Haier HWM62-0566- User Manual

Page 2 - Contents; Usage of the drain hose

Contents Names of the parts Safety precautions Trouble shooting Packing list Specification Installation and adjustment Usage of the drain hose Preparation before washing Put in the laundries Usage of the detergent Close the top lid Installation the water inlet hose Disposal after washing * Finish wa...

Page 3 - Warning sign; Names of the parts; Meaning and description of the symbols; Forbidding sign

1 P l e a s e c h e c k i f t h e p o w e r r e c e p t a c l e h a s g o o d e a r t h i n gc o n d i t i o n b e f o r e u s i n g t o g u a r a n t e e y o u r s a f e t y. Warning sign Names of the parts Meaning and description of the symbols Forbidding sign Contents marked with that symbol are ...

Page 4 - Safety precautions; Do not use water hotter than 50 C .

2 Safety precautions Please insert the power cord into special receptacle with rated vol-tage.Be sure to use single-phase three pins receptacle.The earthing terminal of the receptacle must be earthed reliably.If possible,please adopt electric leakage protector. When the machine is normallyusing, ple...

Page 6 - Installation and adjustment; Install the inner cover component; Figure 2; Adjust the Installation position

4 Installation and adjustment Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. Install the inner cover component 1.Open the top lid of the washing machine.2.Put the inner cover component on the ...

Page 7 - Usage of the drain hose; hang hook, take the drain hose into cabinet from the left of base; How to change the direction of the drain hose

5 1. The height of the drain hose shall be less than 10cm, or the drainage will not be smooth, and cost such long time that the machine may stop at mid way. 2. Do not trample or press the drain hose. 3. If the drain hose is too long, cut it at mid point. To make smooth drainage, cut the front end of...

Page 8 - Confirm the water faucet; Installation the water inlet hose

6 The exit end face of the faucet Confirm the water faucet Connection between the water inlet hose jointer and the water faucet water faucet, suitable water faucet, not suitable It is required that the front end shall be longer than 10mm.The exit end face of the faucet shall be flat and smooth. If n...

Page 10 - Preparation before washing; Pay attention to followings before washing the laundries

8 1 Preparation before washing Preparation before washing1.Connect the water inlet hose. Open the water faucet.2.Confirm that the washing machine is earthed reliably. Then insert the power plug into the receptacle. The earth terminal shall not link to gas pipeline and faucet water pipeline.3.Put dow...

Page 11 - Put in the laundries; How to use the washing powder; U s a g e o f t h e d e t e r g e n t; How to use the whitener; How to use the softener

9 2 Put in the laundries The capacity of washing and spinning of he machinerefer to the largest weight ofthe standard laundries underdry conditionthat can be washed or spinned in one time. One time washing quantity shall be lower than the rated capacity.The thickness, size, type of the cloth will in...

Page 12 - Close the top lid; Description of the function of buttons; Use the operation buttons; Mode and meaning of the indicators; Reserve/remain time indicator digitron; Child lock function; RESERVE HOURS; RESERVE

10 4 Close the top lid Except draining, if the top cover is opened, the washing machine will stop running and alarm. Description of the function of buttons 5 Use the operation buttons Page 15 Mode and meaning of the indicators The light is off Flashing: indicate the running program or indicate the w...

Page 13 - Program; WATER LEVEL; PROGRAM; POWER; Water level

11 Quick Quick and high-efficiency wash for common laundries Jeans Fibre Cotton Standard Tub dry Posthaste Program button Following automatic programs are available for selection Program Common During common and standard programs, the washing machine can detect the laundries automatically. After det...

Page 14 - The full procedure is controlled automatically.; Attention

12 b Steps of using the operation buttons and description of each step. Page 11 W AS H S O A K R I N S E S P I N FLASH LIGHT FLASH LIGHT STANDARD COMMON F U Z Z Y POSTHASTE QUICK JEANS FIBRE COTTON TUB DRY START/PAUSE PROCESS/FUNCTION RESERVE WATER LEVEL PROGRAM POWER HEAVY WASHHEAVY RINSE HEAVY SPI...

Page 15 - P r o c e d u r e p r o g r a m s e l e c t i o n m e t h o d (; suitable reserve wash program; Finish washing

13 Page 10 WATER LEVEL water pressure and water level influence the wash time. Push the SELECT button for 6 times, and it will resume the initial mode. It will circulate in that sequence. When the "PROCESS/FUNCTION" button is on the "FUNCTION" state, push - "PROCESS/FUNCTION"...

Page 16 - Disposal after washing

14 F i g u r e 1 7 Disposal after washing After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may Influence your using the machine. Please first pull off the power plug from the receptacle before cleaning. 1.The method of dismantle:Push it up aslant...

Page 17 - Common phenomena; Phenomena; Phenomenan The reason How to settle; Trouble-shooting Answer to question

15 Common phenomena Phenomena Explanation The wash procedure is paused The digitron displays E0. The safety switch acts, and the spin-ning cannot work. Amend twiceautomatically ,The digitron displays E3. The water filling does not work, or is slow. The digital displays E4. The drainage cannot work, ...

Page 18 - Packing list; Fully automatic washing machine; Specification

16 Packing list User's manual One piece Name Tapping screws Quantity Bottom plate One piece T h e e n d c o n n e c t i n g t o t h e w a s h i n g m a c h i n e J o i n t e r c o n n e c t i n gt h e w a t e r i n l e t h o s et o t h e w a t e r f a u c e t T h e e n d c o n n e c t i n g t o t h ...

Haier HWM62-0566- User Manual

Table of Contents:

Other Manuals for Haier HWM62-0566

Summary

Other Haier Models