Page 2 - Table of Contents
Table of Contents 1 1 . W a r r a n t y a n d S e r v i c e . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 . P r e f a c e . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....
Page 4 - Hannspree global customer service center telephone number:; Warranty and Service
3 The instructions on this manual are for the model(s) listed on the front cover. Before you start reading, check your product number by looking at the rear of your TV. Thank you for purchasing our Liquid Crystal Display Television (LCD TV). With this product, you will be able to enjoy superior audi...
Page 5 - Copyright; use, copying, and distribution. No part of this documentation may be; Preface
4 This manual is designed to assist users in setting up and using the LCD TV. Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. Copyright © Cop...
Page 6 - Electric Power Notice; Warning; Description of Warning Symbols
5 Electric Power Notice Electric power may cause personal injury and mechanical damage if it is misused. Although safety has been taken into consideration during the design and production of this product, electric shock or fire can result when the product is misused. To prevent potential danger, fol...
Page 7 - Antenna; Safety Notices
6 Power Supply Safety Notes 1. To avoid electric shocks, do not use an extended power cord or an outlet that does not match this product's plug or leaves the plug exposed. 2. This product has a 3-pin grounded plug. The third pin connects to ground; do not remove it. 3. If the power cord or plug is d...
Page 9 - Optimal Viewing Distance
Page 10 - Important Safety Instructions
9 Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer ’s ...
Page 12 - Personal Safety
11 Personal Safety To avoid overloading the power supply, do not plug too many electrical devices into an outlet or extension cable. Dangerous high-voltage electric power compo-nents are located inside the TV. To avoid electric shock, do not disassemble the casing. Do not place or drop metals, small...
Page 13 - Installation
12 Installation To avoid damage to power circuits, do not place the TV in locations where there is excessive steam or dust. Do not place the TV on a bed, sofa, carpet, or in a sealed cabinet to avoid blocking the product's vents. Install the outdoor antenna far from power trans-mission lines to avoi...
Page 15 - FCC Compliance Statement; Regulatory Information
14 FCC Compliance Statement 1 This device complies with part 15 of the FCC Rules. Operation is sub- ject to the following two conditions: (1) This device may not cause harm- ful interference, and (2) this device must accept any interference received, including interference that may cause undesired o...
Page 16 - DOC Compliance Notice; Regulations of the Canadian Department of Communications.This; CE Conformity Statement
15 DOC Compliance Notice 1 This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications.This device complies with Canada ICES-003 Class B. CE Conformity Stateme...
Page 17 - Features; Introducing the TV
16 Thank you for purchasing this 15-inch Liquid Crystal Display TV. Your LCD TV is designed to be safe, versatile, and easy to use. The fun design makes it a fun addition to any room. You can watch broadcast or cable televi- sion channels, and easily connect a VCR, VCD or DVD player or a game device...
Page 18 - vendor immediately if anything is missing or damaged; TV; Checking Package Contents
17 Make sure the following components are included in the box. Contact your vendor immediately if anything is missing or damaged . TV Us e r ’s M a n u al Q u i c k Sta r t G u i d e Wa r r a n t y an d S e r v i c e M an u a l Wire Material Package V G A C a b l e P o w e r C o rd P o w er A d a p ...
Page 19 - Front View; D e s cr i p t i o n; Getting to Know Your TV
18 Front View D e s cr i p t i o n F u n c t i o n 1 Power Turns the TV on and off. 2 Select channel Changes channels.Press CH > to increase the channel number.Press CH< to decrease the channel number . In PC or AVmode,press either button to return to TV mode. 3 Adjust volume Press VOL > to...
Page 20 - Input and Output Por ts
19 Input and Output Por ts D e s cr i p t i o n F u n c t i o n 1 DC IN Connects to the included power adapter. 2 VGA Connects to a PC. 3 LINE IN Connects to a PC's DVI port. 4 LINE OUT Connects to external stereo speakers. 5 AV2 Use the included 4-IN-1 Audio/Video cable to connect exter-nal devices...
