Graco 205626 - Manual

5 308655 Installation System Accessories CAUTION Do not hang the air accessories directly on the airinlet (E). The fittings are not strong enough tosupport the accessories and may cause one ormore to break. Provide a bracket on which tomount the accessories. NOTE: Install the following accessories i...

7 308655 Operation Pressure Relief Procedure INJECTION HAZARD To reduce the risk of serious bodilyinjury, including fluid injection orsplashing in the eyes or on the skin, always follow this procedure whenever you shut offthe pump, check or service any part of the system,install or change dispensing...

8 308655 Operation Never allow the pump to run dry of the fluid beingpumped. A dry pump will quickly accelerate to ahigh speed, possibly damaging itself, and it mayget very hot. CAUTION 7. Read and follow the instructions supplied witheach component in your system. 8. If the pump will be unattended ...

9 308655 Air Motor and Throat Service Before You Start D Be sure you have all necessary parts on hand. Repair Kit 238751 includes repair parts for the air motor and pump. Use all parts in the kit for thebest results. Parts included in the kit are markedwith one asterisk, for example (19*), in the te...

13 308655 Displacement Pump Service Disassembly NOTE: Be sure you have all necessary parts on hand. Repair Kit 238751 includes repair parts for the air motor and pump. Use all parts in the kit forthe best results. Parts included in the kit aremarked with one asterisk, for example (19*), inthe text a...

15 308655 Parts Drawing When assembling the fluid cylinder(110) over the assembled fluidpiston (107, 109, 113), use thepiston assembly tool included inrepair kit 238751 and steps 21through 23 on page 12 . 16 24 11 30 22* 21* 25 23 12 21* 17* 26* *19 27b 27a 31 15 13 27c 32* 29 3 7 18 36 1 *20 5 28 1...

16 308655 Dimensions 1/2-in.npt airinlet 3/4-in.nptmufflerport Model 205626 25.8 in. (655 mm) MODEL 205626, Series J 3/4-in.npt fluidoutlet 18.4 in. (467 mm) 7.4 in. (188 mm) Model 222065 32.3 in. (820 mm) Model 222095 36.6 in. (929 mm) Note: Forsealed tankmounting usegasket192658. 06035 Mounting Ho...

17 308655 0 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 0 1 2 3 4 5 6 FLUID FLOW––gpm (lpm) Test Fluid: 10-weight oil at 75 _ F (23.9 _ C) To find fluid outlet pressure at a specific fluid flow and operating air pressure: 1. Locate desired fluid flow along bottom of chart. 2. Follow...

18 308655 Graco Standard Warranty Graco warrants all equipment manufactured by Graco and bearing its name to be free from defects in material and workmanship on thedate of sale to the original purchaser for use. With the exception of any special, extended, or limited warranty published by Graco,Grac...