Page 2 - Table of Contents
Table of Contents 1 1 . R e g u l a t o r y I n f o r m a t i o n . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 . D e s c r i p t i on o f W a r n i n g S y m b o l s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....
Page 4 - Regulatory Information; FCC Compliance Statement; WARNING
3 1 Regulatory Information FCC Compliance Statement 1 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that m...
Page 5 - DOC Compliance Notice; Regulations of the Canadian Department of Communications.This; CE Conformity Statement; This device complies with the requirements set out in the Council
4 DOC Compliance Notice 1 This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications.This device complies with Canada ICES-003 Class B. CE Conformity Statemen...
Page 6 - Description of Warning Symbols; Before You Proceed; Read all Safety Notices in Section 3 of this manual and; CAUTION
5 2 Description of Warning Symbols Before You Proceed 1. Read all Safety Notices in Section 3 of this manual and instructions in the User ’s Manual carefully before either plugging in or turning the TV on. 2. Keep this User ’s Manual in a safe place for future reference. Keep the box and packaging i...
Page 7 - Safety Notices; Electric Power Notice
6 3 Safety Notices Electric Power Notice Electric power may cause personal injury and mechanical damage if misused. Although safety has been taken into consideration during the design and production of this TV, electric shock or fire can result if the TV is misused. To prevent potential danger, read...
Page 8 - Installation Safety Notes; Antenna; Power
7 Installation Safety Notes Antenna We suggest that you use an outdoor antenna to get the best signal possible unless you have cable TV or a centralized indoor antenna system. You may, however, use an antenna indoors if it is placed in a location free from interference. Location Avoid prolonged expo...
Page 9 - IMPORTANT SAFETY INSTRUCTIONS
8 IMPORTANT SAFETY INSTRUCTIONS 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with dry cloth. 7 Do not block any ventilation openings. Install in accordance with manufacturer ’s instructions....
Page 11 - Personal Safety; Do not allow children to use the TV unattended.
10 Personal Safety To avoid overloading the power supply, never plug too many electrical devices into an outlet, power strip, or extension cable. Dangerous high-voltage electric power components are located inside the TV. To avoid electric shock, do not disassemble the TV in any way. Do not place or...
Page 12 - Installation
11 Installation Do not place the TV in locations where there is excessive steam or dust. Avoid blocking the TV's vents, do not place the TV on a bed, sofa, carpet, or in a sealed cabinet. Install the outdoor antenna (not included) away from power transmission lines to avoid possible danger. Unplug t...
Page 14 - Preface; (LCD TV). Your new TV will allow you to enjoy superior audio and video
13 4 Preface Thank you for purchasing a Hannspree Liquid Crystal Display Television (LCD TV). Your new TV will allow you to enjoy superior audio and video while enriching your lifestyle with advanced technology. Please carefully read this manual in its entirety before setting up, using or operating ...
Page 15 - Copyright
14 Copyright © Copyright 2005 Hannspree, Inc. All rights reserved. This manual is protected by copyright and distributed under licenses restricting its use, copying and distribution. No part of this manual may be reproduced in any form by any means without the prior written authorization of Hannspre...
Page 16 - Introducing the TV; Features; Built-in stereo speakers
15 5 Introducing the TV Thank you for purchasing this LCD TV. Your LCD TV is designed to be safe, versatile, and easy to use. The design makes it a fun addition to any room. You can watch broadcast or cable television channels, and easily connect a VCR, VCD, DVD player or a game device to the standa...
Page 17 - Checking Package Contents
16 6 Checking Package Contents Make sure the following components are included in the box. Please contact Hannspree Customer Service immediately if anything is missing or damaged. • TV • User’s manual • Quick start guide • Warranty and service manual • Power cord • Power adapter • 4-IN-1 A/V cable •...
Page 18 - Getting Started; Control Panel; S O UR C E
17 7 Getting Started Control Panel De s c r i p t i o n I co n F u n c t i o n Power Turns the TV on and off. Power LED Indicates power status. Source S O UR C E Selects the input source to be displayed:(TV, AV1, AV2 or AV2s) / (TV, AV or AVs) Note: If S-Video is connected, the TV autodetects it and...
Page 19 - Input and Output Jacks; De s c r i p t i o n
18 Input and Output Jacks De s c r i p t i o n C o n n e c t o r F u n c t i o n 4-IN-1 (AV / AV2) Use the included 4-IN-1 A/V cable to connect external devices, such as a VCR, VCD, DVD player, CVBS RCA cables or a game device. Audio Input: AV connector audio (white and red) cables. Video Input: AV ...
Page 20 - Remote Control; Description; VOL VOL
19 Remote Control Description Icon Function Menu Press this button to activate the OSD menu system and to adjust various settings and personal preferences. Arrow / / / / < / > Press / / and to scroll through the on-screen display menus. Favorite channels can be selected using the and buttons o...
