Page 3 - DIGITAL TELEVISION TRANSITION NOTICE
1 DIGITAL TELEVISION TRANSITION NOTICE This device contains a digital television tuner, so it should receive digital over the air TV programming, with a suitable antenna, after the end of full-power analog TV broadcasting in the United States on June 12 2009. Some older television receivers, if they...
Page 4 - Batteries installed warning
2 SYMBOL SYMBOL DEFINITION SA 1965 DANGEROUS VOLTAGE: The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of...
Page 5 - SAFETY: Lamp Disposal; Hg; LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE; NOTICE; comply with the emission limits.; NOTE; receiver is connected.; FOR YOUR SAFETY
3 SAFETY: Lamp Disposal Hg LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. FOR MORE INFORMATION, CONTACT THE ELECTRONIC INDUSTRIES ALLIANCE AT WWW.EIAE.ORG. NOTICE 1. The changes or modifications not expressly approved by the...
Page 6 - PRECAUTIONS AND REMINDERS; Notice for Remote Controller
4 Place unit on even surfaces. Unplug immediately if is malfunction like no picture, no video/audio, smoke and bad odor from TV. Don't throw any object inside the TV box like metals or other flammable materials. Don't place the TV in confined spaces or in a box when using it. Unplug immediately if o...
Page 7 - IMPORTANT SAFETY INSTRUCTIONS; Read before operating equipment; manufacturers instructions.
5 IMPORTANT SAFETY INSTRUCTIONS Read before operating equipment 1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Do not use this apparatus near water.6. Clean only with a dry cloth.7. Do not block any of the ventilation openings. Install in acc...
Page 8 - only as recommended by the manufacturer.
6 19. Service Instructions – "CAUTION – These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so." 20. Wall Mount ...
Page 9 - socket outlet with a protective earthing connection.
7 ANTENNA ANTENNA DISCHARGE UNIT GROUNDING CONDUCTORS POWER SERVICE GROUNDING ELECTRODE SYSTEM GROUND CLAMPS ELECTRIC SERVICE EQUIPMENT GROUND CLAMP EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE Note to the CATV system installer: This reminder is provided to call the CATV system insta...
Page 10 - SAVE THESE INSTRUCTIONS; the label on back of the unit.
8 SAVE THESE INSTRUCTIONS Thank you for purchasing this Haier product. This easy-to-use manual will guide you in getting the best use of your product. Remember to record the model and serial number. They are on the label on back of the unit. Model number Serial number Date of purchase Staple your re...
Page 11 - TABLE OF CONTENT
9 TABLE OF CONTENT DIGITAL TELEVISION TRANSITION NOTICE ................................. 1 FOR YOUR SAFETY .................................................................................. 3 PRECAUTIONS AND REMINDERS ..................................................... 4 IMPORTANT SAFETY INSTRUCT...
Page 12 - ATTACHING THE BASE; The Base of the HDTV; PREPARATION
10 IMPORTANT: Do not apply pressure to the screen display area which may compromise the integrity of the display. The manufacturer’s warranty does not cover user abuse or improper installations. ATTACHING THE BASE IMPORTANT: The Base of the HDTV must be assembled prior to usage. L32C1120 1. Place TV...
Page 13 - The wall mount bracket and the; Connect the antenna cable or
11 NOTE The wall mount bracket and the screws are not included. Please make sure to connect the power plug to the wall outlet socket after connecting the TV to the power cord! (power cord) 1. Install the base stand; place the TV on a solid surface. Min 1 m Ensure that the TV is placed in a positio...
Page 14 - PERIPHERAL CONNECTION GUIDE
Page 16 - OPERATING INSTRUCTIONS; USING THE FRONT PANEL CONTROL
14 OPERATING INSTRUCTIONS USING THE FRONT PANEL CONTROL 1 2 3 56 4 7 INPUT MENU VOL+ VOL- CH+ CH- POWER 1 INPUT Press to select the input source. 2. MENU Press to open or exit the OSD (on-screen display) menu. 3. VOL + Press to increase the sound volume. 4. VOL - Press to decrease the sound volume. ...
Page 17 - Menu not displayed:; USING THE REMOTE CONTROL
15 Power Press to power ON/OFF (standby) TV. Note: TV is never completely power off unless physically unplugged. PICTURE Press to switch the picture mode. AUDIO Press to switch the audio mode. ARC Press to switch the display mode: Normal, Zoom1, Wide, Zoom2, or HDMI PC mode(Only for HDMI Video Sourc...
