Grizzly Industrial G4013 - Manual
Grizzly Industrial G4013 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Extension Cords
- Page 4 – Wiring Safety; when connecting your machine to a
- Page 5 – SWITCH; Wiring Diagram
- Page 6 – Parts
- Page 7 – Label Placement
- Page 8 – Buy Direct and Save with Grizzly; ORDER
Specifications
Overall Size ...................... 30" L x 21" W x 35" H
Tub Depth ............................................. 10" Deep
Maximum Liquid Level ......10-Gallons or 5" Deep
Minimum Liquid Level ........ 6-Gallons or 3" Deep
Nozzle Diameter ....................................... 5.5mm
Pump Motor ....................... 110V, 0.7 Amp, 60 Hz
Pump Output .......................................... 50 GPH
Net Weight .................................................57 lbs.
MODEL G4013
20 GALLON PARTS
WASHER
INSTRUCTIONS
Damage to your eyes, lungs, and skin could
result from using this item without proper
protective gear, such as face shield, a respi-
rator, and rubber gloves.
COPyriGHT © AUGUST, 2009 By GrizzLy iNDUSTriAL, iNC.
WARNING: NO PORTION Of THIS MANUAL MAy bE REPRODUCED IN ANy SHAPE
OR fORM WITHOUT THE WRITTEN APPROvAL Of GRIzzLy INDUSTRIAL, INC.
#Cr12088 PriNTeD iN CHiNA
If you need help with your new item, call our Tech
Support at: (570) 546-9663.
Power Supply Circuit Requirements
Only connect this parts washer to a power supply
circuit that is protected with a GFCi (Ground Fault
Circuit interrupt) device.
If you are unsure about
the wiring codes in your area or you plan to
connect your machine to a shared circuit, con-
sult a qualified electrician.
Power Supply Voltage ........................... 110 Volts
Minimum Circuit Size ............................. 10 Amps
Inventory (figure 1)
Qty
Work Basket ...................................................... 1
Pump Box .......................................................... 1
Work Shelf ......................................................... 1
Tub ................................................................... 1
Shelf .................................................................. 1
Legs ................................................................... 4
Bolt Bag ............................................................. 1
—Phillips Head Screws M6-1 X 12 (Legs) 25
—Hex Nuts M6-1 (Legs) ........................... 25
—Lock Washers 6mm (Legs) ................... 25
—Phillips Head Screws M4-.7 X 10
(Switch Box) ............................................ 2
—Hex Nuts M4-.7 (Switch Box) .................. 2
—Lock Washers 4mm (Switch Box) ........... 2
figure 1. Assembly diagram.
Shelf
Tub
Legs
Work
Shelf
Pump Box
Work
Basket
Drain
Plug
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Model G4013 20-Gallon Parts Washer -3- figure 3 . Typical 5-15 plug and GFCi receptacle. Grounding Prong is Longest of the Three Prongs Current Carrying Prongs Grounded GFCI Outlet Power Connection Device This machine comes with a 5-15 style plug. For improved electrical safety against fire or elect...
-4- Model G4013 20-Gallon Parts Washer Wiring Safety These pages are current at the time of printing. However, in the spirit of improvement, we may make changes to the electrical systems of future machines. Study this section carefully. if there are differences between your machine and what is shown...
Model G4013 20-Gallon Parts Washer -5- Only connect this parts washer to a properly grounded GFCI (Ground Fault Circuit Interrupt) receptacle. Test the GFCI receptacle operation according to switch at the manufacturers recommended intervals. 110V Pump Motor SWITCH (viewed from behind) Ground Neutral...
