HANNspree JT02 - Manual

7

9

8

1

6

5

4

3

2

OSD

M a n u a l S t o r e

N a m e

S e l e c t

E x i t

C h a n n e l

MENU

A u t o S c a n

U K

AV

PC

SCART1

SVIDEO

YPbPr

SCART2

TV

SCART2-SV

HDMI2

HDMI1

JT02 37" Liquid Crystal Display TV

Front View

Front View

JT2002310681P

This guide is designed as a reference to help you start using your LCD TV quickly. Please refer to the User's Manual for more detailed installation and safety instructions.

© Copyright 2007 Hannspree, Inc. All rights reserved.

6. Enter button
7. Power button
8. Infrared receiver
9. Power LED indicator

1. Connect one end of the UHF/VHF (Antenna)

or CATV cable to the TV IN jack (UHF/VHF
IN jack) on the back of the TV.

2. Connect the other end of the UHF/VHF

(Antenna) or the CATV cable to the Antenna
or CATV socket.

The illustrations below show you how to connect your TV to a VCR, VCD or a DVD player.

Making Connections

Connecting the Power Cord

1. Plug the power connector into the

AC-IN input jack on the rear cover of
the TV-set.

2. Insert the three-pronged plug at the

other end of the power cord into a
power outlet.

3. Turn the main power switch on to

supply power to the TV.

With RCA AV cable

With S-Video cable

With YPbPr cable

With SCART1

1. Make sure your TV is turned on and a device
such as a DVD player is connected.

2. Press the

SOURCE

button on the remote

control and use the



/



button to select

the required input source between PC, HDMI1,
HDMI2, TV, YPbPr, AV, SVIDEO, SCART1,
SCART2, and SCART2-SV.
3. Press enter to confirm your selection.

Follow the instructions below to automatically preset the channels for your TV
before watching it for the first time.

1. Press the "

MENU

" button on your remote control or the control panel.

2. Use the



/



button to select Channel Menu.

3. Press the



/



button to select country.

4. Press the "

ENTER

" button to start Auto Scan.

Getting Started

Auto Channel Scan

Selecting Input Source

Rear View

Rear View

1. AC Power Switch
2. AC power input
3. HDMI-1 Input Terminal (19 pin)
4. HDMI-2 Input Terminal (19 pin)
5. VGA (15 pin) Signal Input from
Computer
6. YPbPr/ HD Component Video Input

7. S-Video Input

8. Composite Video input
9. SCART 1 Input
10. SCART2 / SCART2-SV Input
11. RF Antenna / Cable TV Input
12. Audio Input for VGA
13. Audio Input for AV, S-Video or YPbPr/
HDMI-DVI components (L/R)
14. Audio Output for AV, S-Video or YPbPr
components (L/R)

Note:

After performing Auto Scan, you need not do it again when turning

on your TV next time.

Auto Scan

Quick Start Guide

Connecting to Antenna/Cable TV

Connecting to VCR, VCD or DVD Player

1 2

3 4

5

6

7 8

9 10 11121314

1. Volume down button
2. Volume up button
3. OSD Menu button
4. Channel down button
5. Channel up button