Haier HLP455E - Manual - manualsarea.com

Page 2 - t h e b a c k c o v e r

Contents Contents t h e b a c k c o v e r Safety precautions Installation and adjustment Preparation before washing The musts in washing Usage of the detergent Washing sequence Disposal after washing Packing list & Specification Names of the parts Trouble-Shooting Answer to question

Page 3 - Names of the parts; Meaning and description of the symbols; Warning sign

Names of the parts Wash tub Wash tub cover Outer cover of the spin tub Inner cover of the spin tub Spin timer Wash timer Wash selector Water-filling entrance Control panel Spin tub Cabinet Power cord Hook of fixing the drain hose Back cover Drain hose Cabinet handle Filter cover Bottom foot Pulsator...

Page 4 - Safety precautions

Safety precautions Please insert the power cord into special receptacle with rated voltage. Be sure to use single-phasethree pins receptacle. The ground terminal of the receptacle must be properly grounded. If possible, please adopt electric leakage protector. When the machine is normally using, ple...

Page 6 - Installation and adjustment; Usage of the drain hose; Install the water inlet hose

Installation and adjustment Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. Usage of the drain hose 1.The height of the drain hose shall be less than 10cm, or the drainage will not be smooth, a...

Page 7 - Preparation before washing; Pay attention to followings before washing the laundries

Preparation before washing Preparation before washing1.Connect the water inlet hose.2.Confirm that the washing machine is properly grounded . Then insert the power plug into the receptacle. Do not connect the ground terminal to the gas pipe and tap water pipe.3.Put down the drain hose . 4.Slanting o...

Page 8 - Operating instructions; Usage of the detergent; How to use the whitener; How to use the washing powder; Washing sequence; CYCLE SELECTOR

Operating instructions The capacity of washing and spinning of the machine refer to the largest weight of the standard laundries under dry condition that can be washed or spinned in one time. The thickness, size, type of the cloth will influence the actual washing capacity. It is suitable to put in ...

Page 9 - Wash

Figure 1 Washing sequence Wash 2. Fill the water and add the dissolved washing powder to make the water level reach the preset position. Run washing program for some time to stir and dissolve the powder completely.(Figure 1) 3.Put in the laundries. If the water quantity is insufficient, please add w...

Page 10 - Maintenance and cleaning; When the remained water is frozen; into the wash tub

Please first pull off the power plug from the receptacle before cleaning. Maintenance and cleaning Wipe the complete unit with soft cloth twisted dry.Wipe with neutral detergent if too dirty.Do not wash it directly by water. After washing, dismount the water inlet hose. Do not store water in the tub...

Page 11 - Problem Possible reason; There may be some

9 Trouble-shooting If there's breakdown, please pull off the power plug before checking Problem Possible reason The machine does not act. Is there power failure?Is the power plug loose?Is the pulsator twisted by foreign materials? Is the drain hose frozen?Is the drain hose blocked by foreign materia...

Page 12 - Packing list; Water level L; Specification

Water inlet hose Gland Packing list Twin-tub washing machine Name Quantity User's manual Warranty card One piece One piece One piece One piece One set Water level L Maximum/17 Injection pressure(MPa) Specification 0.02 0.2

Haier HLP455E - Manual

Table of Contents:

Other Manuals for Haier HLP455E

Summary

Other Haier Models