GE KTC-217CV3, KTC-217CV9, KTC-247CEV3, KTC-247CEV9 Manual

© 2003 Kalatel, a GE Interlogix company All Rights Reserved. Any GE Interlogix, Kalatel division, software supplied with GE Interlogix, Kalatel division, products is proprietary and furnished under license and can be used or copied only in accordance with the terms of such license. This document con...

Page 3 - DIP S; E Z

KTC-117/217/247 User Manual Table of Contents 1041075C / November 2003 3 T ABLE OF C ONTENTS B EFORE Y OU B EGIN ............................................................... 4 1 I NTRODUCTION ................................................................. 5 2 C AMERA B ACK P ANEL .................

Page 4 - Before You Begin; EFORE; A basic knowledge of CCTV systems and components; Customer Support; Improper use of this equipment can cause equipment damage.

Before You Begin KTC-117/217/247 User Manual 4 1041075C / November 2003 B EFORE Y OU B EGIN Read these instructions before installing or operating this product. Note: This installation should be made by a qualified service person and should conform to local codes. This manual provides installation a...

Page 5 - Introduction; NTRODUCTION; See Table 1 for the camera models and their descriptions.

KTC-117/217/247 User Manual Introduction 1041075C / November 2003 5 1 I NTRODUCTION The KTC-117/217/247 cameras come in an all-in-one package that includes the components shown in Figure 1. 24 VAC Camera Mounting hardware and BNC connectors Mounting bracket Power supply unit Figure 1. Package conten...

Page 6 - Camera Back Panel; AMERA; DIP switch

Camera Back Panel KTC-117/217/247 User Manual 6 1041075C / November 2003 2 C AMERA B ACK P ANEL See Figure 2 when performing the camera setup and adjustment procedures. DIP switch Direct drive auto iris level adjuster Terminal block Power LED Video out Figure 2. Camera back panel

Page 7 - Programming the DIP Switch; ROGRAMMING THE; WITCH; Note: This switch is not available for the KTC-217 or KTC-247 cameras

KTC-117/217/247 User Manual Programming the DIP Switch 1041075C / November 2003 7 3 P ROGRAMMING THE DIP S WITCH To program the DIP switch (Figure 2), refer to Figure 3 or Figure 4 depending on your camera model. Backlight compensation off/on Flickerless off/on Normal view / mirror view (flips pictu...

Page 8 - Note: This switch is not available for the KTC-117 cameras

Programming the DIP Switch KTC-117/217/247 User Manual 8 1041075C / November 2003 3.3 W HITE B ALANCE (ATW OR FIX) Note: This switch is not available for the KTC-117 cameras • Auto-tracking white balance (ATW) mode In the ATW mode, the range of colors in the scene being monitored is tracked continuo...

Page 9 - Installing the Bracket and Camera; NSTALLING THE

KTC-117/217/247 User Manual Installing the Bracket and Camera 1041075C / November 2003 9 4 I NSTALLING THE B RACKET AND C AMERA You can mount the camera on a vertical surface (Figure 5), and below (Figure 6) or above (Figure 7) a horizontal surface. Figure 5. Mounting on a vertical surface Figure 6....

Page 10 - ) Unscrew the mounting plate

Installing the Bracket and Camera KTC-117/217/247 User Manual 10 1041075C / November 2003 4.1 M OUNTING THE B RACKET 1) Unscrew the mounting plate (Figure 8) from the rest of the bracket. 2) Place the mounting plate against the vertical or horizontal mounting surface and mark the location of the thr...

Page 11 - TTACHING THE; ) Turn the wing nut (Figure 8) on the bracket counterclockwise to

KTC-117/217/247 User Manual Installing the Bracket and Camera 1041075C / November 2003 11 4.2 A TTACHING THE C AMERA TO THE B RACKET 1) Turn the wing nut (Figure 8) on the bracket counterclockwise to free the ball and socket bolt (Figure 8). See Figure 11. 2) Screw the ball and socket bolt into the ...

Page 12 - DJUSTING THE; ) Swivel the camera on the ball and socket bolt to adjust the camera

Installing the Bracket and Camera KTC-117/217/247 User Manual 12 1041075C / November 2003 4.3 A DJUSTING THE C AMERA A NGLE 1) If necessary, turn the wing nut (Figure 8) on the bracket counterclockwise to free the ball and socket bolt (Figure 8). See Figure 11. 2) Swivel the camera on the ball and s...

Page 13 - Making Cable Connections; AKING; See Figure 15 and perform the following.; ) Attach the provided BNC connectors to the ends of the video cable.; power source

KTC-117/217/247 User Manual Making Cable Connections 1041075C / November 2003 13 5 M AKING C ABLE C ONNECTIONS Note: This camera is 24 VAC only. See Figure 15 and perform the following. 1) Attach the provided BNC connectors to the ends of the video cable. 2) Connect the video cable to the monitor’s ...

Page 14 - ) Loosen the ~AC24V terminal connectors on the terminal block and; connect the power cable to them.; ) Connect the other end of the power cable to the power supply unit; and tighten the connector screws until snug.

Making Cable Connections KTC Compact Cameras 14 1041075C / November 2003 4) Loosen the ~AC24V terminal connectors on the terminal block and connect the power cable to them. 5) Tighten the terminal connector screws until snug, ensuring that the power leads are secure. 6) Connect the other end of the ...

Page 15 - Making Camera Adjustments; PENING THE; Grip; ) Hold the camera with your fingers on the bottom of the camera and; your thumb on the grip strips on top of the door.; ) Press down on the door with your thumb to unlock it from the

KTC-117/217/247 User Manual Making Camera Adjustments 1041075C / November 2003 15 6 M AKING C AMERA A DJUSTMENTS To open the housing see section 6.1. To adjust the camera focus see section 6.2. To make direct drive auto iris level adjustments see section 6.3. 6.1 O PENING THE H OUSING See Figure 16 ...

Page 16 - See Figure 18 and perform the following.; ) Turn the zoom ring to set the desired zoom.

Making Camera Adjustments KTC-117/217/247 User Manual 16 1041075C / November 2003 6.2 A DJUSTING THE C AMERA Z OOM AND F OCUS See Figure 18 and perform the following. Zoom ring thumbscrew Focus ring thumbscrew Figure 18. Adjusting the camera focus 1) Loosen the zoom ring thumbscrew. 2) Turn the zoom...