Page 2 - Table of Contents
Table of Contents 1 1 . W a r r a n t y a n d S e r v i c e . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 . P r e f a c e . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
Page 4 - Warranty and Service
3 The instructions in this manual are for the models listed under the “Model-specific Specifications” on page 58 and 59. Before reading this manual, check the product number on the rear of your TV. Thank you for purchasing our Liquid Crystal Display Television (LCD TV). With this product, you will b...
Page 5 - information in this document is subject to change without notice.; Copyright; use, copying, and distribution. No part of this documentation may be; Preface
4 This manual is designed to assist users in setting up and using the LCD TV. Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. Copyright © Cop...
Page 6 - Electric Power Notice; Warning; Description of Warning Symbols
5 Electric Power Notice Electric power may cause personal injury and mechanical damage if it is misused. Although safety has been taken into consideration during the design and production of this product, electric shock or fire can result when the product is misused. To prevent potential danger, fol...
Page 7 - Antenna; Safety Notices
6 Power Supply Safety Notes 1. To avoid electric shocks, do not use an extended power cord or an outlet that does not match this product's plug or leaves the plug exposed. 2. This product has a 3-pin grounded plug. The third pin connects to ground; do not remove it. 3. If the power cord or plug is d...
Page 9 - Optimal Viewing Distance
Page 10 - Important Safety Instructions
9 Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer ’s ...
Page 12 - Personal Safety
11 Personal Safety To avoid overloading the power supply, do not plug too many electrical devices into an outlet or extension cable. Dangerous high-voltage electric power compo-nents are located inside the TV. To avoid electric shock, do not disassemble the casing. Do not place or drop metals, small...
Page 13 - Installation
12 Installation To avoid damage to power circuits, do not place the TV in locations where there is excessive steam or dust. Do not place the TV on a bed, sofa, carpet, or in a sealed cabinet to avoid blocking the product's vents. Install the outdoor antenna far from power trans-mission lines to avoi...
Page 15 - FCC Compliance Statement; Regulatory Information
14 FCC Compliance Statement 1 This device complies with part 15 of the FCC Rules. Operation is sub- ject to the following two conditions: (1) This device may not cause harm- ful interference, and (2) this device must accept any interference received, including interference that may cause undesired o...
Page 16 - DOC Compliance Notice; Regulations of the Canadian Department of Communications.This; CE Conformity Statement
15 DOC Compliance Notice 1 This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications.This device complies with Canada ICES-003 Class B. CE Conformity Stateme...
Page 17 - Features; Introducing the TV
16 Thank you for purchasing this Liquid Crystal Display TV. Your LCD TV is designed to be safe, versatile, and easy to use. The design of the product is based on cute animals, such as the elephant shown here, which makes it a fun addition to any room. You can watch broadcast or cable television chan...
Page 18 - your vendor immediately if anything is missing or damaged.; TV; Checking Package Contents
17 Make sure the following components are included in the box. Contact your vendor immediately if anything is missing or damaged. TV Us e r ’s M a n u a l Q u i c k Sta r t G u i d e Wa r r an t y a n d S e r v i c e M a n u al Wire Material Package P o w er C o r d P o w e r A d a p t e r 4- I N - ...
Page 19 - Front View; De s c r i p t i o n; CH; Getting to Know Your TV
18 Front View De s c r i p t i o n F u n c t i o n 1 Menu Turns the On-Screen Display (OSD) menus on and off. 2 Select channel Changes channels. Press CH S to increase the channel number. Press CH T to decrease the channel number. 3 Adjust volume Press VOL + to increase the volume. Press VOL – to de...
Page 20 - Input and Output Por ts; D e s cr i p t i o n
19 Input and Output Por ts D e s cr i p t i o n F u n c t i o n 1 DC 12V Connects to the included power adapter. 2 4-IN-1 Connects to a VCR/VCD/DVD player, CVBS RCA cables, or a game device. 3 HEADPHONE Connects to headphones or other audio device. 4 ANT Connects to an antenna or CATV cable televisi...
Page 21 - Connecting to an Antenna or Cable TV; Connect one end of the UHF or CATV cable to the ANT Jack; ANT jack; Getting Started
20 Connecting to an Antenna or Cable TV 1 Connect one end of the UHF or CATV cable to the ANT Jack (VHF/UHF IN Jack) on the back of the TV. 2 Connect the other end of the VHF/UHF (Antenna) or CATV cable to the antenna socket or CATV cable. Note If you cannot receive channels after connecting to an a...
