Gigabyte Technology GN-FE605 - Manuals

GN-FE605(M) PCI Adapter User’s Guide 3 FCC part 68 (applicable to products fitted with USA modems) The modem complies with Part 68 of the FCC Rules. On this equipment is a label that contains, among other information, the FCC registration number and Ringer Equivalence Number (REN) for this equipment...

GN-FE605(M) PCI Adapter User’s Guide 4 company cause to request the user to disconnect the equipment. Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines and internal metallic water pipe system, if resent are connected together. T...

GN-FE605(M) PCI Adapter User’s Guide 5 2. Introduction Welcome to the Gigabyte GN-FE605(M) 10/100 Fast Ethernet PCI Adapter User’s Guide. Before start, please check your Ethernet Card is GN-FE605 or FE605M. The user’s guide provides instructions for configuration software for the Gigabyte GN-FE605(M...

GN-FE605(M) PCI Adapter User’s Guide 6 GN-FE605(M) Fast Ethernet PCI Adapter Indicator Description The faceplate on the 10/100 BASE-T NIC provides an RJ-45 connector for connecting the card to another network device. Fast Ethernet Port LED indicator description LED Status Description On 100Mbps Ethe...

GN-FE605(M) PCI Adapter User’s Guide 7 3. Adapter Specifications Feature Value Interfaces 10/100-T Full/Half Duplex MAC Crossover Auto MDI/MDIX (FE605 Support MDI) Controller-Processor VIA-VT6105(M) PCI Bus support PCI 2.2/2.1 Communication Standard IEEE 802.3 10 Base-T Ethernet IEEE 802.3u 100 Base...

GN-FE605(M) PCI Adapter User’s Guide 9 5. Installation Procedures 5.1 Insert the Networking Interface Card Step1. Switch off the computer, unplug the power cord, and remove the computer’s cover. Step2. Select an unused PCI bus-master slot and remove its protective bracket. Step3. Push the Adapter in...

GN-FE605(M) PCI Adapter User’s Guide 10 appropriate to your network operating system. Note: Before installing the networking interface card, make sure your system meets the requirements listed for your operating system. Note: If you are installing a driver in a computer with other existing adapters,...

GN-FE605(M) PCI Adapter User’s Guide 12 (B) Driver Installation For GN-FE605 Windows NT4.0 Step1. Click the Start button, select Setting , and Control Panel . Step2. Double-Click on the “ Network ” icon. The Network dialog will be displayed.

GN-FE605(M) PCI Adapter User’s Guide 13 Step3. In the Network window, click on the “ Adapters ” tab. Click on the Add button. Step4. From the list of network adapters, click on the Have Disk.. button.

GN-FE605(M) PCI Adapter User’s Guide 14 Step5. Insert the supplied driver CD into your CD-ROM. Enter E:\ (where “E” is the CD-ROM drive.) as the driver path and click on the OK button. Step6. The next screen allows you to select a Connection Type. Select the communication rate type and click on the ...

GN-FE605(M) PCI Adapter User’s Guide 15 Step8. Check the “VIA VT6105 Rhine lll Fast Ethernet Adapter” under “ Network Adapters ” and click the Close button. Step9. Storing binding configuration…

GN-FE605(M) PCI Adapter User’s Guide 16 Step10. If the TCP/IP protocol has been installed, the IP address entry screen will appear. Enter the IP address, subnet mask, gateway address and other required values and click on the Apply button. Consult with your network administrator and if required, set...

GN-FE605(M) PCI Adapter User’s Guide 17 Windows 2000/XP Note: For the Windows 2000 and XP are the same driver. For the following instruction is for the Windows 2000. Step1. Set the GN-FE605 to a PCI slot on your PC, and switch on the power of the computer. Step2. The system automatically detects the...

GN-FE605(M) PCI Adapter User’s Guide 18 Step4. Select “Search for a suitable driver for my device” and click on the Next button. Step5. In the next window, you can specify a search location then click on the Next button.

GN-FE605(M) PCI Adapter User’s Guide 19 Step6. The setup wizard reports that a driver for the device has been found. Click on the Next button to initiate driver installation. Step7. After the file copy has completed, the wizard reports that software for the device has been installed. Click on the Fi...

GN-FE605(M) PCI Adapter User’s Guide 20 Windows 95/98/Me Note: For the Windows 95, 98 and Me are the same driver. For the following instruction is for the Windows 98. Step1. Set the GN-FE605 to a PCI slot on your PC, and switch on the power of the computer. Step2. The system automatically detects th...

GN-FE605(M) PCI Adapter User’s Guide 21 Step3. Select “ Search for the best driver for your device ” and click on the Next button. Step4. In the next window, you can specify the location of the driver to be installed. Insert the supplied driver CD into your CD-ROM, and click on the Next button.

