Haier Dishwasher HDW9WHT- User Manual

Page 2 - Index

Index 1 S afety Is Very Important Close-up View (Control Panel) Close-up View (Interior) Detergent and Rinse Aid Loading the Dishwasher Turning on the Appliance Energy Saving Tips How to Keep Your Dishwasher in Shape Wash Cycle Table Cleaning and Special Maintenance Troubleshooting Installation Tech...

Page 3 - Safety Is Very Important; o maintain the EFFICIENCY and SAFETY of this appliance:

Safety Is Very Important Carefully remove and dispose of the packing material. Check to make sure that the appliance is not damaged. If in doubt, contact the retailer it was purchased from. This dishwasher is designed for washing household dishes and cooking utensils. Do not install this appliance o...

Page 5 - Detergent; Rinse Aid; Important; oading the Rinse Aid

Detergent and Rinse Aid... Detergent Detergent specifically intended for use with dishwashers must be used. The dispenser must be refilled be- fore the start of each wash cycle following the instructions provided in the "Wash Cycle Table." The deter- gent dispenser is located on the inside p...

Page 6 - Loading the Dishwasher; The lower rack; In fo rm atio n on com parab ility t est s im p le-

Loading the Dishwasher Before placing the dishes in the dishwasher, remove the larger food particles to prevent the filter from becoming clogged. If the pots and pans have baked-on food that is extremely hard to remove, we recommend they are soaked before washing. This will eliminate the need for ex...

Page 7 - urning on the Appliance

Notice: W hen washing, the knob will not rotate itself. T urning on the Appliance Starting a wash cycle... M ake sure that the plug for the appliance is inserted into the wall socket. Make sure that the water supply is turned on to full pressure. Load the dishes. Pour in the detergent. Press the ...

Page 8 - Energy Saving Tips; After Every Wash; Remove the Plug; DO NOT LAY THE MACHINE ON ITS RIGHT HAND SIDE; hen You Go on Holiday; ow to Keep Your Dishwasher in Shape

It is important to try and run the dishwasher when it is fully loaded to save on energy. Rather than run a full cycle for a half load, you can run the "PRE-RINSE" cycle which will prevent odours from forming and food from caking onto the dishes. Choose the right wash cycle: the choice of cyc...

Page 9 - Wash Cycle Table

Wash Cycle Table ( ) AS/NZS 2007 test with rinse aid setting 5 W ash programme Description of cycle Pre-wash with hot water.Extended wash at 70°C.Rinses with cold water.Rinse with hot water.Drying. Pre-wash use cold water.Extended wash at 50°C.Rinse with cold water.Rinse with hot water.Drying. Hot r...

Page 10 - Cleaning and Special Maintenance; Filter Assembly; Cleaning the Spray Arms; Troubleshooting; Resolving minor problems yourself; Appliance does not start up

Cleaning and Special Maintenance Filter Assembly For the best performance and results, the filter assembly must be keep clean. The filter removes food particles from the wash water, allowing the water to be recirculated during the cycle. For this reason, it is a good idea to remove any food particle...

Page 11 - with the following information:

Troubleshooting If you take all these checks and the dishwasher still does not function or your dishwasher have any other error display, you can power the dishwasher OFF, and wait a few minutes. You can power the dishwasher on, try it again, if the dishwasher still does not function and/ or the prob...

Page 12 - roubleshooting

t he nature of the problem. the model type number (Mod...) And the serial number (S/N...), which are indicated on the plate located on the side of the inner part of the door. L ower spray arm rotates with difficulty S pray arm is blocked by small items or food remains. T roubleshooting Lid in deterg...

Page 13 - lastic items are discoloured

Troubleshooting ...with the dishes,cutlery, etc. Remnants of food are stuck to the dishes, cutlery,etc. D ishwasher was not loaded properly. Jets of water could not reach all parts of the dishes, etc. Too many items in the rack. Items in the rack were touching each other. Not enough detergent was ad...

Page 14 - Installation; Positioning the Appliance; Cold Water Connection; DO NOT CONNECT TO A PUSH THROUGH HOT WATER SYSTEM

Installation Positioning the Appliance Position the appliance in the desired location. The dishwasher is equipped with water supply and drain hoses that can be positioned to the right or left to allow correct installation. Levelling the Appliance Once the appliance is positioned, adjust the feet by ...

Page 15 - DO NOT USE ADAPTORS OR EXTENSION LEADS.

Attention: The plastic hose support must be fastened to the wall to prevent the drain hose from moving. Electrical Connection After making sure that the voltage and frequency in the home correspond to those on the rating plate of the appliance (located on the side of the stainless steel inner door) ...

Haier Dishwasher HDW9WHT- User Manual

Table of Contents:

Summary

Other Haier Models