Page 22 - B R W Y
21 Connecting to AV Devices Connect external devices such as a VCR, VCD or DVD player, or video game to the TV using the 4-IN-1 cable. Connecting to a VCR/VCD/DVD Player The illustration presented here shows how to connect the TV to a VCR, VCD, or DVD player. Actual connections may vary according to...
Page 23 - Connecting to a Video Camera; the TV to a camcorder or other type of digital camera. Actual connec-; AV connectors
22 Connecting to a Video Camera The instructions presented here are a general guide to connecting the TV to a camcorder or other type of digital camera. Actual connec- tions may vary according to the make and model of the device. Refer to the user’s manual included with the camcorder or camera for m...
Page 24 - Connecting to a Game Device; the TV to a game device using the RCA Jacks provided (some game; Notes; AV
23 Connecting to a Game Device The instructions presented here are a general guide to connecting the TV to a game device using the RCA Jacks provided (some game devices may require a unique adapter that is not provided). Actual connections may vary according to the make and model of the game device....
Page 25 - Headphones
24 Connecting Exter nal Speakers or Headphones External speakers or headphones may be used to listen to the TV rather than using the built-in speakers. Connect external speakers or headphones to the headphone line out port as illustrated. Notes • External speakers or headphones are not included with...
Page 26 - Connecting the Power Adapter; Connect the power cord to the power adapter as illustrated.; Power cord
25 Connecting the Power Adapter 1 Connect the power cord to the power adapter as illustrated. 2 Plug the power adapter connector into the DC-IN input jack on the rear panel of the TV. 3 Insert the three-pronged plug at the other end of the power cord into a power outlet. DC-IN input jack DC 12V HEAD...
Page 27 - Using the TV
26 Using the Remote Control For best results, use the remote control within a distance of 5 meters from the front of the TV’s signal sensor. Do not exceed an angle of 30 degrees when pointing at the signal sensor. Refer to the following illustration. 30 30 5m 3m 3m 10 Using the TV
Page 28 - Tur ning the TV On and Off; POWER; Selecting Channels; CH UP; Power
27 Tur ning the TV On and Off 1 Press the POWER button on the control panel (or remote control). The power LED changes from dark to green, indicating that the power has been turned on. 2 Press the POWER button again; the power LED changes from green to dark, indicating that the TV is in off mode. Se...
Page 30 - button to select Exit; C o n t r o l P an e l; OSD Setting Menu; Press the; Settings
29 The On-Screen Display (OSD) menu system provides a quick and simple method to adjust your TV’s settings. This chapter describes how to change each of the available settings.The OSD can be used with either the remote control or the front con-trol panel. The following sections explain how to adjust...
Page 31 - Brightness; MAX
30 Brightness 1 Press MENU to enter the OSD menus. 2 Press the CH UP button or CH DOWN button to select Brightness. 3 Press MENU . The brightness slide bar appears. 4 Press the CH UP button to increase the brightness. 5 Press the CH DOWN button to decrease the brightness. 6 Press MENU to confirm the...
Page 32 - Contrast
31 Contrast 1 Press MENU to enter the OSD menus. 2 Press the CH UP button or CH DOWN button to select Contrast. 3 Press MENU . The contrast slide bar appears. 4 Press the CH UP button to increase the contrast. 5 Press the CH DOWN button to decrease the contrast. 6 Press MENU to confirm the setting a...
Page 33 - Video Setting; MENU
32 Video Setting Press the MENU button to enter the OSD menus. 1 Press the CH UP button or CH DOWN button to select Video Setting. 2 Press MENU to enter the Video Setting menu. CH CH VOL VOL menu ETO ETO M a i n M e n u V i d e o S e t t i n g E N T E R
Page 34 - Hue
33 Hue 1 Press the CH UP button or CH DOWN button to select Hue. 2 Press MENU to enter the Hue menu. 3 Press the CH UP button to increase the hue towards the red spectrum. The image becomes more red. 4 Press the CH DOWN button to decrease the hue towards the green spectrum. The image becomes more gr...
