Gold's Gym GGBE1774.0 - Manual
Gold's Gym GGBE1774.0 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – IMPORTANT PRECAUTIONS
- Page 4 – BEFORE YOU BEGIN
- Page 5 – ASSEMBLY
- Page 12 – ADJUSTMENTS
- Page 14 – EXERCISE GUIDELINES
- Page 16 – PART IDENTIFICATION CHART
- Page 20 – ORDERING REPLACEMENT PARTS
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
Model No. GGBE1774.0
Serial No.
Write the serial number in the
space above for future reference.
Serial Number Decal
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or if a part is
damaged or missing, PLEASE
CONTACT OUR CUSTOMER
SERVICE DEPARTMENT
DIRECTLY.
CALL TOLL-FREE:
1-877-776-4777
Mon.–Fri., 6 a.m.–6 p.m. MST
ON THE WEB:
www.goldsgympowerflex.com
USER’S MANUAL
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
3 1. Read all instructions in this manual and all warnings on the exercise rack before using the exercise rack. Use the exercise rack onlyas described in this manual. 2. It is the responsibility of the owner to ensure that all users of the exercise rack are ade-quately informed of all precautions. 3...
4 Adjustment Pin Arm Pad Dip Arm Right Side Left Side Note: The terms “right side” and “leftside” are determined relative to a per-son with their back to the backrest;they do not correspond to right andleft on the drawings in the manual. Backrest Resistance Band Adjustment Pin Push-up Handle Knee Pa...
1. Attach two Base Pads (17) to the Base (1) withtwo M4 x 20mm Screws (42). Press a Base Cap (16) onto a Base Handle (2). Repeat with the other Base Handle. Insert the two Base Handles (2) into the Base (1)as shown. Insert four M10 x 90mm Bolts (46) andtwo M10 x 87mm Bolts (47) up through the Base. ...
