Glem Gas GT64GWI - User Manual
Glem Gas GT64GWI Hob – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – usage other than that it is intended for.
- Page 3 – COOKTOP IDENTIFICATION; the appliance during its use.; model; number on the data plate:; MODELS
- Page 4 – LIGHTING THE GAS BURNERS; Warning
- Page 5 – USING THE GAS COOKTOP; (Fig.9 optional – design may vary to image; Minimum diameter; GAS COOKTOP INSTALLATION
- Page 6 – Fixing the cooktop; The instructions are for a qualified installer.; Gas Inlet Connection Point; cooktop and on this booklet.; Flexible Hose Connection
- Page 7 – CONVERSION TO DIFFERENT TYPES OF GAS; injectors must be replaced.; point as appropriate.; Replacing the injectors; CLEANING; Never remove the knobs from their housing to clean the cooktop.; Dry completely; Stainless Steel
- Page 8 – Cast Iron Trivets; GAS CONSUMPTION AND INJECTOR SIZES
- Page 9 – DIAGRAMS
- Page 13 – GLEM GAS AUSTRALASIA PTY. LTD. PRODUCT WARRANTY
1
Installation and Operating Instructions
Built in GAS Cooktops
Please note:
This cooktop must be installed by an authorised installer.
The enclosed installation check list must be completed and signed off
by the installer with the installer’s Licence number recorded to activate
the Warranty.
Call Service 1 300 307 917
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 IMPORTANT! This booklet is a fundamental part of the appliance, it should be retained. Read all instructions carefully before using the appliance. This appliance is to be installed by a qualified technician in accordance with the gas installation code AS5601, SAA wiring rules, as well as the requi...
3 COOKTOP IDENTIFICATION Warning: This appliance is designed to be built into a kitchen bench capable of withstanding the weight of the appliance during its use. ♦ The kitchen bench must be resistant to temperatures of at least 100°C. Check with the manufacturer of the bench material to be sure. No ...
4 LIGHTING THE GAS BURNERS Gas burners The flow of gas to the burners is regulated by the controls knobs. Depending on the model, the graphic symbols are printed on the knobs or the control panel (Fig. 10). The indicator symbols are: Valve closed, no gas flow Maximum capacity, maximum gas flow Minim...