Haier HSU-18CK13(T3)- User Manual

4 Outdoor Unit Remote signal receiver Operation mode indicator Timer mode indicator Power indicator Vertical flap Air filter Inlet grille Indoor Unit Parts and Functions Emergency switch(manual) Test running switch(manual) Use remote controller toadjust up and down air flow.(Don't adjust it manually...

5 Hints After replacing with new batteries, remote controller will conduct self-check, displaying all information on LCD. Then, it will become normal. Buttons and display of the remote controller. Parts and Functions 1.Mode display AUTO COOL DRY HEAT FAN2. SWING display3. FAN SPEED display4. HEALTH ...

7 Operation When in use, put the signal transmission head directly to the receiver hole on the indoor unit. The distance between the signal transmission head and thereceiver hole should be within 7 m without any obstacle as well. Don't throw the controller, prevent it from being damaged. When electr...

8 Operation (4) Unit stop (1) Unit start mode changes as follows: Press ON/OFF button, unit starts. Previous operation status appears on display. (Not Timer setting) Power indicator on indoor unit lights up. (2) Select operation mode Press MODE button. For each press, operation AUTO COOL DRY HEAT FA...

Operation Press MODE button. For each press, operation Recommendations: 9 COOL,HEAT and DRY operation Use COOL in summer. Use HEAT in winter Use DRY in spring, autumn and in damp climate. (1) Unit start mode changes as follows: Press ON/OFF button, unit starts.Previous operation status appears on di...

11 Operation TIMER Operation You can let unit start or stop automatically at following times: Before you wake up in themorning, or get back from outside or after you fall asleep at night. Set Clock correctly before starting Timer operation TIMER ON/OFF Power indicator on indoor unit lights up. (1)Af...

13 Operation HEALTH Mode operation (1) Press the ON/OFF switch. (2) Press the "HEALTH" once," " is displayed, now the air conditioner is operating the health function. (3) Press the "HEALTH"again,then the health function stops. The anion generator in the air conditioner can g...

Pi Pi...Pi 14 Emergency and Test Operation Use this operation only when the remote controller is defective or lost. When the emergency operation switch is pressed,the" Pi "sound is heard once, whichmeans the start of this operation. In this operation, it is possible to change thesettings of ...

15 Comfortable SLEEP Operation In COOL mode sleep in selected mode. Before going to bed at night, you can simply pressthe SLEEP button and unit will bring you a sound One hour after SLEEP mode starts, temp. will become 1 o C higher than temp. setting. After running for another 1 hour, temp. rises by...

16 Maintenance Different models have different appearance Cleaning of unit casing Cleaning of remote controller Cleaning of air filter Cut off power supply before cleaning unit casing with soft cloth. In case of heavy stain, clean it with neutral detergent. squeeze water in the cloth, wipe off the d...

17 Maintenance Better use of air conditioner Proper room temperature. Cleaning of the air filter. Effective use of the timer. Closing of doors and windowsduring operation Never fail to observe the followings Do not sprinkle water over the unit. Do not block the inlet or outlet. Do not pull power plu...

18 Trouble shooting Before asking for service, check the following first. NormalPerformanceinspection Noise is heard Phenomenon Cause or check points The system does not restartimmediately. Smells are generated. Mist or steam are blown out. Multiple check Does not work at all. Poor cooling Applicati...