GN-FE605(M) PCI Adapter User’s Guide 22 Step5. Click on the Next button. Step6. Windows98 starts copying the files. If it asks for certain files on Windows 98 CD-ROM, insert your Windows98 CD-ROM and specify a path. (If Drive E is your CD-ROM drive, enter e:\win98.)

GN-FE605(M) PCI Adapter User’s Guide 23 Step7. After the file copy has completed, click on the Finish button. Step8. You will be asked to restart the computer. Remove the driver CD from the drive and click on the Yes button to restart the computer. After the driver installation has completed, follow...

GN-FE605(M) PCI Adapter User’s Guide 27 Step8. Check the “VIA VT6105M Rhine lll Fast Ethernet Adapter” under “ Network Adapters ” and click the Close button. Step9. Storing binding configuration…

GN-FE605(M) PCI Adapter User’s Guide 28 Step10. If the TCP/IP protocol has been installed, the IP address entry screen will appear. Enter the IP address, subnet mask, gateway address and other required values and click on the Apply button. Consult with your network administrator and if required, set...

GN-FE605(M) PCI Adapter User’s Guide 30 Step4. Select “ Search for a suitable driver for my device ” and click on the Next button. Step5. In the next window, you can specify a search location then click on the Next button.

GN-FE605(M) PCI Adapter User’s Guide 36 (D) SNMP ONLY FOR GN-FE605M Introduction Network statistics and control information are easily retrieved by using standard SNMP protocol. Network administrator could use MIB browser to get the information from remote host if it is SNMP protocol available. GN-F...

GN-FE605(M) PCI Adapter User’s Guide 40 extension agent. 2. In the folder contains SNMP extension agent package, there are two version of setup program. 3. A Self-Extracting EXE and the VSNMP subfolder contains uncompressed setup program. 4. Double Click on the Self-Extracting EXE or the setup.exe i...

GN-FE605(M) PCI Adapter User’s Guide 41 Install SNMP extension agent from Gigabyte CD You can also install SNMP service directly from the Gigabyte CD. 1. Insert the CD into the CD-ROM drive. The CD autorun program starts. Click FE605M \ Install SNMP Service Driver . 2. The Setup Winzard will be disp...

GN-FE605(M) PCI Adapter User’s Guide 43 5. Click Finish to complete Setup. Remove SNMP extension agent in Windows platform 1. Click Start , point to Settings , and click Control Panel . Double-click Add/Remove Programs. 2. In the list of installed program , choose SNMP . 3. Click Add/Remove button t...

GN-FE605(M) PCI Adapter User’s Guide 44 MIB-II and RMON counter support MIB-II counters Currently, GN-FE605M 10/100Mbps Fast Ethernet PCI Adapter support most of the standard MIB-II counters. The table below lists the MIB-II interface group supported OIDs.

GN-FE605(M) PCI Adapter User’s Guide 45 RMON counters Currently, GN-FE605M 10/100Mbps Fast Ethernet PCI Adapter support some of the standard RMON counters. The table below lists the RMON Ethernet Statistics, History, Alarm and Event group supported OIDs.

GN-FE605(M) PCI Adapter User’s Guide 51 (E) NIC Control Set for GN-FE605(M) Introduction Overview NIC Control Set is a Windows platform application. It provides information, setting, statistics and diagnosis functions for the NIC. Additionally, it provides multiple VLAN function for the management N...

GN-FE605(M) PCI Adapter User’s Guide 53 Fundamental Functions My Computer Display the network information of this computer. In “Network Component” area, all network adapters will be displayed in it. In “Management NIC” area, only NIC with management functions (e.g. FE605M) will be displayed in it. N...

GN-FE605(M) PCI Adapter User’s Guide 54 Service : All network services currently installed in this computer Client : All network clients currently installed in this computer

GN-FE605(M) PCI Adapter User’s Guide 57 About Manufacture contact information. Advanced Management Functions(Only For FE605M) VLAN settings VLAN setting in NIC Control Set only supported in management adapters (e.g. FE605M). Add/Remove VLAN

GN-FE605(M) PCI Adapter User’s Guide 58 Setting for add/remove VLAN User should specify VLAN ID and VLAN name in the dialog box. VLAN01 (VLAN ID = 1) added VLAN01 (VID = 1) will be displayed in VLAN area in NIC Control Set.

GN-FE605(M) PCI Adapter User’s Guide 60 8. Limited Warranty 1-Year Warranty Gigabyte warrants to the original consumer/purchaser that the adapter product free from defects in material and workmanship for no limited time from the original manufactory shipment date. This warranty does not cover the ad...