Graco 244512 - User Manual
Graco 244512 – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – WARNING; WARNING
- Page 3 – Cleaning; Storage; Parts List
- Page 4 – Français; MISE EN GARDE
- Page 5 – Nettoyage; Liste des pièces
- Page 6 – Español; Advertencias; Cubiertas para rodillo adicionales; Instalación; Procedimiento de alivio de; ADVERTENCIA; Operación
- Page 7 – Lista de partes
- Page 8 – Limited Warranty
309319G
EN FR ES
To find your local Graco/M
AGNUM
authorized
service center
D
1-- 888-- 541-- 9788
D
Magnum.Graco.com
D
Graco/M
AGNUM
Authorized Service Centers list 302367
Instructions/Instrucciones
Important Safety Instructions
D
Read all warnings and instructions in this manual.
Save these instructions.
D
Lisez tous les avertissements et instructions en ce
manuel. Économiser ces instructions.
D
Lea todas las advertencias e instrucciones en este
manual. Guarde este manual.
Models CAN062, 244512, Series C / Modelos CAN062, 244512, Serie C / Des Modeles CAN062, 244512, Series C
D
20 in. (50 cm) heavy-duty extension / Rallonge robuste / Extensión para trabajos pesados
D
45
_
swivel adapter / Adaptateur à pivot / Adaptador giratorio
D
9 in. (23 cm) roller frame / Armature de rouleau / Soporte del rodillo
D
1/2 in. (13 mm) nap roller cover / gaine / Cubierta de lanilla del rodillo
3600 psi (24.8 MPa, 248 bar) Maximum Fluid Inlet Pressure/
*
/ Pression maximale d’admission de fluide
*
PresIón de entrada de fluido máxima
*
Use the lowest pressure that provides an even paint supply to the roller;
typically less than 300 psi (2.1 MPa, 21 bar).
Employez la plus basse pression qui fournit une offre égale de peinture au
rouleau ; en général moins de 300 psi (2.1 MPa, 21 bar).
Utilice la presión más baja que proporciona una fuente uniforme de la pintura
al rodillo; típicamente menos de 300 psi (2.1 MPa, 21 bar).
*
*
*
CAUTION
Never leave water in the pump, gun, or pressure roller.
Doing so could cause corrosion and damage from freezing.
For storage, flush the system with Graco Pump Armor
t
or
mineral spirits/paint thinner.
ATTENTION
Ne jamais laisser d’eau dans la pompe, le pistolet ou le
rouleau à peinture sous pression. Cela pourrait causer de
la corrosion et des dommages dus à la congélation. Pour
l’entreposage, vidanger le système avec du Pump Armor
t
de Graco, de l’essence minérale ou du solvant à peinture.
PRECAUCION
Nunca deje agua en la bomba, en la pistola ni en el rodillo
a presión. Esto podría provocar corrosión y daños por
congelamiento. Para su almacenamiento, lave el sistema
con Pump Armor
t
de Graco o solución alcohólica mineral
o disolvente de pinturas.
Pressure Roller
Rouleau à peinture sous pression
Rodillo a presión
t
GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440 --1441
E
COPYRIGHT 2001, GRACO INC.
Graco Inc. is registered to I.S. EN ISO 9001
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Was this manual helpful?
About this manual
- Brand
- Graco
- Model
- 244512
- Document type
- User Manual
- Language(s)
- English, Spanish, French
- Pages
- 8
- File size
- 194 KB
- Format
Other Manuals for Graco 244512
Summary
2 309319 English Warnings FIRE AND EXPLOSION HAZARD Improper grounding, poor ventilation, open flames or sparks can cause a hazardous condi- tion and result in a fire or explosion and serious injury. To help prevent injury from fire or explosion D Provide fresh air ventilation to avoid the buildup o...
309319 3 Cleaning This is the procedure for flushing the pressure roller. The pump and gun you are using may have additional flushing steps, such as cleaning filters and screens. See the pump and gun flushing instructions. NOTE: Leave the pressure roller attached to the gun for this procedure. See P...
4 309319 Français Mise en garde DANGER D’INCENDIE ET D’EXPLOSION Un mise à la terre erronée, une ventilation insuffisante, des flammes nues ou des étincel- les peuvent créer une condition dangereuse et provoquer un incendie, une explosion ou des blessures graves. Pour éviter les risques de blessures...