Page 21 - RESET; Sleep
20 Select channel Changes channels. Press channel up to increase the channel number. Press channel down to decrease the channel number. In AV mode, press either button to return to TV mode. Source Press this button to cycle the video input sources. The source is displayed on the screen. Auto (select...
Page 22 - Inser ting the Remote Control Batter y/Batteries; Insert the batteries paying attention to the; For lithium batteries:; Insert the battery / batteries with the positive; AAA batteries
21 Inser ting the Remote Control Batter y/Batteries 1 Open the battery compartment cover at the back of the remote control (A). 2 For AAA batteries: Insert the batteries paying attention to the polarity markings inside the battery compartment (B). For lithium batteries: Insert the battery / batterie...
Page 24 - Making Connections; Connecting to an Antenna or Cable TV; Connect one end of the VHF/UHF (Antenna) or CATV cable to ANT
23 8 Making Connections Connecting to an Antenna or Cable TV 1 Connect one end of the VHF/UHF (Antenna) or CATV cable to ANT Jack (VHF/UHF IN Jack) on the back of the TV. 2 Connect the other end of the VHF/UHF (Antenna) or CATV cable to the antenna socket or CATV cable. NoteIf you cannot receive cha...
Page 25 - Connecting to AV Devices; Note
24 Connecting to AV Devices Connect external devices such as a VCR, VCD, DVD player, or video game console to the TV using the supplied 4-IN-1 A/V cable. Connecting to a VCR/VCD/DVD Player The illustration presented here shows how to connect the TV to a VCR, VCD or DVD player. Actual connections may...
Page 26 - Connecting to a Video Camera; AV connectors
25 Connecting to a Video Camera The instructions presented here are a general guide to connecting the TV to a camcorder or other type of digital camera. Actual connections may vary according to the make and model of the device. Refer to the user’s manual included with the camcorder or camera for mor...
Page 27 - Connecting to a Video Game Console; Notes; W Y
26 Connecting to a Video Game Console The instructions presented here are a general guide to connecting the TV to a game console using the RCA Jacks (some game devices may require a unique adapter that is not provided). Actual connections may vary according to the make and model of the game device. ...
Page 28 - Connecting Exter nal Speakers or Headphones; Headphones
27 Connecting Exter nal Speakers or Headphones External speakers or headphones may be used to listen to the TV rather than using the built-in speakers. Connect external speakers with built-in amplifier to the speaker line out port or headphones to the headphone port as illustrated. Notes • External ...
Page 29 - Connecting the Power Adapter; Connect the power cord to the power adapter as illustrated.
28 Connecting the Power Adapter 1 Connect the power cord to the power adapter as illustrated. 2 Plug the power adapter connector into the DC-IN input jack on the rear panel of the TV. 3 Insert the three-pronged plug at the other end of the power cord into a power outlet. Note Images are for illustra...
Page 30 - Using the TV; Using the Remote Control; Tur ning the TV On and Off; Press power; Selecting Channels; Press source to select the incoming source signal.; Adjusting the Volume
29 9 Using the TV Using the Remote Control For best results, use the remote control within a distance of 16 feet (5 meters) from the front of the TV. Do not exceed an angle of 30 degrees when pointing at the TV. Notes • The operational distance may be shortened when the signal sensor is directly exp...
Page 31 - Settings; TV & Remote Control Buttons; – Menu
30 10 Adjusting On-Screen Display (OSD) Settings The On-Screen Display (OSD) menu system provides a quick and simple method to adjust your TV’s settings. This chapter describes how to change each of the available settings. TV & Remote Control Buttons You may adjust the setting from your remote c...
Page 32 - OSD Function Menu; displays
31 OSD Function Menu The following illustration helps you become acquainted with OSD menu items. The following menus can be set using different adjustment methods, which are described in the instructions. Picture Preset Video Mode User NR Off Color Temp Neutral Contrast Brightness Saturation Hue Sha...
Page 33 - Picture Setting; CH UP
32 Picture Setting Press menu to enter the OSD menus. 1 Press CH UP or CH DOWN to select Picture Setting. 2 Press VOL UP to enter the Picture Setting menu. Picture Preset Video Mode User NR Off Color Temp Neutral Contrast Brightness Saturation Hue Sharpness 40 47 40 25 04 Adjust : Select : CH VOL Re...
Page 34 - Video Mode
33 Video Mode 1 Press VOL UP or VOL DOWN to switch between Video Mode options: User: Enables you to set user defined values. Dynamic: Sets the display for enhanced picture contrast and sharpness (default). Standard: Sets the display for normal viewing (default). Movie: Sets the display to emulate a ...
Page 36 - Preset
35 Preset Preset erases all customized picture settings and returns all values to factory defaults. 1 Press CH UP or CH DOWN to select Preset. 2 Press VOL UP to reset all picture settings to factory defaults. “OK” appears on the screen. 3 Press menu to confirm the setting. NoteThe new setting is con...
