Haier 1U18EH2VHA - Installation Manual
Haier 1U18EH2VHA – Installation Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Required Tools for Installation; Procedure for Selecting the Location; • Since drain flows out of the outdoor unit,; Clearances of Indoor and Outdoor Units
- Page 3 – Screw the mounting plate to the wall.; Piping Exit Options; Step 2 - Installation of the Indoor Unit
- Page 4 – Illustration 2; Extension piping to attach to this fitting is field supplied.; Mounting the Indoor Unit Onto the Wall Plate
- Page 5 – Table 1; Illustration 4; Step 4 - Interconnecting the Indoor and Outdoor Units; The standard lineset length is 25ft. If the installation length is
- Page 6 – Hazard of Explosion! Never use an open flame to detect gas; Leak Test; Attach a manifold gauge, micron gauge, and vacuum pump
- Page 7 – This product contains fluorinated greenhouse gases covered; Refrigerant Charge Label; oz; Contains fluorinated greenhouse gases; Are the connecting wirings of indoor and outdoor firmly
- Page 8 – DU; in
Ductless Split Air Conditioner
Indoor
AW09EH2VHA
AW12EH2VHA
AW18EH2VHA
Outdoor
1U09EH2VHA
1U12EH2VHA
1U18EH2VHA
Installation Manual
Step 1 - Preparation ...................................................................................................................... 2
Step 2 - Installation of the Indoor Unit ........................................................................................... 3
Step 3 - Installation of the Outdoor Unit ........................................................................................ 4
Step 4 - Interconnecting the Indoor and Outdoor Units ................................................................. 5
Step 5 - Leak Test and Evacuation .................................................................................................. 6
Step 6 - Charging ........................................................................................................................... 7
Section 7 - Explaining Operation to the End User ........................................................................... 8
.................................................................................................. 8
Section 9 - S
0010586954
eacoast Application ................................................................................................... 8
Table of Contents
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
INSTALLATION PAGE 2 ENGLISH Step 1 - Preparation Required Tools for Installation Procedure for Selecting the Location • Drill • Wire Snipper • Hole Saw 2 3/4” • Vacuum pump • Soap-and-water solution or gas leakage detector • Torque wrench • 17mm, 22mm, 26mm • Tubing cutter • Flaring tool • Razor kni...
INSTALLATION PAGE 3 ENGLISH 2.1 Step 2.1 Using a stud sensor, locate and mark the stud positions in the wall where the indoor unit is to be mounted. 2.2 Step 2.2 Place the mounting plate on the wall in the desired location taking into account the minimum clearances necessary for proper operation. Us...
INSTALLATION PAGE 4 ENGLISH Illustration 2 Illustration 3 2.9 Step 2.9 With the top of the indoor unit closer to the wall, hang the indoor unit on the upper hooks of the mounting plate. Slide the unit slightly side to side to verify proper placement of the indoor unit on the mounting plate. Rotate t...
