Greenheck Model SFD - Manual
Greenheck Model SFD – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Motor and Drive Installation Instructions; Model SWB units are shipped from stock without motors or drives .
- Page 3 – Installation; Affect of Installation on Performance; Discharge Positions
- Page 4 – Wheels; Model SWB; Installation of UL/cUL 762 Listed; and includes an access; Alignment of Pulleys and Belts; WARNING; Wrong Wrong Right
- Page 5 – Wheel Rotation; Approximate Wheel Clearance Dimensions; NOTE; tio; tio
- Page 6 – Wheel and Fastener Maintenance; Recommended Bearing Lubrication Schedule; Standard Grease; Number
- Page 8 – Troubleshooting; Warranty
Model SWB
Series 100
Model SWB
Series 200
Model SWB
Series 300
Model SFD
Table of Contents
Motor and Drive Installation
(Units Shipped from Stock) . . . . . . . . . . . . . . . . 2
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Affect of Installation on Performance . . . . . . . . . 3
UL/cUL 762 - Restaurant Exhaust . . . . . . . . . . . . 4
Pre-Starting Checks . . . . . . . . . . . . . . . . . . . . . . 4-5
Belt Drive Fan Maintenance . . . . . . . . . . . . . . . . . 6
Bearing Lubrication Schedule . . . . . . . . . . . . . . . 6
Motor Maintenance (Belt and Direct Drive) . . . . . 6
Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Troubleshooting Chart . . . . . . . . . . . . . . . . . . . . . 8
Model SFB
Installation, Operation and Maintenance Manual
Please read and save these instructions for future reference . Read carefully before attempting to assemble,
install, operate or maintain the product described . Protect yourself and others by observing all safety
information . Failure to comply with instructions could result in personal injury and/or property damage!
1
Centrifugal Utility Fans
Part #455308
Centrifugal Utility Fans
Model SWB - Series 100, 200 and 300
Models SFB and SFD
®
®
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Motor and Drive Installation Instructions Model SWB units are shipped from stock without motors or drives . 1 . Adjust motor pulley to its closed position for maximum fan speed or increments of 1/2 turn open (maximum of 5 turns open) for reduced fan speed . Tighten set screw on flat area only . 4 . ...
3 Installation Inspect the unit for any damage and report it to the shipper immediately . Also, check to see that all accessory items are accounted for .Move the fan to the desired location and fasten securely through mounting holes provided in the base angles . The unit must be set level (shimming ...
Pre-Starting Checks Wheels Wheels must rotate freely and not rub on the inlet venturi . Model SWB wheels overlap the inlet venturi as shown in Figure 1 . Refer to the SWB fan wheel overlap and radial gap chart for proper dimensions . Models SFD and SFB wheels do not overlap the venturi, but have a g...