Page 21 - Connecting to an Antenna or Cable TV; Connect one end of the UHF or CATV cable to ANT Jack (VHF/UHF; ANT jack; Getting Started
20 Connecting to an Antenna or Cable TV 1 Connect one end of the UHF or CATV cable to ANT Jack (VHF/UHF IN Jack) on the back of the TV. 2 Connect the other end of the VHF/UHF (Antenna) or CATV cable to the antenna socket or CATV cable. NoteIf you cannot receive channels after connecting to an antenn...
Page 22 - Connecting to AV Devices; Connect external devices such as a VCR, VCD or DVD player, or video
21 Connecting to AV Devices Connect external devices such as a VCR, VCD or DVD player, or video game to the TV using the 4-IN-1 cable. Connecting to a VCR/VCD/DVD Player The illustration presented here shows how to connect the TV to a VCR, VCD or DVD player. Actual connections may vary according to ...
Page 23 - Connecting to a Video Camera; Note; AV connectors
22 Connecting to a Video Camera The instructions presented here are a general guide to connecting the TV to a camcorder or other type of digital camera. Actual connections may vary according to the make and model of the device. Refer to the user’s manual included with the camcorder or camera for mor...
Page 24 - Connecting to a Game Device; to; VIDEO; AV
23 Connecting to a Game Device The instructions presented here are a general guide to connecting the TV to a game device using the RCA Jacks provided (some game devices may require a unique adapter that is not provided). Actual connections may vary according to the make and model of the game device....
Page 25 - Connecting Exter nal Speakers or Headphones; to the speaker line out port as illustrated.
24 Connecting Exter nal Speakers or Headphones External speakers or headphones may be used to listen to the TV rather than using the built-in speakers. Connect external speakers or headphones to the speaker line out port as illustrated. Notes • External speakers or headphones are not included with t...
Page 26 - Connecting to a PC; Refer to the following illustration.; VGA port
25 Connecting to a PC You can connect the TV to a PC and use it as an external monitor. Connect the TV’s VGA port to the PC’s VGA port. Connect the TV’s line in port to the PC’s line out port to listen to the PC’s audio output on the TV’s speakers. Refer to the following illustration. NoteYou can co...
Page 27 - Connecting the Power Adapter; Connect the power cord to the power adapter as illustrated.; Power cord
26 Connecting the Power Adapter 1 Connect the power cord to the power adapter as illustrated. 2 Plug the power adapter connector into the DC-IN input jack on the rear panel of the TV. 3 Insert the three-pronged plug at the other end of the power cord into a power outlet. DC-IN input jack DC-IN VGA L...
Page 28 - Using the Remote Control; Using the TV
27 Using the Remote Control For best results, use the remote control within a distance of 5 meters from the front of the TV’s signal sensor. Do not exceed an angle of 30 degrees when pointing at the signal sensor. Refer to the following illustration. 3m 30 5m 3m 30 30 30 10 Using the TV
Page 29 - Tur ning the TV On and Off; POWER; Selecting Channels; CH UP; Power LED
28 Tur ning the TV On and Off 1 Press the POWER button on the remote control (or control panel). The power LED on the front of the TV changes from red to green, indicating that the power has been turned on. 2 Press the POWER button again; in AV mode, the power LED changes from green to red, indi- ca...
Page 30 - Switching Source Signals; SOURCE; Adjusting the Volume; VOL UP
29 Switching Source Signals Press SOURCE to select the incoming source signal. The current source setting (TV/CATV, AV1, AV2 or PC) appears on the upper left corner of the screen. Note The TV supports S-Video input in addition to normal video and audio signals. The TV detects the signal type automat...
Page 31 - B u t t o n D e s c r i p t i o n s; OSD Setting Menu; Press the; Settings; or the CH DOWN button
30 The On-Screen Display (OSD) menu system provides a quick and simple method to adjust your TV’s settings. This chapter describes how to change each of the available settings. The OSD can be used with either the remote control or the control panel . Note:The following sections explain how to adjust...
