Page 2 - Contents
Contents Safety precautions Installation and adjustment Preparation before washing The musts in washing Usage of the detergent Washing sequence Disposal after washing Packing list *Specification Names of the parts Trouble-Shooting *Answers to question
Page 3 - Meaning and description of the symbols; Warning sign; Names of the parts
1 Buzzer Water-filling entrance Water inlet selector handle Wash selector Wash timer Control panel Overflow filter Quick water-filling entrance Water level adjusting lever Lint filter( Installed by user) Valve cover Pulsator Wash tub Wash tub cover Drain hose Outer cover of the spin tub Inner cover ...
Page 4 - Safety precautions
2 Safety precautions Please insert the power cord into special receptacle with rated vol-tage.Be sure to use single-phase three pins receptacle.The earthing terminal of the receptacle must be earthed reliably.If possible,please adopt electric leakage protector. When the machine is normallyusing, ple...
Page 6 - Installation and adjustment; Install the lint filter; The drainage shall be smooth with the drain hose.; Do not tramp or press the drain hose.
Overflow filter Lint filter If the extra hose is too long, cut it eitherat point A or B. <10cm B A > 30mm <1.5m 4 Installation and adjustment Please install and adjust the machine according to the requirement ofthe manual. It is very important to your security and correct operating the mach...
Page 7 - How to change the direction of the drain hoses; Extend the drain hose from the side of spin tub; Extend the drain hose from the rear side; Install the water inlet hose Select the water level
5 How to change the direction of the drain hoses Figure 1 indicates the ex factory installationposition of the drain hose. Put soft items on the ground. Lean the machine down gently with the front surface facing the ground. Take off the drain hose from the cabinet.Take the hose out of the fixing gro...
Page 8 - Preparation before washing
6 Preparation before washing1.Connect the water inlet hose.2.Confirm that the washing machine is earthed reliably . Then insert the power plug into the receptacle. Do not connect the earth terminal to the gas pipe and tap water pipe.3.Put down the drain hose . 4.Slanting or uneven ground may result ...
Page 9 - The musts in washing; How to use the whitener; It is suggested not to use high sudsingdetergent.; How to use the washing powder; Usage of the detergent
7 The capacity of washing and spinning of the machine refer to the largest weight of thestandard laundries under dry condition that can be washed or spinned in one time. Laundriesquantity in one washing cycle shall be lowerthan the rated capacity. The thickness ,size , type of the cloth will influ-e...
Page 10 - Washing sequence; Figure 1; Wash; Figure 4
Figure 5 DRAIN STRONG SOFT WASH SELECTOR 8 OFF OFF OFF DRAIN STRONG SOFT MAX Washing sequence Figure 1 Figure 2 WOOL WOOL Spin timer SPIN TIMER SPIN WASH Wash timer WASH TIMER WASH SELECTOR Wash selector Buzzer BUZZER Water-filling entrance (To set to below 2 minute, first set to 5 minute then turn ...
Page 11 - Midway spinning
9 Midway spinning Push Push Proper Proper Outer cover of The spin tub Inner cover of The spin tub The laundries are slanting Gland No gland (1) Open the outer cover of the spin tub.(2) Set the water-filling selector control rod at the "SPIN" side. Fill water for about 1 minute. If the water ...
Page 12 - Rinsing; OVERFILL
10 Rinse with stored water Rinse with water-filing 1. Put the laundries into the wash tub. Select suitable current according to the laundries. 2. Fill water to preset water level. 3. Rinse Adjust the wash timer to 2-3 minutes to do rinsing. When the laundries quantity is below 2.4kg, please use "...
Page 13 - Spinning
11 1. Put the laundries into the spin tub evenly and smoothly. 2. Press the gland in the tub properly. Close the inner and outer cover of the spin tub. 3. Spin Select suitable spin time according to the laundries, and do spinning. During spinning, if there's abnormal sound, it is generally owing to ...
Page 14 - Cleaning the overflow filter; Cleaning the lint filter; Disposal after washing
12 After using, please clean the lint and foreign materials of the lint filter and overflow filter in time. Otherwise it may influence your using the machine.Please first pull off the power plug from the receptacle before cleaning. 1 Take off the overflow filter. As indicated in the figure, nip the ...
Page 16 - Trouble-shooting Answer to question; When the remained water is frozen
14 Trouble-shooting Answer to question When the remained water is frozen If the laundries fall to the outer side of the spin tub,please take them out immediately. 1.DismantleAs indicated in the figure, push the point marked with " " to pull the spin tub frame to oblique upwards to dismantle ...
Page 17 - Phenomena The reason; There may be some
15 Trouble-shooting Answer to question (If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or aft...
Page 18 - Packing list; Twin-tub washing machine; Specification
16 Water inlet hose Water-filling jointer Gland Lint filter Packing list Twin-tub washing machine Name Quantity User's manual One piece One piece One piece One piece One piece One set Water level/Water quantity (about) Maximum/43L Medium/36L Minimum/30L Injection pressure(MPa Specification