Page 35 - Saturation
34 Saturation 1 Press the CH UP button or CH DOWN button to select Saturation. 2 Press MENU to enter the Saturation menu. 3 Press the CH UP button to increase the saturation. The screen image becomes more vibrant. 4 Press the CH DOWN button to decrease the saturation. The screen image becomes less v...
Page 36 - Sharpness
35 Sharpness 1 Press the CH UP button or CH DOWN button to select Sharpness. 2 Press MENU to enter the Sharpness menu. 3 Press the CH UP button to increase the sharpness. 4 Press the CH DOWN button to decrease the sharpness. 5 Press MENU again to confirm the setting and return to the Video Setting m...
Page 37 - Color Temperature; Standard Color
36 Color Temperature 1 Press the CH UP button or CH DOWN button to select Color. 2 Press MENU to enter the Color menu. The following three color temperatures are available. Standard Color Press the CH UP button or CH DOWN button to select Standard, then press MENU . Warm Color Press the CH UP button...
Page 38 - Audio Setting
37 Audio Setting Press the MENU button to enter the OSD menus. 1 Press the CH UP button or CH DOWN button to select Audio Setting. 2 Press MENU to enter the Audio Setting menu. CH CH VOL VOL menu ETO ETO M a i n m e n u A u d i o S e t t i n g E N T E R
Page 39 - Treble
38 Treble 1 Press the CH UP button or CH DOWN button to select Treble. 2 Press MENU to enter the Treble menu. 3 Press the CH UP button to increase the treble. 4 Press the CH DOWN button to decrease the treble. 5 Press MENU to confirm the setting and return to the Audio Setting menu. E N T E R A u d ...
Page 40 - Bass
39 Bass 1 Press the CH UP button or CH DOWN button to select Bass. 2 Press MENU to enter the Bass menu. 3 Press the CH UP button to increase the bass. 4 Press the CH DOWN button to decrease the bass. 5 Press MENU to confirm the setting and return to the Audio Setting menu. E N T E R A u d i o S e t ...
Page 41 - Balance
40 Balance 1 Press the CH UP button or CH DOWN button to select Balance. 2 Press MENU to enter the Balance menu. 3 Press the CH DOWN button to shift the balance to the left speaker. 4 Press the CH UP button to shift the balance to the right speaker. 5 Press MENU to confirm the setting and return to ...
Page 42 - TV Setting
41 TV Setting Press the MENU button to enter the OSD menus. 1 Press the CH UP button or CH DOWN button to select TV Setting. 2 Press MENU to enter the TV Setting menu. CH CH VOL VOL menu ETO ETO M a i n M e n u T V S e t t i n g E N T E R
Page 44 - MTS; MAIN
43 MTS 1 Press the CH UP button or CH DOWN button to select MTS. 2 Press MENU to enter the MTS menu. MAIN 1 Press the CH UP button or CH DOWN button to select MAIN (default). MAIN is highlighted in red. 2 Press MENU again to confirm the selection. SAP 1 Press the CH UP button or CH DOWN button to se...
Page 45 - Auto Program
44 Auto Program 1 Press the CH UP button or CH DOWN button to select Auto Program. 2 Press MENU to enter the Auto Program menu. 3 Press the CH UP button or CH DOWN button to select Yes or No. 4 Press MENU . The screen goes blank and the chan-nel indicator values range from 2 to 69 (antenna connectio...
Page 46 - Manual Program; from preset channels.
45 Manual Program This function allows you to locate channels for adding to or erasing from preset channels. 1 Press the CH UP button or CH DOWN button to select Manual Pro- gram. 2 Press MENU to enter the Manual Program menu. 3 Press the CH UP button or CH DOWN button to find the channel you want t...
Page 47 - Erase Channel; the; Channel to be added or erased must be selected from Manual Pro-
46 Channel Add/Erase 1 Press the CH UP button or CH DOWN button to select CH. Add/Erase. 2 Press MENU to enter the CH. Add/Erase menu. Select one of the following options. Add Channel1 Press the CH UP button to select Add. 2 Press MENU to add the selected channel. Erase Channel 1 Press the CH DOWN b...
