Page 3 - IMPORTANT SAFETY INSTRUCTIONS
4 5 Safety and warnings Safety and warnings ! WARNING! ! WARNING! IMPORTANT SAFETY INSTRUCTIONS WARNING! Caution, risk of fire-this is a safety symbol. Failure to follow the warnings outlined in these user insructions can cause a fire hazard. Fire Hazard • Only dry fabrics that have been washed with...
Page 5 - OPTIONAL: Install noise reduction pads
9 8 Install ation Installation Preparation Remove all packaging material including polystyrene base. While opening the package , water drops may be seen on pla stic bag and porthol e. This is normal as a result from water tests and quality control in the factory. Inlet hose 1. Connect inlet hose to ...
Page 6 - programme selector; Programme selector; Dete rgent drawer; about 2 seconds to switch off. If no
10 11 1. Door 2. Detergent/Softener drawer3. Wor k t op4. Control panel5. Service flap6. Adjustable feet Product description Control Panel A ccessories Check the a ccessories and li teratu r e in a ccordance with this list. 2. Display 3. programme selector 4. Power button 5. Function buttons (a-g) (...
Page 7 - Note: Liquid detergent; off and only perform wash function.
12 13 Control panel-function buttons Displ a y symbols Control panel- Note: Liquid detergent If using liquid detergent, it is not recommended to activate the end time delay. 1.4.2 Function “Time/Air Dry” 1-3 1-5 1.4 Function buttons The function buttons (Fig. 1-2) enable additional op- tions in the ...
Page 8 - Consumption; General in formation and tips:; Auto Sense, Dry ON is the program recommended for cotton loads.; Programmes
14 Detergent compartment for: Liquid detergent Softener, Conditioning agent etc. Powder detergent 1 2 3 15 Consumption General in formation and tips: Eco, 40 ℃ , 1400rpm is the program recommended for a normally soiled cotton load. Auto Sense, Dry ON is the program recommended for cotton loads. 1 2 ...
Page 12 - Care and cleaning; Choose the best detergent; Fd
Door cannot be opened due to water level or hot water in the drum,or if the drum is still moving,wait for it to stop before attempting to open the door. Auto 1 : 25 19 : 30 Remaining delay end time Likely showing the delay end operation. LocI- End E2 Lock – error with door. Shut the door properly. E...
Page 14 - Basic technical information regarding the appliance; Power source; Technical data
Basic technical information regarding the appliance Power source Max working current (A) Water pressure (MPa) Nominal load ( kg)-Wash Max spinning speed (rpm) Washing programmes Max power (W)-Wash Dimensions (Hx DxW mm) Net weight (kg) 220-240V/50Hz 10 0.03 P 1 8 1400 16 1850 850*550*595 76 26 Techn...