GE ZIDI240 - Manual
GE ZIDI240 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Safety Information; IMPORTANT; Note to Installer; WARNING; Skill Level –; IMPORTANT –
- Page 3 – CONTENTS; Important Information; PARTS REQUIRED; TOOLS REQUIRED
- Page 4 – Design Guide; THE INSTALLATION SPACE; PRODUCT CLEARANCES; Stainless Steel Models Only; FOR MODEL ZIDS240 WITH STAINLESS STEEL DRAWERS AND HANDLES
- Page 5 – FOR MODEL ZIDI240 WITH CUSTOM DRAWER PANELS AND HANDLES; Custom Panel Models Only
- Page 6 – STEP 1 REMOVE PACKAGING; STEP 2 INSTALL CUSTOM 3/4; Installation Instructions
- Page 7 – STEP 3 LEVEL
- Page 8 – STEP 5 SLIDE PRODUCT INTO; STEP 4 CONNECT POWER
Design Guide with
Installation
Instructions
Double-Drawer Built-In Refrigerator
ZIDI240
ZIDS240
monogram.com
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Was this manual helpful?
About this manual
- Brand
- GE
- Model
- ZIDI240
- Document type
- Manual
- Language(s)
- English
- Pages
- 8
- File size
- 239.1 KB
- Format
Summary
Safety Information 2 BEFORE YOU BEGIN: Read these instructions completely and carefully. IMPORTANT – Save these instructions for local inspector ’s use. IMPORTANT – Observe all governing codes and ordinances. Note to Installer – Be sure to leave these instructions with the Consumer. Note to Consumer...
3 CONTENTS Important Information Tools, Hardware ........................................3Parts Required ..............................................3Caring for Your Stainless Steel ............3 Design Guide (for ZIDS240) The Installation Space ..............................4Product Clearances......
Design Guide 4 THE INSTALLATION SPACE IMPORTANT: Double-Drawer Refrigerators aredesigned to be built-in only. They cannot be used free-standing. The cutout depth should be 24 ″ NOTE: The unit is designed to be flush with the surrounding cabinets. Additional Specifications • A 120 volt 60Hz., 15 or 2...
