command control settings; Header; Refer to RS-232C Communication command format (
- Page 14 – “password” and it becomes “a572f60cpassword”.
- Page 15 – Network Guide; OPTION menu; Network Bridge Communication
- Page 16 – Communication settings; Operating; Transmission method
- Page 31 – PJLink command
1
Projector
CP-X2514WN/CP-X3014WN/
CP-X4014WN/CP-WX3014WN
User's Manual (detailed)
Operating Guide – Technical
Resolution (H x V)
H. frequency (kHz)
V. frequency (Hz)
Rating
Signal mode
720 x 400
37.9
85.0
VESA
TEXT
640 x 480
31.5
59.9
VESA
VGA (60Hz)
640 x 480
37.9
72.8
VESA
VGA (72Hz)
640 x 480
37.5
75.0
VESA
VGA (75Hz)
640 x 480
43.3
85.0
VESA
VGA (85Hz)
800 x 600
35.2
56.3
VESA
SVGA (56Hz)
800 x 600
37.9
60.3
VESA
SVGA (60Hz)
800 x 600
48.1
72.2
VESA
SVGA (72Hz)
800 x 600
46.9
75.0
VESA
SVGA (75Hz)
800 x 600
53.7
85.1
VESA
SVGA (85Hz)
832 x 624
49.7
74.5
Mac 16” mode
1024 x 768
48.4
60.0
VESA
XGA (60Hz)
1024 x 768
56.5
70.1
VESA
XGA (70Hz)
1024 x 768
60.0
75.0
VESA
XGA (75Hz)
1024 x 768
68.7
85.0
VESA
XGA (85Hz)
1152 x 864
67.5
75.0
VESA
1152 x 864 (75Hz)
1280 x 768
47.7
60.0
VESA
W-XGA (60Hz)
1280 x 800
49.7
60.0
VESA
1280 x 800 (60Hz)
1280 x 960
60.0
60.0
VESA
1280 x 960 (60Hz)
1280 x 1024
64.0
60.0
VESA
SXGA (60Hz)
1280 x 1024
80.0
75.0
VESA
SXGA (75Hz)
*1 1280 x 1024
91.1
85.0
VESA
SXGA (85Hz)
*2 1400 x 1050
65.2
60.0
VESA
SXGA+ (60Hz)
1440 x 900
55.9
59.9
VESA
WXGA+ (60Hz)
*3 1680 x 1050
65.3
60.0
VESA
WSXGA+ (60Hz)
*1 1600 x 1200
75.0
60.0
VESA
UXGA (60Hz)
*1) Supported except for HDMI input.
*2) Only for CP-X2514WN, CP-X3014WN and CP-X4014WN. *3) Only for CP-WX3014WN.
Example of computer signal
NOTE
• Be sure to check jack type, signal level, timing and resolution before
connecting this projector to a computer.
• Some computers may have multiple display screen modes. Use of some of these
modes will not be possible with this projector.
• Depending on the input signal, full-size display may not be possible in some cases.
Refer to the number of display pixels above.
• Although the projector can display signals with resolution up to UXGA (1600x1200), the signal
will be converted to the projector ’s panel resolution before being displayed. The best display
performance will be achieved if the resolutions of the input signal and projector panel are identical.
• Automatic adjustment may not function correctly with some input signals.
• The image may not be displayed correctly when the input sync signal is a composite
sync or a sync on G.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Initial set signals Back porch (B) Front porch (D) Back porch (b) Front porch (d) Active video (C) Data Data H. Sync. V. Sync. Sync (A) Sync (a) Active video (c) Resolution (H x V) Horizontal signal timing (μs) Vertical signal timing (lines) Signal mode (A) (B) (C) (D) (a) (b) (c) (d) 720 x 400 2....
3 A COMPUTER IN1, B COMPUTER IN2, C MONITOR OUT D-sub 15pin mini shrink jack <Computer signal>• Video signal: RGB separate, Analog, 0.7Vp-p, 75Ω terminated (positive)• H/V. sync. signal: TTL level (positive/negative)• Composite sync. signal: TTL level <Component video signal>• Video sign...
8 ① ② ⑥ ⑦ ⑧ ⑨ ⑤ ④ ③ CD (1) (1) − RD(2) (2) RD TD (3) (3) TD DTR (4) (4) − GND (5) (5) GND DSR (6) (6) − RTS (7) (7) RTS DTS (8) (8) CTS RI (9) (9) − RS-232C Communication RS-232C Communication When the projector connects to the computer by RS-232C communication, the projector can be controlled with ...