Page 3 - DIGITAL TELEVISION TRANSITION NOTICE
1 DIGITAL TELEVISION TRANSITION NOTICE This device contains a digital television tuner, so it should receive digital over the air TV programming, with a suitable antenna, after the end of full-power analog TV broadcasting in the United States on June 12 2009. Some older television receivers, if they...
Page 4 - Batteries installed warning
2 SYMBOL SYMBOL DEFINITION DANGEROUS VOLTAGE: The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electri...
Page 5 - NOTICE; comply with the emission limits.; FOR YOUR SAFETY
3 WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture NOTICE 1. The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 2. Shielded interface cables and A...
Page 6 - PRECAUTIONS AND REMINDERS; Place unit on even surfaces.; Notice for Remote Controller; Avoid Dropping
4 PRECAUTIONS AND REMINDERS Place unit on even surfaces. Unplug immediately if there is a malfunction like no picture, no video/audio, smoke and bad odor from TV. Don't throw any object inside the TV box like metals or other flammable materials. Don't place the TV in confined spaces or in a box when...
Page 7 - IMPORTANT SAFETY INSTRUCTIONS; Read before operating equipment; device shall remain readily operable.
5 IMPORTANT SAFETY INSTRUCTIONS Read before operating equipment 1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Do not use this apparatus near water.6. Clean only with a dry cloth.7. Do not block any ventilation openings. Install in accordance...
Page 8 - only as recommended by the manufacturer.
6 19. CONSUMER ALERT – This television receiver has only an analog broadcast tuner and will require a converter box after June 12 2009, to receive over-the-air broadcasts with an antenna because of the Nation's transition to digital broadcasting. Analog-only TVs should continue to work as before wit...
Page 10 - SAVE THESE INSTRUCTIONS; Model number
8 ENERGY STAR compliantBy being ENERGY STAR compliant you are assured that your Haier model is helping the environment by using less energy while saving you money. ENERGY STAR is a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy promoting energy efficiency...
Page 11 - TABLE OF CONTENTS
9 TABLE OF CONTENTS DIGITAL TELEVISION TRANSITION NOTICE ............................................................. 1 FOR YOUR SAFETY .............................................................................................................. 3 PRECAUTIONS AND REMINDERS ...........................
Page 12 - NOTE; PREPARATION
10 IMPORTANT: Do not apply pressure to the screen display area which may compromise the integrity of the display. The manufacturer’s warranty does not cover user abuse or improper installations. ATTACHING THE BASE IMPORTANT: The base of the HDTV must be assembled prior to usage.1. Place the TV unit ...
Page 13 - Power Key; TV on a solid surface.; Connect the antenna cable or
11 3. Remote control: Remove the cover of the battery compartment. Insert the 2 supplied batteries (Type AAA 1.5V). HT R- D1 1 HT R- D1 1 4. Power: Insert the power cord in the wall socket with AC power supply. 5. Turn the TV on: Press the Power key on the remote control or the front panel touch con...
Page 14 - PERIPHERAL CONNECTION GUIDE; Out) – When a digital audio signal
12 PERIPHERAL CONNECTION GUIDE • HDMI – Connect the primary source for digital video such as a DVD player, Blu-ray player, or set top box through this all digital connector. • VGA/AUDIO IN – Connect the video and audio cables from a computer here. • COMPONENT (Y/Pb/Pr with Audio L/R) – Connect the p...
Page 15 - OPERATING INSTRUCTIONS; TO USE THE FRONT PANEL CONTROLS; • Menu displayed: Navigate right or confirm/change a
13 OPERATING INSTRUCTIONS TO USE THE FRONT PANEL CONTROLS The front panel controls are touch keys. Simply touch the icon with your finger. • Power on/off (standby) the TV set. • Menu displayed: Navigate up.• Menu not displayed: Browse the TV channels. • Menu displayed: Navigate down.• Menu not displ...
Page 16 - TO USE THE REMOTE CONTROL
14 TO USE THE REMOTE CONTROL Power Press to power ON/OFF (standby) TV. Note: The TV is never completely powered off unless physically unplugged. TV, DVD, STB, CABLE, VCR, AUD Select one of the system modes in which the remote control can be used. PICTURE Press to change the picture mode: Standard, E...
Page 18 - TO USE THE MENUS; Press the Menu button to display; or close the main menu.; Use the Navigation Ring to move; TV MENU; intensity of the received DTV signal.; VIDEO MENU
16 TO USE THE MENUS 1. Press the Menu button to display or close the main menu. 2. Use the Navigation Ring to move around to select, adjust or confirm an item in the OSD (On Screen Display) menu. Press the Menu button to enter the main OSD. You can adjust the items in the Video, Audio, TV, Setup, an...
Page 19 - Preset: Restores all video settings; AUDIO MENU
17 Language or Audio Source item is unavailable in other source modes. ENTER Audio Audio Sound ModeBassTrebleBalanceAudio LanguageSPDIFSpeaker Multi Language Select Move Return Personal 6360 R5 English RAW On hello Video TV Setup VGA 1. Sound Mode: Choose the audio mode: Standard / Music / Speech / ...
Page 20 - Preset: Restores all audio settings; to the factory default value.; SETUP MENU
18 the TV speaker is off. The default setting is On. 9. AVL: Turn the Auto Volume Leveler On or Off. When AVL is on, the TV will maintain a steady volume during commercials or when the channel is changed. 10. Preset: Restores all audio settings to the factory default value. SETUP MENU The Feature me...
Page 24 - VGA MENU; the factory default value.; TIPS; can be recycled and reused.
22 (On) or disable (Off) the mute screen function. When enabled, the screen mute warning banner would be displayed on screen after 5 seconds if no key is pressed. Once the screen mute warning banner is displayed, click "Yes" to start muting screen or click "No" to disable mute screen...
Page 26 - PRODUCT SPECIFICATIONS; be added in the future.; DISPLAY; Viewable; CONNECTIONS; • VGA. Supported scan
24 PRODUCT SPECIFICATIONS NOTE • This model complies with the specifications listed below.• Designs and specifications are subject to change without notice.• This model may not be compatible with features and/or specifications that may be added in the future. Model No. LE32C13200 LE40C13800 DISPLAY ...
Page 28 - TROUBLESHOOTING; Symptoms
26 TROUBLESHOOTING Please make these simple checks before calling service. These tips may save you time and money since charges for receiver installation and adjustments of customer controls are not covered under your warranty. Symptoms Items to Check and Actions to follow “Ghost” or double image • ...
Page 29 - GLOSSARY
27 GLOSSARY HDTVHDTV displays are technically defined as being capable of displaying a minimum of 720p or 1080i active scan lines. HDMI InputsHigh-Definition Multimedia Interface Audio / Video InputsLocated on the rear of the receiver, these connectors (RCA phono type plug) are used for the input of...
Page 30 - WARRANTY
28 WARRANTY This Haier brand product, when shipped in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective product with a new or re-manufactured equivalent, for parts or labor for the ...
