Haier CHLF103Q - Manual

English 4 • Select a suitable location for the dryer on a hard even surface away from direct sunlight or heat sources, baseboard heaters, cooking appliances etc. Any floor unevenness should be corrected with leveling legs located on the bottom of the dryer. Tools and materials required • Phillips he...

English 5 Exhaust System Connections 1. Do not use plastic flexible duct to exhaust the dryer. Excessive lint can build up inside exhaust system and create a fire hazard and restrict air flow.Restricted air flow will increase dryer times. If your present system is made up of plastic duct or metal fo...

English 7 Location of Your Dryer Do Not Install Your Dryer: • In an area exposed to dripping water or outside weather conditions. • In an area where it will come in contact with curtains, thick carpet,or any thing that will obstruct the flow of combustion and ventilation air. • On carpet floor must ...

English 9 Electrical Connections Requirements and Instructions The following are specific requirements for proper and safe electrical installation of your dryer. Failure to follow these instructions can create electrical shock and/or fire hazard. WARNING 1. This appliance must be properly grounded. ...

English 13 OPERATING INSTRUCTIONS Understanding the Control Panel Note: Features may vary per model. Start/Pause Button: (1) • Press the button to turn the dryer ON. Press this button once to start the dry process. Press this button once again to pause the activity during the dry cycle. Off Button: ...

English 15 PREPARATIONS BEFORE DRYING • Sort the clothes of the same kind (cotton, synthetics, woolen) to dry. • Dark and light colored clothes should be separately dried. Fabrics prone to losing lint and those prone to adhering lint shall be separately dried. Clothes prone to falling lint should be...

English 16 • The appropriate load shall be 1/3 ~ 1/2 of the drum volume. Avoid too much load, space is needed to allow clothes free rotation for uniform and wrinkle proof drying. • When drying big articles, only 2-3 pieces shall be loaded at a time and supplemented with small and medium sized articl...

19 Français TIMED DRY CYCLE 1. Press any button except "Off" button to power on. 2. Press "Timed-Dry Cycles" button and select "Timed Dry" cycle.• After powering on, press "Timed-Dry Cycle" button to select "Timed Dry" program. 3. Press "More Time" And...

20 Français RACK DRY CYCLE 1. Press any button except "Off" button to power on. 2. Press "Timed-Dry Cycles" button and select "Rack Dry" cycle. • After powering on, press "Timed-Dry Cycle" button to select "Rack Dry" program. 3. Press "More Time" And &...

21 The following sounds are normal during the operation of the dryer. • Tumbling sound: this is normal as the heavy wet clothes in the dryer are continuously being tossed around. • Air rushing noise: this happens as the dryer drum spins at very high RPM and the air is rushing through the dryer drum....

22 TROUBLE SHOOTING Dryer does not operate: • Check if unit is plugged in. The plug may have come loose. • Check if the electrical wall receptacle is of proper voltage. • Check if the circuit breaker needs to be reset or if the fuse needs to be replaced. • Check if the unit is in the “off ” model. P...

LIMITED WARRANTY Full ONE Year Warranty For 12 months from the date of original retailpurchase, Haier will repair or replace any partfree of charge including labor that fails due toa defect in materials or workmanship. Limited Warranty After only year from the original retail pur-chase date Haier sh...

Made in China Fabriqué en Chine Hecho en China Haier America New York, NY 10018 Printed in China HLF103QIssued: JULY 2006 IMPORTANT Do Not Return This Product To The Store If you have a problem with this product, please contact the "Haier Customer Satisfaction Center" at 1-877-337-3639. DATE...