Hilti 3611270 - User Manual

Page 3 - Information about the documentation; DANGER

English 1 1 Information about the documentation 1.1 About this documentation • Read this documentation before initial operation or use. This is a prerequisite for safe, trouble-free handling and use of the product. • Observe the safety instructions and warnings in this documentation and on the produ...

Page 5 - Safety; Personal safety

English 3 1.5 Product information products are designed for professional users and only trained, authorized personnel are permitted to operate, service and maintain the products. This personnel must be specifically informed about the possible hazards. The product and its ancillary equipment can pres...

Page 8 - English

6 English Printed: 24.05.2018 | Doc-Nr: PUB / 5341998 / 000 / 02

Page 10 - Description; Product overview

8 English 3 Description 3.1 Product overview 3.1.1 Gasoline-powered cut-off saw Printed: 24.05.2018 | Doc-Nr: PUB / 5341998 / 000 / 02

Page 12 - Technical data

10 English 3.7 Saw blade brake DSH 600-X The product is equipped with an integrated saw blade brake to increase operator safety. The saw blade is braked to a standstill in a maximum of 10 seconds after the throttle safety grip is released. Releasing the throttle safety grip when the tool is running ...

Page 13 - Before use

English 11 Cutting disc arbor size / diameter of centering bush 0.8 in (20 mm) Cutting disc arbor size / diameter of centering bush 1.00 in (25.4 mm) Minimum flange outside diameter for diamond cutting discs (only for steel-core discs; the flanges are marked with “FOR DIAMOND ABRASIVE STEEL CORE WHE...

Page 16 - Flying fragments or sparks could cause injury.

14 English 7. Select one of the following alternatives. ▶ Use only the large flange to secure the abrasive cutting disc. ▶ Use the small flange with diamond cutting discs in order to utilize the full cutting depth. 8. Place the cutting disc with centering collar on the drive arbor and check that the...

Page 18 - Operation; Starting the engine

16 English 5.2.5 Fitting the wheel set (accessory) 1. Slacken the two bottom securing screws on the metal guard. 2. Secure the base plate with the two screws. 3. Secure the wheels and washers with the screws on both sides of the base plate. 6 Operation 6.1 Starting the engine DANGER Risk of asphyxia...

Page 22 - Care and maintenance; WARNING

20 English • Pulling may occur when making horizontal cuts (e.g. in a floor). The saw may suddenly pull forwards, possibly pulling it out of the operator’s hands. • Climbing may occur when making vertical cuts (e.g. in a wall). The saw may suddenly pull upwards, possibly pulling it out of the operat...

Page 27 - Transport and storage; Troubleshooting

English 25 7.10 Checks after care and maintenance work ▶ After carrying out care and maintenance, check that all protective and safety devices are fitted and that they function faultlessly. 8 Transport and storage 8.1 Transporting the product in a vehicle DANGER Risk of fire and explosion. If the pr...

Hilti 3611270 - User Manual

Table of Contents:

Summary

Other Hilti Concrete Saws Models