Hansgrohe 35807801 - Manuals

Installer Notes: Significant pressure differences between the hot and cold water supplies should be corrected. The supply hoses on this faucet require 3/8” compression fittings (not included). Backflow prevention is provided by check valve in the sprayhead. Max water pressure 145 PSI Recommended wat...

3 Install the faucet: Position the faucet and sealing ring on top of the mounting surface. From beneath, install the plastic washer, slide washer and metal washer. Thread on the collar nut loosely. If the total thickness of the mounting surface is greater than 1 3/8”, omit the plastic washer. Inspec...

4 Connect the handspray hose: Loosen the compression fitting on the end of the flexible handspray hose. Slide it onto the end of the handspray supply hose. While holding the hose still with a 1 mm wrench, tighten the nut with a 17 mm wrench. Do noT aLLoW THe HoSe To TWIST. IF THe HoSe TWISTS, THe FL...