GE JV935 User Manual - Free PDF Download

Page 2 - TO REDUCE THE RISK OF FIRE,; For general ventilating use only.; CAUTION –; To reduce risk of fire and to; WARNING –; TO REDUCE THE RISK OF; Consumer Support

SAFETY PRECAUTIONS IMPORTANT SAFETY INFORMATION.READ ALL INSTRUCTIONS BEFORE USING. WARNING – TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY TO PERSONS,OBSERVE THE FOLLOWING: A. Use this unit only in the manner intended by the manufacturer. If you have questions,contact the manufacturer. B. Be...

Page 3 - READ AND FOLLOW THIS SAFETY INFORMATION CAREFULLY.; ON; when cooking on high

Consumer Support Tr oubleshooting T ips Operating Instructions Safety Instructions Care and Cleaning READ AND FOLLOW THIS SAFETY INFORMATION CAREFULLY. READ AND SAVE THESE INSTRUCTIONS SAFETY PRECAUTIONS ge.com WARNING – TO REDUCE THE RISK OF A RANGE TOP GREASE FIRE: A. Never leave surface units una...

Page 4 - Using the hood controls.; FAN Control; LIGHT Control

Using the hood controls. Throughout this manual, features and appearance may vary from your model. FAN Control Turn the FAN speed control to LO, MED LO, MED HI or HI, as needed. Continuous use of the fan system while cooking helps keep the kitchen comfortable and lesshumid. It also reduces cooking o...

Page 5 - Care and cleaning of the vent hood.; Reusable Metal Grease Filters; Stainless Steel Surfaces

Care and cleaning of the vent hood. ge.com Be sure electrical power is off and all surfaces are cool before cleaning or servicing any part of the vent hood. The hood has 2 metal reusablegrease filters. The metal filters trap greasereleased by foods on the cooktop.They also help prevent flamingfoods ...

Page 6 - Hood Lights; The glass cover should be removed; CAUTION; Before replacing your

Consumer Support Tr oubleshooting T ips Operating Instructions Safety Instructions Care and Cleaning 6 Care and cleaning of the vent hood. Be sure electrical power is off and all surfaces are cool before cleaning or servicing any part of the vent hood. Hood Lights NOTE: The glass cover should be rem...

Page 7 - or; Visit our Website at:; Range Hoods; PRODUCT DIMENSIONS; BEFORE YOU BEGIN; Read these instructions completely and carefully.; IMPORTANT; Note to Installer; TWO PEOPLE ARE REQUIRED FOR

Questions? Call 800.GE.CARES (800.432.2737) or Visit our Website at: www.GEAppliances.com InstallationInstructions Range Hoods PRODUCT DIMENSIONS BEFORE YOU BEGIN Read these instructions completely and carefully. • IMPORTANT – Save these instructions for local inspector’s use. • IMPORTANT – Obser ve...

Page 8 - Installation Instructions; OPTIONAL ACCESSORIES

Installation Instructions OPTIONAL ACCESSORIES Duct Cover A Decorative duct cover is available to accommodate8 to 10 ft. ceiling heights. The duct cover will expandfrom 12 Min. or 24 to 34 Max. height. • The duct cover conceals the ductwork running from the top of the hood to the ceiling. • The duct...

Page 9 - ADVANCE PLANNING; Ductwork Planning; DUCT FITTINGS; Electrical supply; MAXIMUM DUCT LENGTH: 7; DECORATIVE DUCT COVERS

Installation Instructions 9 ADVANCE PLANNING Ductwork Planning • This hood may be vented vertically through upper cabinets, soffit or ceiling. A duct transition piece issupplied for vertical exhaust. Use locally suppliedelbows to vent horizontally through the rear wall.See page 13. • Determine the e...

Page 10 - Kit – JXDW1

10 Installation Instructions DUCT FITTINGS Total Equivalent Quantity Equivalent Duct Piece Dimensions Length* Used Length 7 ″ Round, 1 ft. straight (per footlength) 3 -1 ⁄ 4 ″ x 12 ″ 1 ft. straight (per footlength) 7 ″ 90 ° elbow 14 ft. 7 ″ 45 ° elbow 9 ft. 3 -1 ⁄ 4 ″ x 12 ″ 90 ° elbow 15 ft. 3 -1 ⁄...

Page 11 - Do not lift; REMOVE THE PACKAGING; Set aside wood

Installation Instructions 11 TOOLS AND MATERIALSREQUIRED (NOT SUPPLIED) Pencil and tape measure Spirit level Phillips and Flat blade screwdrivers Duct tape Electric drill with 1/8 and 3/8 bits 1/4 pivoting hex socket Safety glasses Flashlight Saber saw or Key Hole Saw Metal Snips Hammer Pliers Addit...

