HANNspree HF257 - Manuals

HANNspree HF257 – Manual in PDF format online.

Manuals:

Manual

Manual HANNspree HF257

Summary

Page 2 - User’s Manual; FCC Class B Radio Frequency Interference Statement; Reorient or relocate the receiving antenna.; CANADA

User’s Manual 2 Before operating the monitor, please read this manual thoroughly. This manual should be retained for future reference. FCC Class B Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part ...

Page 3 - Ergonomics; Electrical safety; Emissions; Low electromagnetic fields surrounding the display; Ecology; and

User’s Manual 3 Congratulations! The product you have just purchased carries the TCO’06 Media Displays label. This means that your display is designed and manufactured according to some of the strictest performance and environmental criteria in the world. The manufacturer of this display has selecte...

Page 4 - RECYCLING INFORMATION; HANNspree; For more information, please visit

User’s Manual 4 RECYCLING INFORMATION We, the HANNspree care very much about our environment protection strategy and firmly believe that it helps us have healthier earth via appropriate treatment and recycling of industrial technology devices at the end-of-life. These devices contain recyclable mate...

Page 5 - TABLE OF CONTENTS

User’s Manual 5 TABLE OF CONTENTS SAFETY NOTICE .................................................................................................. 6 PRECAUTIONS................................................................................................. 6 SPECIAL NOTES ON LCD MONITORS .............

Page 6 - SAFETY NOTICE; PRECAUTIONS; will protect the monitor from damage due to power surges.

User’s Manual 6 SAFETY NOTICE 1. The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits. 3. ...

Page 7 - SPECIAL NOTES ON LCD MONITORS; less such as a missing pixel or a pixel lit all of the time.

User’s Manual 7 SPECIAL NOTES ON LCD MONITORS The following symptoms are normal with LCD monitor and do not indicate a problem. • Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disapp...

Page 8 - BEFORE YOU OPERATE THE MONITOR; FEATURES; LCD Monitor

User’s Manual 8 BEFORE YOU OPERATE THE MONITOR FEATURES • 25” Wide screen TFT Color LCD Monitor • Crisp, Clear Display for Windows • Recommended Resolutions : 1920X1080 @60Hz • EPA ENERGY STAR ® • GP Green Product • Ergonomic Design • Space Saving, Compact Case Design CHECKING THE CONTENTS OF THE PA...

Page 9 - INSTALLATION INSTRUCTIONS; INSTALL; POWER

User’s Manual 9 INSTALLATION INSTRUCTIONS INSTALL REMOVE Figure.1. Installing and Removing the Base INSTALLATION: 1. Turn the monitor over and set it upside down. 2. Align the monitor to the slots on the stand. 3. Please note that the longer edge of the stand should be facing forward. 4. Pull the sc...

Page 10 - MAKING CONNECTIONS; CONNECTING TO A PC

User’s Manual 10 MAKING CONNECTIONS CONNECTING TO A PC Turn off your computer before performing the procedure below. 1. Connect one end of the VGA cable to the back of the monitor and connect the other end to the computer’s VGA port. 2. Connect one end of the HDMI to DVI-D cable (Dual input mode opt...

Page 11 - ADJUSTING THE VIEWING ANGLE; monitor’s angle to your own preference.

User’s Manual 11 ADJUSTING THE VIEWING ANGLE • For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor’s angle to your own preference. • Hold the stand so you do not topple the monitor when you change the monitor’s angle. • You are able to adjust the mo...

Page 12 - OPERATING INSTRUCTIONS; GENERAL INSTRUCTIONS; Analog Input Models

User’s Manual 12 OPERATING INSTRUCTIONS GENERAL INSTRUCTIONS Press the power button to turn the monitor on or off. The other control buttons are located on the front panel of the monitor (See Figure 4). By changing these settings, the picture can be adjusted to your personal preferences. • The power...

Page 13 - FRONT PANEL CONTROL; Adjust

User’s Manual 13 FRONT PANEL CONTROL • Power Button: Press this button to switch ON/OFF of monitor’s power. • Power Indicator: Blue — Power On mode. Orange — Power Saving mode. • MENU / RETURN: 1. Turn the OSD menu on/off or return to the previous menu. 2. Exit OSD menu when in volume OSD status. • ...

Page 14 - Resolution; to ship your monitor.

User’s Manual 14 Resolution 640x400@70Hz ↔ 720x400@70Hz 640x480@60Hz ↔ 720x480@60Hz 1024x768@70Hz ↔ 1280x768@70Hz 1280x768@60Hz ↔ 1360x768@60Hz 1400x1050@60Hz ↔ 1680x1050@60Hz 1400x1050@RB 60Hz ↔ 1680x1050@RB 60Hz 1400x1050@75Hz ↔ 1680x1050@75Hz ** The screen resolutions available will depend on the...

Page 15 - HOW TO ADJUST A SETTINGS; BRIGHTNESS/ CONTRAST

User’s Manual 15 HOW TO ADJUST A SETTINGS BRIGHTNESS/ CONTRAST BRIGHTNESS Adjust the brightness value of the display according to your preference. Select 「 BRIGHTNESS 」 option to adjust the brightness value. CONTRAST Adjust the contrast value of the display according to your preference. Select 「 CON...

Page 16 - INTERMEDIATE; [This feature is limited to

User’s Manual 16 H-POSITION Select the 「 H-POSITION 」 option to shift the screen image to the left or right. Enter the option and adjust the level. [For VGA only] V-POSITION Select the 「 V-POSITION 」 option to shift the screen image up or down. Enter the option and adjust the level. [For VGA only] C...

Page 18 - PLUG AND PLAY

User’s Manual 18 PLUG AND PLAY Plug & Play DDC2B Feature This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its...

Page 19 - Q & A FOR GENERAL PROBLEMS

User’s Manual 19 TECHNICAL SUPPORT (FAQ) Q & A FOR GENERAL PROBLEMS PROBLEM & QUESTION POSSIBLE SOLUTION Power LED is not on *Check if the Power Switch is in the ON position. *Power Cord should be connected. No Plug & Play *Check if the PC system is Plug & Play compatible. *Check if ...

Page 21 - ERROR MESSAGE & POSSIBLE SOLUTIONS; CABLE NOT CONNECTED :; Check the signal-cable’s connection pins for damage.; MODE

User’s Manual 21 ERROR MESSAGE & POSSIBLE SOLUTIONS CABLE NOT CONNECTED : 1. Check that the signal-cable is properly connected, If the connector is loose, tighten the connector’s screws. 2. Check the signal-cable’s connection pins for damage. INPUT NOT SUPPORT : Your computer has been set to...

Page 23 - APPENDIX; SPECIFICATIONS

User’s Manual 23 APPENDIX SPECIFICATIONS Driving system TFT Color LCD Size 25"(24 . 6" viewable) LCD Panel Pixel pitch 0.283mm(H) x 0.283mm(V) H-Frequency 24KHz – 83KHz Video V-Frequency 48 – 75Hz Display Colors 16.7M Colors Max. Resolution 1920X1080 @60Hz Plug & Play VESA DDC2B TM ON Mo...