Page 2 - English; Table of Content
2 English GA-5YXS1-RH/GA-5YXS-RH Motherboard Table of Content Item Checklist ........................................................................................ 3 Chapter 1 Introduction ............................................................................ 4 1-1 Considerations Prior to In...
Page 3 - Item Checklist
3 Introduction ; The GA-5YXS-RH motherboard (For GA-5YXS-RH) ; The GA-5YXS1-RH motherboard (For GA-5YXS1-RH) ; Serial ATA cable x 4 ; IDE (ATA133 ) cable x 1 / Floppy cable x 1 ; I/O Shield Kit ; CD for motherboard driver & utility ; GA-5YXS-RH/GA-5YXS1-RH Quick Reference Guide Item Checklist * ...
Page 4 - Chapter 1 Introduction; Considerations Prior to Installation; Preparing Your Computer
4 English GA-5YXS1-RH/GA-5YXS-RH Motherboard Chapter 1 Introduction 1-1 Considerations Prior to Installation Preparing Your Computer The motherboard contains numerous delicate electronic circuits and components which can becomedamaged as a result of electrostatic discharge (ESD). Thus, prior to inst...
Page 5 - Features Summary
5 Introduction 1-2 Features Summary Form Factor y 12” x 9.6” ATX form factor, 6 layers PCB. C P U y Supports single Intel ® Xeon ® processor y Intel Xeon ® Dual-Core/Quad-Core processor in LGA 775 socket y Supports 800/1066/1333MHz FSB Chipset y Intel ® 3200 Chipset y Intel ® ICH9R Memory y 4 x DDR2...
Page 9 - Chapter 2 Hardware Installation Process; Installing Processor and CPU Haet Sink
9 Hardware Installation Process Chapter 2 Hardware Installation Process 2-1 Installing Processor and CPU Haet Sink Before installing the processor and cooling fan, adhere to the followingcautions:1. The processor will overheat without the heatsink and/or fan, resulting in permanent irreparable damag...
Page 11 - Install Memory Modules
1 1 Hardware Installation Process 2-2 Install Memory Modules Before installing the memory modules, please comply with the following conditions:1 . Please make sure that the memory used is supported by the motherboard. It is recommended that memory of similar capacity, specifications and brand be use...
Page 13 - Connect ribbon cables, cabinet wires, and power supply
1 3 Hardware Installation Process 2-3 Connect ribbon cables, cabinet wires, and power supply 2-3-1 : I/O Back Panel Introduction
Page 14 - LAN LED Description
1 4 English GA-5YXS1-RH/GA-5YXS-RH Motherboard LAN LED Description LED1 (Green) LED2 (Green/Yellow) Color Condition Description Green O N LAN Link / no Access Green BLINK LAN Access - OFF Idle - OFF 10Mbps connection - OFF Port identification with 10 Mbps connection Green O N 100Mbps connection Gree...
Page 15 - Connectors Introduction & Jumper Setting
1 5 Connector Introduction 2-4 Connectors Introduction & Jumper Setting 1. ATX2 12. USB3 (USB cable connector) 2. ATX1 13. HDDBPB1 3. IDE1 (IDE cable connector) 14. IPMB1 4. FDC1 (Floppy cable connector) 15. FAN1 (CPU fan cable connector) 5. SATA_1 (SATA cable connector) 16. FAN2 (System fan cab...
Page 20 - CAUTION
2 0 English GA-5YXS1-RH/GA-5YXS-RH Motherboard 15/ 16/ 17 ) FAN1 (CPU fan / System fan cable connectors) The cooler fan power connector supplies a +12V power voltage via a 3-pin/4-pin(CPU_FAN) powerconnector and possesses a foolproof connection design. Most coolers are designed with color-coded powe...
Page 24 - Block Diagram; MCH
2 4 English GA-5YXS1-RH/GA-5YXS-RH Motherboard 2-5 Block Diagram VRD 11.0 ISL6306/6326CR CHANNEL ADDR2 667/800 Un-Buffered ECCDIMM x 2 CHANNEL BDDR2 667/800 Un-Buffered ECCDIMM x 2 MCH BIGBY-V (INTEL 3200) ICH9R ITE 8718F COM2 COM2 KB & M S Floppy Connector CLOCK GENERATOR ICS9LPR502 PCIE x8 Slo...
