Genie 1028 Manual - Free PDF Download

Page 2 - INDEX; SAVE THESE INSTRUCTIONS

Safety Information Safety Notifications ................................................. 4 Important Safety Instructions ............................. 5 Features Safety Features ......................................................... 6 Opener Features ................................................

Page 3 - Thank you for purchasing a; Model Number; Please take a moment to preview this manual to ensure that you have; Pay particular attention to all Safety Warnings, Cautions and; Remember, your garage door is the largest and heaviest

3 DO NOT RETURN PRODUCT TO STORE If you require assistance or have any questions, a knowledgeable Genie Service Technician is just a phone call away at: 1-800-35-GENIE (1-800-354-3643) Or visit our website at: www.GenieCompany.com Thank you for purchasing a Genie® brand garage door opener. The leade...

Page 4 - SAFETY NOTIFICATIONS & INSTRUCTIONS; IMPORTANT SAFETY INSTRUCTIONS; IMPORTANTES CONSIGNES DE SéCURITé

4 SAFETY NOTIFICATIONS & INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS OVERVIEW OF POTENTIAL HAZARDS READ THIS SAFETY INFORMATION Garage doors are large, heavy objects that move with the help of springs under high tension and electric motors. Since moving objects, springs under tension, and electri...

Page 5 - WARNING; TO REDUCE THE RISK OF SEVERE INJURY OR; AVERTISSEMENT; POUR RéDUIRE LES RISQUES DE BLESSURES GRAVES VOIRE

5 IMPORTANT INSTALLATION INSTRUCTIONS IMPORTANTES INSTRUCTIONS D’INSTALLATION WARNING ! Opener is equipped with grounded electrical plug for your protection, and only fits grounded electrical outlets. DO NOT alter plug in any way! If your have no grounded outlets, have one installed by a licensed el...

Page 6 - SAFETY & STANDARD FEATURES

6 Safe-T-Beam® (STB) Non-Contact Reversing System Puts an invisible beam across the door opening. The door stops and reverses to the full open position if anything passes through the beam. LED indicator lights on the powerhead and on the STBs provide self-diagnostics if an operational problems exist...

Page 7 - ORIENTATION; OPENER PROGRAMMING

7 NOTE : Before programming the opener, check to make sure there are no objects in the garage door opening. INTRODUCTION Now that the Genie® garage door opener is installed, follow the steps in this manual to program the opener so that the door opens and closes properly and all remote devices operat...

Page 8 - The DOWN limit is now programmed.; Programming DOWN Limit:; Carriage should be locked; PROGRAMMING DOWN TRAVEL LIMIT

8 + PRGM SET + – PRGM SET + – PRGM SET + – + PRGM SET + – PRGM SET + – PRGM SET + – + PRGM SET + – PRGM SET + – PRGM SET + – + PRGM SET + – PRGM SET + – PRGM SET + – + PRGM SET + – PRGM SET + – PRGM SET + – WARNING ! • Make sure doorway is in full view and clear of obstacles and people to avoid inju...

Page 9 - PROGRAMMING UP TRAVEL LIMIT; The UP limit is now programmed.; Programming UP Limit:

9 + PRGM SET + – PRGM SET + – PRGM SET + – + PRGM SET + – PRGM SET + – PRGM SET + – PROGRAMMING UP TRAVEL LIMIT Steady Blue HOLD UNTIL LED Lights Flashing Blue RELEASE 1-2. Enter Programming Mode 3. Adjust Door Position 4. Lock Programming 1. Press and hold the UP arrow button. • Long LED will light...

Page 10 - Contact Reverse Adjustment; PROGRAMMING FORCE AND CONTACT REVERSE

10 Force Control The force controls are automatically set when the wall control is used for the first time with garage door opener. The door MUST complete one full cycle, from full open to full close and then, full close to full open, before the settings are automatically recorded. Contact Reverse T...

Page 11 - PROGRAMMING ADDITIONAL REMOTE CONTROLS; THE REMOTE CONTROLS INCLUDED WITH

11 + PRGM SET + – PRGM SET + – PRGM SET + – + PRGM SET + – PRGM SET + – PRGM SET + – + PRGM SET + – PRGM SET + – PRGM SET + – NOTE : The following instructions are for remote control transmitters purchased separately in addition to those provided with this opener, but can also be used if any remote(...