Page 33 - Contrast
32 Contrast 1 Press MENU to enter the OSD menus. 2 Press the CH UP button or CH DOWN button to select Brightness & Contrast. 3 Press MENU to enter the Bright- ness & Contrast menu. 4 Press MENU to select Contrast. 5 Press the CH UP button to increase the contrast. Press the CH DOWN button to...
Page 34 - MENU; Audio Setting
33 Audio Setting Press the MENU button to enter the OSD menus. 1 Press the CH UP button or CH DOWN button to select Audio Setting. 2 Press MENU to enter the Audio Setting menu. CH MENU V V PC Audio Setting Return Select Menu OK L R TrebleBass BalanceSRS ON OFF ON OFF Mute
Page 35 - Treble
34 Treble 1 Press MENU to enter the OSD menus. 2 Press the CH UP button or CH DOWN button to select Audio Setting. 3 Press MENU to enter the Audio Setting menu. 4 Press the CH UP button to increase the treble. Press the CH DOWN but- ton to decrease the treble. 5 Press MENU to select Return. 6 Press ...
Page 36 - Bass
35 Bass 1 Press MENU to enter the OSD menus. 2 Press the CH UP button or CH DOWN button to select Audio Setting. 3 Press MENU to enter the Audio Setting menu. 4 Press MENU to select Bass. 5 Press the CH UP button to increase the bass. Press the CH DOWN but- ton to decrease the bass. 6 Press MENU to ...
Page 37 - Balance
36 Balance 1 Press MENU to enter the OSD menus. 2 Press the CH UP button or CH DOWN button to select Audio Setting. 3 Press MENU to enter the Audio Setting menu. 4 Press MENU to select Balance. 5 Press the CH UP button to change the balance to the right speaker. Press the CH DOWN button to change th...
Page 38 - SRS
37 SRS This option enables the 3D Surround Sound feature . 1 Press MENU to enter the OSD menus. 2 Press the CH UP button or CH DOWN button to select Audio Setting. 3 Press MENU to enter the Audio Setting menu. 4 Press MENU to select SRS. 5 Press the CH DOWN button to turn the SRS on. Press the CH UP...
Page 39 - Mute
38 Mute 1 Press MENU to enter the OSD menus. 2 Press the CH UP button or CH DOWN button to select Audio Setting. 3 Press MENU to enter the Audio Setting menu. 4 Press MENU to select Mute. 5 Press the CH DOWN button to turn the mute on. Press the CH UP but- ton to turn the mute off. 6 Press MENU to s...
Page 40 - Video Setting
39 Video Setting Press the MENU button to enter the OSD menus. 1 Press the CH UP button or CH DOWN button to select Video Setting. 2 Press MENU to enter the Video Setting menu. CH MENU V V PC Video Setting Return Select Menu OK G R HueSaturation SharpnessColor Temp Standard
Page 41 - Hue
40 Hue 1 Press MENU to enter the OSD menus. 2 Press the CH UP button or CH DOWN button to select Video Setting. 3 Press MENU to enter the Video Setting menu. 4 Press the CH DOWN button to increase the red hue. The image becomes more red. Press the CH UP button to increase the green hue. The image be...
Page 42 - Saturation
41 Saturation 1 Press MENU to enter the OSD menus. 2 Press the CH UP button or CH DOWN button to select Video Setting. 3 Press MENU to enter the Video Setting menu. 4 Press MENU to select Saturation. 5 Press the CH UP button to increase the saturation. The screen image becomes more vibrant. Press th...
Page 43 - Sharpness
42 Sharpness 1 Press MENU to enter the OSD menus. 2 Press the CH UP button or CH DOWN button to select Video Setting. 3 Press MENU to enter the Video Setting menu. 4 Press MENU to select Sharpness. 5 Press the CH UP button to increase the sharpness. Press the CH DOWN button to decrease the sharpness...