Page 25 - Chapter 3 BIOS Setup
2 5 BIOS Setup < Ç > Move to previous item < È > Move to next item < Å > Move to the item in the left hand < Æ > Move to the item in the right hand <Esc> Main Menu - Quit and not save changes into CMOS Status Page Setup Menu andOption Page Setup Menu - Exit current page...
Page 27 - System Time; Main
2 7 BIOS Setup System Time The time is calculated based on the 24-hour military time clock. Set the System Time(HH:MM:SS) System Date Set the System Date. Note that the “Day” automatically changed after you set the date. (Weekend: DD: MM: YY) (YY: 1099~2099) Main Once you enter Phoenix BIOS Setup Ut...
Page 28 - Transfer Mode; Ultra DMA Mode
2 8 GA-5YXS1-RH/GA-5YXS-RH Motherboard SATA Port 1/2/3/4/5/6 The category identifies the types of Serial SATA hard disk from drive 1 to 6 that has beeninstalled in the computer. System will automatically detect HDD type.Note that the specifications of your drive must match with the drive table. The ...
Page 29 - Advanced Processor Options; Advanced Processor Option
2 9 BIOS Setup Advanced Processor Options Figure 1-1: Advanced Processor Option Advanced Processor Option This category includes the information of CPU Speed, Processor CPUID and Processor L2Cache. Setup menu for C1 Enhanced Mode, No Execute Mode Memory Protection,Intel EIST Support, and PECI Interf...
Page 31 - Advanced; About This Section: Advanced
3 1 BIOS Setup Figure 2: Advanced Advanced About This Section: Advanced With this section, allowing user to configure your system for basic operation. User can change the Memory Configuration, PCI Configuration, I/O Configuration, Advanced Chipset Control andHardware Monitor.
Page 32 - Memory Configuration; Status; Extended RAM Step
3 2 GA-5YXS1-RH/GA-5YXS-RH Motherboard Memory Configuration Figure 2-1: Memory Configuration Installed Memory/Available to OS/Used by devices/ DIMM Group 1,2,3,4 Status These category is display-only which is determined by POST (Power On Self Test) of theBIOS. & & & & & Clear Mem...
Page 33 - PCI Configuration; Embedded NIC
3 3 BIOS Setup PCI Configuration Figure 2-2: PCI Configuration Embedded NIC Onboard LAN1 Control Enabled Enable onboard LAN device. (Default setting) Disabled Disable this function. LAN1 Option ROM Enabled Enableing this item to initialize device expansion ROM. Disabled Disable this function. (Defua...
Page 35 - I/O Device Configuration; Serial Port A; This allows users to configure serial prot A by using this option.; Serial Port B
3 5 BIOS Setup I/O Device Configuration Figure 2-3: I/O Device Configuration Serial Port A This allows users to configure serial prot A by using this option. Enabled Enable the configuration (Default setting) Disabled Disable the configuration. Base I/O Address/IRQ 3F8/IRQ4 Set IO address to 3F8/IRQ...
Page 36 - Native Mode Operation
3 6 GA-5YXS1-RH/GA-5YXS-RH Motherboard Base I/O Address/IRQ 3F8/IRQ4 Set IO address to 3F8/IRQ4. 2F8/IRQ3 Set IO address to 2F8/IRQ3. (Default setting) 3E8/IRQ4 Set IO address to 3E8/IRQ4. 2E8/IRQ3 Set IO address to 2E8/IRQ3. USB Controller This item allows users to enable or disable the USB device ...
