GMC G25 - Manual

10 1 3 4 5 7 11 12 13 14 15 20 17 16 Know your product 1. Control panel2. Fuel tank cap3. Choke lever4. Recoil starter5. Side maintenance cover6. Fuel drain hose7. Engine switch8. Rating label9. Spark plug maintenance cover10. Muffler 11. AC socket12. Low oil alert indicator light (red)13. Overload ...

11 Inverter technology (including Smart Throttle System) This generator has been developed with inverter technology providing regulated, clean and “pure” electricity for a continuous uninterrupted stable power supply.Inverter technology provides confidence as a power source for camping applications,...

12 3. If the fuel is low, replace the filter screen inside the fuel tank neck (Fig. E). 4. Pour in unleaded fuel from an approved fuel container into the fuel tank (Fig. F). Because fuel expands, only fill the unit to the base of the filter housing. DO NOT FILL to the tip of the tank. Replace fuel c...

13 Stopping the engine 1. Before stopping, ensure that no electrical apparatus is connected to the generator. 2. Turn the engine switch (7) to the ‘off’ position (Fig. M). 3. Turn the fuel (2) vent lever to the ‘off’ position (Fig. N). Connecting apparatus to the generator Please note that it is not...

14 DC Applications The DC output should only be used for recharging 12-volt automotive lead acid type batteries, and do not charge batteries while they are connected to a vehicle. Make sure they have been totally disconnected prior to connecting to the generator for recharging. Note. Only use the DC...

15 • If electrolyte gets on your skin, flush with water. • If electrolyte gets in your eyes, flush with water for at least 15 minutes and call a physician immediately. • Electrolyte is poisonous. If swallowed, drink large quantities of water or milk and follow with milk of magnesia or vegetable oil ...

18 Troubleshooting Trouble Possible cause Suggested remedy Engine will not start 1. Low on fuel or oil content 1. Add fuel or oil 2. Ignition switch in “Off” position 2. Turn to “ON” position 3. Faulty spark plug 3. Replace spark plug 4. Choke in wrong position 4. Adjust choke accordingly 5. Unit lo...

19 Troubleshooting cont. DC circuit breaker continually tripping 1. Overload 1. Reduce load 2. Faulty cords or equipment 2. Check for damaged, bare, or frayed wires on equipment. Replace. 3. Incorrect cables used 3. Check to make sure you are using the DC cables supplied with the actual generator. U...

GMC customer assist If your product needs repairing, replacing, technical service or you simply need help or advice, please contact us on our Customer Assist Line 1300 880 001 (Australia) or 0800 445 721 (New Zealand). For prompt service we suggest you log your service request online at www.gmcservi...