Page 44 - Color Temperature
43 Color Temperature 1 Press MENU to enter the OSD menus. 2 Press the CH UP button or CH DOWN button to select Video Setting. 3 Press MENU to enter the Video Setting menu. 4 Press MENU to select Color Temp. The following choices are available. Warm Press the CH UP button or CH DOWN button to select ...
Page 45 - TV Setting
44 TV Setting Press the MENU button to enter OSD menus. 1 Press the CH UP button or CH DOWN button to select TV Setting. 2 Press MENU to enter the TV Setting menu. CH MENU V V PC TV Setting Return Select Menu OK TV/CATVMTS Auto ProgramManual Program CATV STDDUALYES NO
Page 47 - MTS
46 MTS 1 Press MENU to enter the OSD menus. 2 Press the CH UP button or CH DOWN button to select TV Setting. 3 Press MENU to enter the TV Set- ting menu. 4 Press MENU to select MTS. The following choices are available. MAIN Press the CH UP button or CH DOWN button to select Main (default), the defau...
Page 49 - Auto Program
48 Auto Program 1 Press MENU to enter the OSD menus. 2 Press the CH UP button or CH DOWN button to select TV Setting. 3 Press MENU to enter the TV Set- ting menu. 4 Press MENU to select Auto Pro- gram. 5 Press the CH DOWN button to select Yes. Channel indicator values scans from 2 to 69 (antenna con...
Page 50 - Manual Program 2
49 Manual Program This function allows you to search preset channels and erase channels. 1 Press MENU to enter the OSD menus. 2 Press the CH UP button or CH DOWN button to select TV Setting. 3 Press MENU to enter the TV Set- ting menu. 4 Press MENU to select M anual Pro- gram. 5 Press the CH UP butt...
Page 51 - lowing
50 Channel Add/Erase After you have found a channel using Manual Program, follow the fol lowing instruction to add or erase the channel . 1 Press MENU to select Add/Erase. 2 Select one of the following options. Add Channel Press the CH DOWN button to select Add. The channel is added to the channel l...
Page 52 - PC Setting
51 PC Setting Press the MENU button to enter the OSD menus. 1 Connect product to a PC. 2 Press SOURCE to select PC. 3 Press the CH UP or CH DOWN button to select PC. 4 Press MENU to enter the PC menu. CH MENU V V PC PC Setting Return Select Menu OK H.PositionV.Position PhaseClockMore Option 5016 0 1...
Page 53 - Horizontal Position
52 Horizontal Position 1 Press MENU to enter the OSD menus. 2 Press the CH UP button or CH DOWN button to select PC Setting. 3 Press MENU to enter the PC Set- ting menu. 4 Press the CH UP button to move the display to the right. Press the CH DOWN button to move the display to the left. 5 Press MENU ...
Page 54 - Vertical Position
53 Vertical Position 1 Press MENU to enter the OSD menus. 2 Press the CH UP button or CH DOWN button to select PC Setting. 3 Press MENU to enter the PC Set- ting menu. 4 Press MENU to select V.Position. 5 Press the CH UP button to move the display up. Press the CH DOWN but- ton to move the display d...
Page 55 - Phase
54 Phase 1 Press MENU to enter the OSD menus. 2 Press the CH UP button or CH DOWN button to select PC Setting. 3 Press MENU to enter the PC Set- ting menu. 4 Press MENU to select Phase. 5 Press the CH UP button to increase the phase. Press the CH DOWN but- ton to decrease the phase. 6 Press MENU to ...
Page 56 - Clock
55 Clock 1 Press MENU to enter the OSD menus. 2 Press the CH UP button or CH DOWN button to select PC Setting. 3 Press MENU to enter the PC Set- ting menu. 4 Press MENU to select Clock. 5 Press the CH UP button to increase the clock. Press the CH DOWN but- ton to decrease the clock. 6 Press MENU to ...