Page 37 - Audio Setting
36 Audio Setting Press menu to enter the OSD menus. 1 Press CH UP or CH DOWN to select Audio Setting. 2 Press VOL UP to enter the Audio Setting menu. Audio Preset Equalizer User Surround Off Balance 0 100Hz 330Hz 1KHz 3.3KHz 6.6KHz +07 +07 +07 +07 +07 Adjust : Select : CH VOL Return : MENU
Page 38 - Equalizer
37 Equalizer 1 Press VOL UP or VOL DOWN to switch between Equalizer options: User: Enables you to set user defined values. Movie: Sets the audio to accommodate movies (default). Music: Sets the audio to accommodate music (default). Hall: Sets the audio to accommodate a hall environment (default). Fl...
Page 41 - TV Setting
40 TV Setting Press menu to enter the OSD menus. 1 Press CH UP or CH DOWN to select TV Setting. 2 Press VOL UP to enter the TV Setting menu. TV System B/G CH Skip Auto Program Fine Tune Fav. CH Enter : Select : CH VOL Return : MENU
Page 42 - Use the System function to
41 System Use the System function to determine the PAL signal type The signal type will be detected automatically: B/G, D/K, or I. TV System B/G CH Skip Auto Program Fine Tune Fav. CH Enter : Select : CH VOL Return : MENU
Page 43 - Channel Skip
42 Channel Skip 1 Press CH UP or CH DOWN to select CH Skip. 2 Press VOL UP to enter the CH Skip submenu. 3 Press CH UP or CH DOWN to select Channel. 4 Press VOL UP or VOL DOWN to select the channel you want to modify. 5 Press CH UP or CH DOWN to select Skip. 6 Press VOL UP or VOL DOWN to turn channe...
Page 44 - Auto Program
43 Auto Program 1 Press CH UP or CH DOWN to select Auto Program. 2 Press VOL UP to begin auto programming. 3 The TV will search for all available channels and add them to the channel list. 4 Press menu to confirm the setting. NoteThe new setting is confirmed automatically when the OSD times out. TV ...
Page 45 - Fine Tune
44 Fine Tune 1 Press CH UP or CH DOWN to select Fine Tune. 2 Press VOL UP to enter the Fine Tune submenu. 3 Press CH UP or CH DOWN to select Channel. 4 Press VOL UP or VOL DOWN to select the channel you want to modify. 5 Press CH UP or CH DOWN to select Frequency. 6 Press VOL UP or VOL DOWN to adjus...
Page 46 - Favorite Channel
45 Favorite Channel 1 Press CH UP or CH DOWN to select Fav. CH. 2 Press VOL UP to enter the Fav. CH Setting submenu. 3 Press CH UP or CH DOWN to select the Favorite channel you want to modify (1 ~ 4). 4 Press VOL UP or VOL DOWN to select the channel you want to set as the favorite channel for that n...
Page 47 - Customize Setting
46 Customize Setting Press menu to enter the OSD menus. 1 Press CH UP or CH DOWN to select Customize. 2 Press VOL UP to enter the Customize Setting menu. Customize Sleep Timer Off OSD Timeout Language 10 sec English Adjust : Select : CH VOL Return : MENU
Page 49 - Language
48 Language 1 Press CH UP or CH DOWN to select Language. 2 Press VOL UP or VOL DOWN to select an OSD language: English 3 Press menu to confirm the setting. NoteThe new setting is confirmed automatically when the OSD times out. Customize Sleep Timer 30min OSD Timeout Language 10 sec English Adjust : ...
Page 51 - Troubleshooting; S i t u a t i o n
50 12 Troubleshooting S i t u a t i o n S o l u t i o n No picture and sound. • Connect the power cord properly. • Check if the power LED is on or not. • Press power on the control panel or remote control. • Press source to cycle through connected video sources. • Press channel up or channel down to...
Page 53 - Warranty and Service
52 13 Warranty and Service For complete warranty service information, please refer to the “Warranty and Service Manual” enclosed with your TV.
Page 54 - Specifications
53 14 Specifications 9.6 / 12.1–inch LCD TV LCD Panel Size 9.6 / 12.1–inch TFT Aspect Ratio 4:3 Display Resolution 9.6-inch: 800 (horizontal) x 600 (vertical) 12.1-inch: 640 (horizontal) x 480 (vertical) TV System PAL Video System S-Video Input and Composite Video Input (through the 4-IN-1 A/V cable...
Page 55 - Glossary; LCD
54 15 Glossary Aspect Ratio: The ratio of width to height of a film, image or display screen. Color Temperature: Adjusting the color temperature enables you to set the intensity of white light. Color temperature is measured in Kelvin (K). Higher color temperatures result in a blue tint. Lower temper...
Page 56 - MEMO
