Haier HWF10BW1 - User Manual

5 Bef ore Use Descrip on This diagram may be slightly from the layout of the washing machine you have just purchased. Preparing the machine Remove all the packing materials to prevent unsteadiness, including the polystyrene base. Upon opening the package, water drops may be seen on the bag and the p...

6 In on Dismantle the transport on bolts The transpo on bolts are designed for clamping an - vib on components inside of the washing machine Remove the back cover. 1.2. 3.4. Remove the four bolts on the rear side and take out the back cover. Fill the holes le by the bolts with blanking plugs. Note: ...

1200 1400 1000 800 8 1.2.3. Program Dial 4. Wash Temp 5. Spin Speed 6.7. Extra Rinse 8.9.10. LED Display Delay Oper onal Func ons Nº Func on Explica on 1 Detergent drawer 2 Program Dial Wash Temp Spin Speed 3 4 5 6 ons Open the drawer, three compartments can be seen: Compartment 2:Det ergent for pro...

10 Program Modes ons n 90° C 30°C c 60°C 30°C Chemical fibre fabrics 3 Mix 60°C 30°C 4 W ool 40°C --- Wool 5 Under wea r 60°C 40°C Underwear 6 Sport 40°C 20°C Sports Wear 7 Jeans 60°C 30°C 8 Hygienic 90°C n 11 Daily W as h 60°C 30°C s 9 Fast 40°C 40°C 10 Exp ress 15 40°C --- h 12 Baby Car e 90°C 40°C...

12 Washing Methods the machine is use for commercial purpose the guarantee will not be valid anymore. Do not use it for purposes other than that for which on the label of each garment and wash only machine-washable garments. Power Supply Connect the washing machine to the power supply (220V to 240V~...

13 Sele ng Detergent The wa cy and the performance is determined by the quality of detergent used. Special non-foaming detergent produces good washing results. Use spe etergents for synthe and woollen goods. Do not use dry cleaning agents such as trichloroethylene and similar products. Do not add mo...

16 Cleaning and Care Maintenance A er washing Turn o the water supply and remove the electrical Cleaning the detergent drawer Cleaning the machine Unplug the machine during cleaning and maintenance. Use a so cloth dampened with soap liquid to clean the machine case and rubber components. Do not use ...

17 Water inlet valve and inlet valve r To prevent blockage to the water supply by ingress of foreign substances, clean the water inlet valve and inlet valve regularly. Moving the machine Remove the back cover. Remove the blanking plugs. Tighten the bolts with a spanner. Replace the ba If the applian...

20 Technical data Basic technical informa on regarding the appliance. Power source Max. working current (A) 220 - 240V~/50Hz 10 Water pressure (MPa) Nominal load (kg) 1 10.0 16 Max. spinning speed (rpm) Washing programs 1400 Max. power (W) 5 9 5 x 0 5 6 x 0 5 8 ) m m W x D x H ( s n o is n e m i D 2...