Page 57 - More Option
56 Color Temperature 1 Press MENU to enter the OSD menus. 2 Press the CH UP button or CH DOWN button to select PC Setting. 3 Press MENU to enter the PC Set- ting menu. 4 Press MENU to select the More option. 5 Press the CH UP button to enter the Color Temp menu. 6 Press MENU to select Color Temp. Wa...
Page 59 - Miscellaneous Setting; Miscellaneous
58 Miscellaneous Setting Press the MENU button to enter the OSD menus. 1 Press the CH UP button or CH DOWN button to select Miscellaneous. 2 Press MENU to enter the Mis- cellaneous menu. CH MENU V V PC Return Select Menu OK LanguageSleeper OSD DisplayTime SettingMore Option OFF English ON OFF Miscel...
Page 60 - Language
59 Language 1 Press MENU to enter the OSD menus. 2 Press the CH UP button or CH DOWN button to select Miscellaneous. 3 Press MENU to enter the Miscella- neous menu. 4 Press the CH UP button or CH DOWN button to select Chinese or English. 5 Press MENU to select Return. 6 Press the CH DOWN button to e...
Page 61 - Sleeper
60 Sleeper The Sleeper turns the TV off automatically after a set period of time . 1 Press MENU to enter the OSD menus. 2 Press the CH UP button or CH DOWN button to select Miscellaneous. 3 Press MENU to enter the Miscella- neous menu. 4 Press MENU to select Sleeper. 5 Press the CH UP button or CH D...
Page 62 - OSD Display
61 OSD Display When set to Off, the OSD display (source data on top left corner of the TV screen) turns off after approximately 5 seconds. When set to On, the OSD does not turn off automatically . 1 Press MENU to enter the OSD menus. 2 Press the CH UP button or CH DOWN button to select Miscellaneous...
Page 63 - Time Setting
62 Time Setting This setting allows you to set the TV clock . 1 Press MENU to enter the OSD menus. 2 Press the CH UP button or CH DOWN button to select Miscellaneous. 3 Press MENU to enter the Miscella- neous menu. 4 Press MENU to select Time Setting. 5 Press the CH UP button to enter the Time Setti...
Page 64 - OSD Background
63 OSD Background This setting allows you to make the OSD background transparent or opaque . 1 Press MENU to enter the OSD menus. 2 Press the CH UP button or CH DOWN button to select Miscellaneous. 3 Press MENU to enter the Miscella- neous menu. 4 Press MENU to select More Options. 5 Press the CH UP...
Page 65 - Reset
64 Reset The Reset function returns all of your TV’s user settings to their factory defaults. Warning: The reset function will erase all of your custom and favorite channel settings, and will reset all display settings (such as contrast, bright-ness, etc.) to the factory default values. The reset fu...
Page 67 - Taking Care of Your TV
66 Turn the power off before you begin cleaning the TV. For best results, use a clean lens cloth to remove dust and fingerprints from the screen. Do not wipe the shell of the TV with alcohol, methanol, gasoline or oil products to avoid dam-aging the finish. Wipe the shell with a dry soft cloth and u...
Page 68 - Troubleshooting
67 S i t u a t i o n S o l u t i o n No picture and sound. • Connect the power cord properly. • Press the POWER button on the control panel or remote control. • Press the SOURCE button to cycle through connected video sources. • Press CH UP or CH DOWN to switch to other TV stations. • Check the TV/C...
Page 70 - Specifications; PC Mode Support Timing
69 LT 0 B - 1 5 A 1 LCD Panel Size 15-inch TFT Aspect Ratio 4:3 Best Resolution 1024 (horizontal) x 768 (vertical) Maximum Display Area 304.1 mm (H) x 228.1 mm (W) TV System NTSC Video System VGA input (15 pin D-SUB), S-Video Input and Compos- ite Video Input (through the 4-IN-1 cable) Audio System ...
Page 71 - Glossary
70 Aspect Ratio The ratio of width to height of a film, image or display screen. Broadcast TV Broadcasting video signals using high-frequency electromagnetic waves to distribute television channels to viewers (standard TV broadcast). CATV Community Antenna Television, the original name for cable TV....