Page 18 - Press to display the previous channel.
16 RECALL Press to display the previous channel. DISPLAY Press to show the information about the input source, TV channel, display resolution and current time. GUIDE Press to display the Electronic Program Guide.FAVORITEPress "FAVORITE" to open the Favorite Channel List. CH.LIST Press to dis...
Page 19 - The Channel menu in TV mode shows as; VIDEO MENU
17 USING THE MENUS 1. Press the Menu button to display or close the main menu. 2. Use the Navigation Ring to move around to select, adjust or confirm an item in the OSD (On Screen Display) menu. Press the Menu button to enter the main OSD. You can adjust the options in Video menu , Audio menu , Feat...
Page 20 - AUDIO MENU
18 4. Sharpness: Video sharpness adjustment, the tuning range is 0 ~ 100. 5. Color: Video color adjustment, the tuning range is 0 ~ 100. 6. Tint: Video tint adjustment, the tuning range is R50 ~ G50. 7. Color Temp: Three color temperature modes. (Cool / Normal / Warm ) 8. Noise Reduction: Gives four...
Page 21 - FEATURE MENU
19 10. SRS: Turn this feature on to enhance the audio by simulating a surround sound effect. This feature is only available on the 42". 11. Preset: Restore the default audio settings. FEATURE MENU The Feature menu is shown below. This menu contains options to set the language, time, and other se...
Page 22 - Enter Password; Digital Captions Setup:
20 function is enabled. The blocked channels or source signals can be unlocked by entering the password. Note: This feature is only available in TV, Composite and S-Video source modes. (The default password is: 0 0 0 0.) Enter Password ENTER Exit Menu FEATURE Parental Control Move Select Return Exit...
Page 23 - • After plugging the USB storage; • Select MultiMedia Menu in the; Set the display time
21 / Black / White/ Red / Green / Blue / Yellow / Magenta / Cyan. [Background Opacity] – Automatic / Solid / Flashing / Transparent / Translucent. [Edge Effect] – Automatic / None / Raised / Depressed / Uniform / Left Shadow / Right Shadow. [Edge Color] – Automatic / Red / Green / Blue / Yellow / Ma...
Page 25 - Restore all the; VGA MENU; Adjust the horizontal
23 for 480i content or 30 minutes for 1080i content. • Once 4GB of data gets stored, the time shift function will delete the stored data and restart the buffering of content. This occurs even for USB devices larger than 4GB. Note:Time Shift limitations: 1. When the Time Shift feature is activated, o...
Page 26 - TIPS; Care of the screen; • Reorient or relocate the receiving
24 5. Auto Adjust: Adjust the settings automatically. 6. Preset: Restore the default VGA setting values. TIPS Care of the screen Do not rub or strike the screen with anything hard as this may scratch, mar, or damage the screen permanently. Unplug the power cord before cleaning the screen. Dust the T...
Page 27 - Modifications
25 • Consult the dealer or an experienced radio or television technician for help. Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by our company may void the user’s authority to operate the equipment. Cable...
Page 28 - PRODUCT SPECIFICATION; DISPLAY; Viewable; CONNECTIONS; Rear Connectors; Component Video and L/R Audio input
26 PRODUCT SPECIFICATION NOTE • This model complies with the specifications listed below.• Designs and specifications are subject to change without notice.• This model may not be compatible with features and/or specifications that may be added in the future. Model No. L32C1120 L42C1180 DISPLAY Viewa...
Page 30 - TROUBLESHOOTING; Symptoms
28 TROUBLESHOOTING Please make these simple checks before calling service. These tips may save you time and money since charges for receiver installation and adjustments of customer controls are not covered under your warranty. Symptoms Items to Check and Actions to follow “Ghost” or double image • ...
Page 31 - GLOSSARY; Motion Picture Association of America.
29 GLOSSARY HDTV HDTV displays are technically defined as being capable of displaying a minimum of 720p or 1080i active scan lines. HDMI Inputs High-Definition Multimedia Interface. Audio / Video Inputs Located on the rear of the receiver, these connectors (RCA phono type plug) are used for the inpu...
Page 32 - WARRANTY
30 WARRANTY This Haier brand product, when shipped in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective product with a new or re-manufactured equivalent, for parts or labor for the ...