Page 37 - SATA RAID Enable
3 7 BIOS Setup driver supports AHCI mode. Disabled Disabled this function. SATA RAID Enable Enabled Enabled SATA RAID function. Disabled Disable this function. (Default setting)
Page 38 - Advanced Chipset Control; Enable Multimedia Timer
3 8 GA-5YXS1-RH/GA-5YXS-RH Motherboard Advanced Chipset Control Figure 2-4: Advanced Chipset Control Enable Multimedia Timer Yes Enable Multimedia Timer support. (Default setting) No Disable this function.
Page 39 - Hardware Monitor; CPU / Motherboard Temperature
3 9 BIOS Setup Hardware Monitor Figure 2-5: Hardware Monitor CPU / Motherboard Temperature Display the current CPU temperature, Motherboard, and Ambient temperature. Voltage Monitor: DDR1V8, VCC3, VCORE, 0V9, 5V Detect system's voltage status automatically. FAN Monitor: CPU FAN/ Front FAN/ System FA...
Page 41 - Security; Set User Password
4 1 BIOS Setup Security Figure 3: Security Set User Password You can only enter but do not have the right to change the options of the setup menus. Whenyou select this function, the following message will appear at the center of the screen to assistyou in creating a password.Type the password up to ...
Page 43 - Server
Page 44 - System Management; Server Management
4 4 GA-5YXS1-RH/GA-5YXS-RH Motherboard System Management Figure 4-1: System Management Server Management This category allows user to view the server management features. Including information ofBIOS Version. All items in this menu cannot be modified in user’s mode. If any items requirechanges, plea...
Page 45 - Console Redirection; BIOS Redirection Port
4 5 BIOS Setup Figure 4-2: Console Redirection Console Redirection BIOS Redirection Port If this option is set to enabled, it will use a port on the motherboard. Serial Port A Use Serial Port A as he COM port address. Serial Port B Use Serial Port B as he COM port address. Disabled Disable this func...
Page 46 - Flow Control; Terminal Type
4 6 GA-5YXS1-RH/GA-5YXS-RH Motherboard Flow Control This option provide user to enable the flow control function. None Not supported. XON/OFF Software control. CTS/RTS Hardware control. (Default setting) Terminal Type This option allows user to select the specified terminal type. This is defined by ...
Page 48 - Boot; Boot Priority Order
4 8 GA-5YXS1-RH/GA-5YXS-RH Motherboard Boot Figure 5: Boot Boot Priority Order This field determines which type of device the system attempt to boot from afterPhoenixBIOS Post completed. Specifies the boot sequence from the available devices. Ifthe first device is not a bootable device, the system w...
Page 49 - Exit
4 9 BIOS Setup Exit Figure 6: Exit About This Section: Exit Once you have changed all of the set values in the BIOS setup, you should save yourchanges and exit BIOS setup program. Select “Exit” from the menu bar, to display thefollowing sub-menu. Exit Saving Changes Exit Discarding Changes Load Sett...
Page 50 - Exit Saving Changes
5 0 GA-5YXS1-RH/GA-5YXS-RH Motherboard Exit Saving Changes This option allows user to exit system setup with saving the changes.Press <Enter> on this item to ask for the following confirmation message:Pressing ‘Y’ to store all the present setting values tha user made in this time into CMOS.The...
Page 51 - Exit Discarding Changes
5 1 BIOS Setup Exit Discarding Changes This option allows user to exit system setup without changing anyprevious settings values in CMOS. The previous selection remain in effect.This will exit the Setup Utility and restart your compuetr when selecting this option.
Page 52 - Load Settup Default
5 2 GA-5YXS1-RH/GA-5YXS-RH Motherboard Load Settup Default This option allows user to load default values for all setup items.When you press <Enter> on this item, you will get a confirmation dialog box with a messageas below:
Page 53 - Discard Changes
5 3 BIOS Setup Discard Changes This option allows user to load previos values from CMOS for all setup item.When you press <Enter> on this item, you will get a confirmation dialog box with a messageas below:
Page 54 - Save Changes
5 4 GA-5YXS1-RH/GA-5YXS-RH Motherboard Save Changes This option allows user to save setup dat ato CMOS.When you press <Enter> on this item, you will get a confirmation dialog box with a messageas below: Press [Yes] to save setup daya to CMOS.