Page 48 - Miscellaneous Setting
47 Miscellaneous Setting Press the MENU button to enter the OSD menus. 1 Press the CH UP button or CH DOWN button to select Miscellaneous. 2 Press MENU to enter the Mis- cellaneous menu. CH CH VOL VOL menu ETO M a i n M e n u M i s c e l l a n e o u s E N T E R
Page 49 - OSD Position; The following options are available.; Horizontal Position
48 OSD Position 1 Press the CH UP button or CH DOWN button to select OSD Position. 2 Press MENU to enter the OSD Position menu. The following options are available. Horizontal Position 1 Press the CH UP button or CH DOWN button to select H. Position. 2 Press MENU . 3 Press the CH DOWN button to move...
Page 50 - Language; The default language setting is Traditional
49 Language 1 Press the CH UP button or CH DOWN button to select Language. 2 Press MENU to enter the Language menu. The screen displays the available OSD languages: English and T-Chinese (Traditional Chinese). 3 Press the CH UP button or CH DOWN button to select a language. 4 Press MENU to confirm y...
Page 51 - Sleep Timer; – Off
50 Sleep Timer The sleep timer turns the TV off automatically after a set period of time. 1 Press the CH UP button or CH DOWN button to select Sleep. 2 Press MENU to enter the Sleep menu. 3 The screen displays the available sleep timer setting: – Off – 30 minutes – 60 minutes – 90 minutes – 120 minu...
Page 52 - OSD Display; This setting allows you to set whether information such as the; DISPLAY
51 OSD Display This setting allows you to set whether information such as the selected channel is shown on the TV screen when the DISPLAY button is pressed. 1 Press the CH UP button or CH DOWN button to select OSD Display. 2 Press MENU to enter the OSD Display menu. 3 Press the CH UP button or CH DO...
Page 53 - Reset
52 Reset The Reset function returns all of your TV’s user settings to their fac- tory defaults. Warning: The reset function will erase all of your custom and favorite channel settings, and will reset all display settings (such as contrast, brightness, etc.) to the factory default values. The reset f...
Page 54 - Care and Maintenance of the TV; Taking Care of Your TV
53 Care and Maintenance of the TV Turn the power off before you begin cleaning the TV. For best results, use a clean lens cloth to remove dust and fingerprints from the screen. Do not wipe the shell of the TV with alcohol, methanol, gasoline or oil products to avoid damaging the finish. Wipe the she...
Page 55 - Care and Maintenance of the Animal Cover
54 Care and Maintenance of the Animal Cover • The plush cover may be patted down by hand to remove dust. Do not dry clean or wash the plush cover by yourself. • Do not unzip the plush cover. The plush cover may only be removed by the manufacturer to service the product. • To avoid deformation of the...
Page 56 - Troubleshooting
55 S i t u a t i o n S o l u t i o n No picture and sound. • Connect the power cord properly. • Press the POWER button on the control panel or remote control. • Press the SOURCE button to cycle through connected video sources. • Press the CH UP button or CH DOWN button to switch to other TV stations...
Page 58 - Standard Specifications for all Models; Specifications
57 Standard Specifications for all Models K2 06 -1 0A1 LCD Panel Size 9.6-inch TFT Aspect Ratio 4:3 Best Resolution 800 (horizontal) x 600 (vertical) Maximum Display Area 194.4 mm (H) x 145.8 mm (W) TV System NTSC Video System S-Video Input and Composite Video Input (through the 4-IN-1 Cable) Audio ...
Page 59 - Model-specific Specifications; P r o d u c t
58 Model-specific Specifications P r o d u c t N u m b e r We i g h t ( i nc l u di n g b a s e ) Dimensions (including base) K206-10A1-002 3 kg 435 x 492 x 224 K206-10A1-003 3 kg 520 x 321 x 224 K206-10A1-004 3 kg 544 x 300 x 224 K206-10A1-005 3 kg 508 x 380 x 224 K206-10A1-006 3 kg 488 x 300 x 224...
Page 61 - Glossary
60 Aspect Ratio The ratio of width to height of a film, image or display screen. Broadcast TV Broadcasting video signals using high-frequency electromagnetic waves to distribute television channels to viewers (standard TV broadcast). CATV Community Antenna Television, the original name for cable TV....
Page 62 - VCD
61 S-Video Super-video, a video cabling standard used to transmit video by keeping brightness (Y) and color information (C) on separate channels. Most often used with camcorders, VCRs, and quality receivers and amplifiers to provide sharper pic-tures. VCD A compact disk format developed in 1993 by S...
