Hansgrohe 35807801 - Manual

Hansgrohe 35807801

Hansgrohe 35807801 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
Page: / 8

Table of Contents:

  • Page 2 – In Massachusetts, the water heater may be set no higher than 11; Axor Steel Kitchen Faucet
  • Page 3 – Preparation for Installation:
  • Page 4 – connect the hot and cold supply hoses to the
  • Page 5 – User Instructions; Set the High Temperature Limit Stop
  • Page 7 – Limited Lifetime Consumer Warranty; Cleaning Recommendation for Hansgrohe Products; Cleaning Materials for Faucets and Showers
  • Page 8 – 490 Bluegrass Lakes Parkway
Loading the manual

Installation Instructions / Warranty

Axor Steel

35807801

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - In Massachusetts, the water heater may be set no higher than 11; Axor Steel Kitchen Faucet

Installer Notes: Significant pressure differences between the hot and cold water supplies should be corrected. The supply hoses on this faucet require 3/8” compression fittings (not included). Backflow prevention is provided by check valve in the sprayhead. Max water pressure 145 PSI Recommended wat...

Page 3 - Preparation for Installation:

3 Install the faucet: Position the faucet and sealing ring on top of the mounting surface. From beneath, install the plastic washer, slide washer and metal washer. Thread on the collar nut loosely. If the total thickness of the mounting surface is greater than 1 3/8”, omit the plastic washer. Inspec...

Page 4 - connect the hot and cold supply hoses to the

4 Connect the handspray hose: Loosen the compression fitting on the end of the flexible handspray hose. Slide it onto the end of the handspray supply hose. While holding the hose still with a 1 mm wrench, tighten the nut with a 17 mm wrench. Do noT aLLoW THe HoSe To TWIST. IF THe HoSe TWISTS, THe FL...

Other Hansgrohe Models

All Hansgrohe Other