GE PHP960SM - User Manual

GE PHP960SM – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

Loading the manual

For answers to your Monogram,

GE Profile

™

appliance questions, visit our website at

ge.com or call GE Answer Center

service,

800.626.2000.

220578

†

Note:

Check local codes for required breaker size

Important:

Requires a 5" free area between

the bottom of the cooktop to any combustible
material, i.e., shelving. Free area not required
when installing wall oven underneath cooktop.
Refer to installation instructions. Requires a
15" minimum from cooktop to adjacent
overhead cabinets. Units are furnished with
a 36" flexible armored cable.

Note:

36" Ribbon cooktops are approved for use over GE 30" Single Wall

Ovens and Warming Drawers only. Refer to cooktop and wall oven/
warming drawer installation instructions packed with product for current
dimensional data. If installed with a GE Profile

™

Telescopic Downdraft System,

consult both the cooktop and downdraft installation instructions packed with
product before installing. Cooktop gas/electric supply may need to be
re-routed to install downdraft. The countertop must be at least 26" deep
with a flat surface area of 23-1/2" or more, front to back. In addition,
other clearances to the front edge of the countertop must be considered,
especially on raised bullnose countertops. Consult cabinet and countertop
manufacturer’s specs for flush mount installation prior to install.

Installation Information:

Before installing, consult installation instructions

packed with product for current dimensional data.

KW Rating

240V

8.6

208V

6.5

Breaker Size

240V

50 Amps

†

208V

50 Amps

†

Listed by

Underwriters

Laboratories

3-1/4*

Cooktop

2-1/2**

Required

33-7/8

19-1/8

36-1/8

36_ss_cktp_install.eps

Electrical junction box 16" MIN.

below countertop

30" MIN. to

unprotected

cabinet

Cut should

not interfere

with cabinet

structure

at front

2" MIN.

clearance to

side wall

from cut-out

2" MIN.

clearance to

side wall

from cut-out

1-3/4" to

rear wall

13" MAX.

depth

* Depth of unit at conduit connection location (rear) is

6-1/2" on models PP980/950 and 4-5/8" on models

PHP960/PP975/972/962/945/942/932/912,

JP655/356/346.

**Raised bull nose countertops may require up to

3/8" additional clearance to prevent interference

with curved front.

15" MIN.

to cabinet

PHP960SM

GE Profile

™

36" Electric Induction Cooktop

Dimensions and Installation Information (in inches)

Specification Revised 9/07

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.