Page 12 - read and follow all instructions.; lire et comprendre toutes les

12 WARNING To reduce the risk of severe injury or death, read and follow all instructions. 1. NEVER let children operate or play with the door controls. 2. Keep remote away from children. 3. ALWAYS keep the moving door in sight and away from people and objects until door is completely closed. NO ONE...

Page 13 - MAINTENANCE & ADJUSTMENTS; DOOR

13 L’utilisation d’une autre commande murale pourrait produire des résultats inattendus de la porte ainsi que le dysfonctionnement de l’éclairage. Localisez la console murale en vue de la porte et suffisamment loin de la porte pour éviter tout contact pendant l’utilisation de la console. La commande...

Page 17 - Need help or have questions? DO NOT RETURN to the store.; TROUBLESHOOTING

17 Visit www.genicompany.com or call Customer Service at 1-800-35-GENIE. Need help or have questions? DO NOT RETURN to the store. PROBLEM: WHAT TO DO: Opener does NOT operate when wall control is pressed. • Turn Sure-Lock™ OFF See page 6. • Check power source. – Plug a lamp into outlet used for powe...

Page 19 - CLEARING MEMORY OF REMOTES; OPTIONAL PROGRAMMING & ACCESSORIES

19 + PRGM SET + – PRGM SET + – PRGM SET + – + PRGM SET + – PRGM SET + – PRGM SET + – + PRGM SET + – PRGM SET + – PRGM SET + – + PRGM SET + – PRGM SET + – PRGM SET + – CLEARING MEMORY OF REMOTES NOTE : Clearing memory of remotes from the powerhead will clear ALL programmed remotes, wireless keypads a...

Page 20 - Programming HomeLink® System; VEHICLE PROGRAMMING

20 + PRGM SET + – PRGM SET + – PRGM SET + – B. Press the chosen HomeLink button for two seconds and release. Press that same button again for two seconds and release. The long LED will flash blue and then turn off. C. Press the HomeLink button a few more times until door moves. NOTE : For additional...

Page 21 - WIRELESS KEYPAD PROGRAMMING

21 WIRELESS KEYPAD PROGRAMMING Keypad Overview: Tip: Program Keypad before mounting. Activate keypad by opening battery compartment and pull protective tab. Reinstall compartment door to begin programming. TAB Program the keypad for the first time* with a Personal Identification Number (PIN). This P...

Page 23 - THIS PAGE INTENTIONALLY BLANK

Page 24 - RAIL PARTS

24 RAIL PARTS Item Part Number Description QTY. 1 36728A.S Head To Rail Bracket (Need 2 for Chain, 1 for Belt) 1 1A 36987A.S Head To Rail Bracket Belt Guard (for Belt only) 1 2 37857R.S Tensioner Assembly 1 3 36764A.S Pulley Tensioner 1 4 37557R.S Chain Bullet Assembly 1 37556R.S Belt Bullet Assembl...

Page 25 - POWERHEAD

25 NOTE: The following kits will include all necessary harnesses, and/or hardware required for reassembly and detailed assembly instructions. Motor Assemblies PCB DC Controllers Light Sockets Idler Pulley Assembly Transformer Assembly Chain & Belt Kits Covers POWERHEAD Item # Part Number Descrip...

Page 26 - DASMA INFORMATION; IMPORTANT; Garage Door System Safety-

26 DASMA INFORMATION 8 IMPORTANT INFORMATION Automatic Garage Door Opener and Garage Door Safety and Maintenance Guide Garage Door System Safety- An Automatic Decision A garage door is the largest moving object in the home. They are often operated by electric door open- ers. Proper installation, ope...

Page 29 - Garage Door Opener Safety-; Balance Position

29 Lubrication Regularly lubricate the moving parts of the door. However, do not lubricate plastic parts such as plastic rollers and plastic idler bearing. Consult the door owner’s manual for the manufacturer’s recommendation. Door Balance Periodically test the balance of your door. • Start with the...