Page 12 - PARTS PROVIDED; Duct Cover Accessory:

12 Installation Instructions PARTS PROVIDED Locate the hardware accessory box packed with thehood and check contents. 2 Aluminum Grease Filters Duct Transition with Damper Filter Support Screws, wall fasteners, washers DUCT COVER REQUIREMENTS We recommend that the vent hood and decorativeduct cover ...

Page 13 - Venting through a soffit or upper cabinet.; DETERMINE HOOD, DUCTWORK AND WIRING LOCATIONS; FOR DUCTING THROUGH REAR WALL:; House Wiring Location:; To route house wiring through the ceiling or soffit:

Centerline8" Min. AboveTop of Hood 6-7/8"Centerline To Wall FOR WALL VENT DUCT FOR CEILINGVENT DUCTING 7-1/2" Dia. Hole Top of Hood Bottom of Hood 18" 15-3/8" Wood Support Electrical Electrical • Measure desired distance from the bottom of the hood to the cooking surface, 24 min....

Page 14 - INSTALL HOOD SUPPORT; Drill Bottom Mounting Hole Locations

13-1/16" 1/4" Gap Installation Instructions 14 1 INSTALL HOOD SUPPORT IMPORTANT: Framing must be capable ofsupporting 100 lbs. • Locate at least 2 vertical studs at the wood mounting location by tapping drywall with a hammer or use astud finder. • Center the supplied wood horizontal support,...

Page 15 - Alternate Mounting Method

B A A 15 Installation Instructions IMPORTANT: For additional support and to minimizevibration during operation, we strongly recommendthat the hood also be secured to the back wall withwall fasteners. 4 Alternate Mounting Method INSTALL HOOD TO SOFFITOR BENEATH CABINETS SKIP THIS STEP IF USING WALL M...

Page 16 - INSTALL CEILING BRACKET

Installation Instructions 16 5 INSTALL CEILING BRACKET The ceiling bracket must be installed when the ductcover is used to span 24 or more height above the hood. The bracket will hold the decorative duct coverin place at the top. Note: The ceiling bracket is not required when using only the 12 secti...

Page 17 - INSTALL MOTOR; To install the 12 duct cover alone:; CONNECT ELECTRICAL; Verify that power is turned off at the source.; 0 INSTALL FILTER SUPPORT

17 Installation Instructions 7 INSTALL MOTOR 9 INSTALL DUCT COVERS To install the 12 duct cover alone: • Place the 12 section of the decorative duct cover on top of the hood. • Secure the cover to the top of the hood with 4 screws provided. To install the 2-piece duct cover: • Place the 2-piece duct...

Page 18 - 1 INSTALL FILTERS; 3 FINALIZE INSTALLATION

18 Installation Instructions 11 INSTALL FILTERS • Remove protective film covering the filters.• Insert the filter into the “C” clips mounted to the top of the vertical front panel. • Tap the filter against one side to align with outside opening. • Pull the filter down into the lower slots at the bot...

Page 20 - Before you call for service...; Problem; A fuse may be blown or a; circuit breaker tripped.; Excessively soiled filters.

20 Before you call for service… Consumer Support Tr oubleshooting T ips Operating Instructions Safety Instructions Care and Cleaning Troubleshooting Tips Save time and money! Review the charts on the followingpages first and you may not need to call for service. Problem Possible Causes What To Do Fa...

Page 21 - General Electric Company; GE Ser vice Protection Plus; —comprehensive protection on all your appliances—; No Matter What Brand!; Please place in envelope and mail to:

21 General Electric Company Warranty Registration DepartmentP.O. Box 32150Louisville, KY 40232-2150 GE Ser vice Protection Plus ™ GE, a name recognized worldwide for quality and dependability, offers you Service Protection Plus ™ —comprehensive protection on all your appliances— No Matter What Brand...

Page 22 - Consumer Product Ownership Registration; Important: If you did not get a registration card with your; Model Number; GE Consumer & Industrial

22 Consumer Product Ownership Registration Impor tant Mail Today! First Name Mr. ■ ■ Ms. ■ ■ Mrs. ■ ■ Miss ■ ■ Street Address City State Date Placed In Use Month Day Year Zip Code Apt. # Last Name Phone Number _ _ Consumer Product Ownership Registration Dear Customer:Thank you for purchasing our pro...

Page 23 - GE Range Hood Warranty.; Improper installation, delivery or maintenance.; What GE Will Not Cover:

GE Range Hood Warranty. For The Period Of: GE Will Replace: One Year Any part of the range hood which fails due to a defect in materials or workmanship. From the date of the During this limited one-year warranty, GE will also provide, free of charge, all labor and original purchase in-home service t...

Page 24 - Register Your Appliance; Register your new appliance on-line—at your convenience!

Register Your Appliance ge.com Register your new appliance on-line—at your convenience! Timely product registration will allow for enhanced communication and prompt service under the terms of your warranty, should the need arise. You may also mail in the pre-printed registration card included in the...