Haier AE122BCAAA (H2EM-18H03)- User Manual

5 ON OFF Safety Precautions Notice The system should never be used for any other purposes than intended such as for preservation of food, flora and fauna, precision devices or work of art. It may cause deterioration of the articles. Do not put or use any spray near the air conditioner, and do not di...

ON/OFF Mode Fan Speed Swing Temperature Clock Timer Set Sleep Aux.HeatFileter Reset Reset 6 2 1 3 4 1 4 2 3 Operation instruction Fan operation Turn on the unit Press the ON/OFF button to turn on the unit The LCD display of the wire controller will show the previous working state (except for Timer, ...

OFF ON OFF ON AM PM AM PM Operation instruction Timer On/Off function Before using TIMER function, calibrate the clock first (referring to page 3). When you wake up inthe morning, before going back to home after work or after going to bed, you can let your air conditionerautomatically turn on or tur...

9 ** ** ** ** ** ** ** ** ** **** ** ** **/** 5 6 OFF ON OFF ON AM PM AM PM Operation instruction Timer On-Off function After turning on the unit, set the proper working mode The LCD of the wire controller will show working mode. (except for Timer, Sleep, Swing) Set of TIMER mode Press the TIMER but...

10 Decrease2 * Set Operation instruction Sleep operation Before going to bed, you can press the SLEEP button, the air conditioner will operate in comfort sleep mode to make you have a sound sleep. Before using this function, you should calibrate the clock first, otherwise, the SLEEP function will be...

Usersí Attention 11 Set proper room temperatureNot too low or high and make every people in the room feel comfortable. Do not press tightly with the LCD part of the wire controller to avoid damage of it. Do not let the cold air blows directly to human body for a long time and do not make the room te...

12 Check if there are any obstacles in the air inlet and outlet of indoor and outdoor unit to avoid the working efficiency drop. Please do install the air filter and insure it is not dirty. Otherwise, the unit is damaged or has trouble due to the dust entry into the unit. In heating, in order to pro...

13 If after the above checking and treatment, the air conditioner still cannot work normally, orfind the following phenomena, please stop the unit and contact the commissioned servicecenter. The fuse or breaker is often blown out or open circuit. In COOLING or DEHUMIDIFYING, there is water leakage. ...

14 When Troubles Occur Before installing, do read this ìSafety precautionsî carefully to guarantee theproper installation. The below attentive matters are divided into ì Warningî and ì Noteî two parts. When the wronginstallation occur, it is very possible death and severe injury and other serious ac...

15 1 * 3 1 5 4 ** ** ** ** ** ** ** ** ** **** ** ** ** **/** AUTO A B C D E F 2 1 6 1 Installation instruction Notice Warning This manual can not include all kinds of conditions, if you have newrequirements and questions, please contact with local Haier Sales Center. Before installing the unit, ple...

Installation instruction 1. Installation of Duct 2) Sectional shape of duct (mainly has rounded and rectangular two shapes) 16 3) Connecting mode 1)Duct material Rectangular duct The dimension of rectangular duct is the same as the air outlet of indoor unit,can be directly connected; the roundedduct...

! 17 Installation procedure Install indoor unit Notice Do not install the air conditioner at the place where the combustible gas maybe leak. In case of the leaked gas gather around the unit, it may cause fire accident. The indoor unit should be installed in the place where the cool air and warm air ...

19 B C B A *1m Installation procedure Install indoor unit When install the duct hidden type indoor unit, the return air box must be designed and installed, as Figure 1, Figure 2. The distance between the air outlet of duct and the air outlet of air conditioner should be no more than 1m (when the out...

20 Installation procedure Install indoor unit Install the hoisting screw Use M8 or M10 hoisting screw (4, prepare on site) (When the height of hoistingscrew is more than 0.9m, you must use M10), their gaps refer to the dimensionof air conditioner, according to the original structure and the followin...

21 * Installation procedure Install indoor unit Notice In order to normally drain water, the drain hose should be mated according to the installation manual. In order to avoid dew-forming, thermal insulation treatment should be done.Improper connection pipe may cause water enter indoor. Requirements...

! Permitted length and fall of connecting pipe Depending on the outdoor units, for details, please refer to the attahed manual of outdoor unit. Material and dimension of connecting pipe Perform connection of flared pipe to connect all the refrigerant pipes. Connection of refrigerant pipe Two spanner...

23 The connecting pipe max length of KRD-32N is 15m, and the max fall between indoor and outdoor unit is 5m;the connnecting pipe max length of KDR-70N is 50m, the max fall between indoor and outdoor unit is 30m.The max fall between two indoor units in one system is 10m. Installation procedure Connec...

24 Installation procedure Electric wiring Note:All the wires should be copper core wires.The power cable of indoor unit should be equipped according to the operation manual of indoor unit.Before finishing vacuumizing the refrigerant pipe system, do not supply power to indoor unit.When connecting the...

** ***** ***** 0.33 mm 2 AB CD **** Installation procedure Install wire controller 1. Remove the upper cover of wire controller The PC board is installed on the back cover ofwire controller. When remove the upper cover, pay attention not to damage PC board. 2. Install wire controller Drill 2 wall ho...

26 Flarer A Pipe diameter Dimension A(mm) Connecting pipe 6.35mm(1/4") 0.8~1.5 12.7mm(1/2") Installation procedure Other instruction and test Other instruction Set of the air sending of the fan motor Before leaving factory, the rotation speed of fan motor has already been set at standard cho...