GE JV535, JV536, JV565, JV566, JV635, JV636, JV665, JV666 Manual

Page 2 - READ THIS MANUAL; Write the model and serial numbers here:; Staple sales slip or cancelled check here.; IF YOU NEED SERVICE; Two easy ways to register your appliance!

2 Operating Instructions Safety Instructions Customer Service Installation Instructions Inside you will find many helpful hints on how to use and maintain your range hood properly.Just a little preventive care on your part can save you a great deal of time and money over thelife of your range hood. ...

Page 3 - READ AND FOLLOW THIS SAFETY INFORMATION CAREFULLY.; READ AND SAVE THESE INSTRUCTIONS; SAFETY PRECAUTIONS; Installation Instructions; For general ventilating use only.; ON

READ AND FOLLOW THIS SAFETY INFORMATION CAREFULLY. READ AND SAVE THESE INSTRUCTIONS SAFETY PRECAUTIONS 3 Installation Instructions Customer Service Safety Instructions Operating Instructions IMPORTANT SAFETY INFORMATION.READ ALL INSTRUCTIONS BEFORE USING. WARNING – TO REDUCE THE RISK OF FIRE, ELECTR...

Page 4 - Using the hood controls.; FAN Control; Care and cleaning of the vent hood.; Reusable Metal Grease Filters

4 Operating Instructions Safety Instructions Customer Service Installation Instructions Using the hood controls. Throughout this manual, features and appearance may vary from your model. FAN Control Turn or press (according to your model) the FAN speed control to LO , MED , HI or BOOST , as needed. ...

Page 5 - Painted Surfaces; Hood Lights

5 Installation Instructions Customer Service Safety Instructions Operating Instructions To clean the hood surface, use a hot,damp cloth with a mild detergentsuitable for painted surfaces. Use a clean, hot, damp cloth to removesoap. Dry with a dry, clean cloth. Do not use steel-wool pads or otherabra...

Page 6 - BEFORE YOU BEGIN; Installation; IMPORTANT –; Note to Installer –; Maximum duct length:; DUCTWORK REQUIREMENTS; WARNING –

BEFORE YOU BEGIN 6 Installation Range Hood Instructions Models JV535 JV635 JV536 JV636 JV565 JV665 JV566 JV666 Read these instructions completely and carefully. • IMPORTANT – Save these instructions for local inspector’s use. • IMPORTANT – Observe all governing codes and ordinances. • Note to Instal...

Page 7 - Equivalent Length in Feet

7 DUCTING CHART–JV5 Series Models DUCTING CHART–JV6 Series Models Equivalent Length in Feet 0 25 50 75 100 125 150 3 1 ⁄ 4 ″ x 10 ″ Rectangular Transition to 6 ″ Round = 4.5 ft. 7 ″ Round 90° Elbow = 8 ft. 7 ″ Roof Cap = 30 ft. 250 200 150 100 Air V olume in CFM 3 1 ⁄ 4 ″ x 10 ″ Rectangular 7 ″ Roun...

Page 8 - WORKSHEET – CALCULATE TOTAL EQUIVALENT DUCTWORK LENGTH

DUCT EQUIVALENT NUMBER PIECES LENGTH x USED = TOTAL 3 1 ⁄ 4 ″ x 10 ″ 1 Ft. x ( ) = Ft. Rect., straight 7 ″ Round, 1 Ft. x ( ) = Ft. straight 6 ″ Round, 1 Ft. x ( ) = Ft. straight 3 1 ⁄ 4 ″ x 10 ″ 8.5 Ft. x ( ) = Ft. Rect. 90°elbow 3 1 ⁄ 4 ″ x 10 ″ 7 Ft. x ( ) = Ft. Rect. 45°elbow 3 1 ⁄ 4 ″ x 10 ″ 24...

Page 9 - DAMAGE – SHIPMENT/INSTALLATION; TOOLS YOU WILL NEED

PART QUANTITY Metal Grease Filters 2 Mounting Screws 4 Exhaust Adaptor 1 (for 3 1 ⁄ 4 ″ x 10 ″ rect. venting) Exhaust Adaptor Screws 2 Exhaust Adaptor 1 (for 7” round venting) 9 • If the unit is damaged in shipment, return the unit to the store in which it was bought for repair or replacement. • If ...

Page 10 - CHOOSE VENT OPTION

10 Outside top exhaust(Vertical duct–3 1 ⁄ 4 ″ x 10 ″ Rectangular) Outside rear exhaust (Horizontal duct–3 1 ⁄ 4 ″ x 10 ″ Rectangular) Outside top exhaust(Vertical duct–7 ″ Round) A C B CHOOSE VENT OPTION The outside vent exhaust option that your installationrequires will determine the hood knockout...

Page 12 - RECTANGULAR

12 REMOVE DUCT KNOCKOUT(S) If recirculating , non-vented ductless (optional for JV5 Series models only), see note below and skip to Step 11 D and proceed . We do not recommend the recirculated configuration for JV6 Series models. Using a flat blade screwdriver, remove the appropriate duct knockout(s...

Page 13 - MARK HOLES; A.Outside top exhaust; CUT HOLES; SCREW IN PARTWAY; C. Outside rear exhaust

13 MARK HOLES Select the vent option that your installation willrequire and proceed to that section: Hood mounting screws (4) 13 15 ⁄ 16 ″ (30 ″ hood) 16 15 ⁄ 16 ″ (36 ″ hood) 13 15 ⁄ 16 ″ (30 ″ hood) 16 15 ⁄ 16 ″ (36 ″ hood) Cabinet front Center line Electrical access hole (in cabinet bottom) Wood ...

Page 14 - TROUBLESHOOTING CHECKLIST

TROUBLESHOOTING CHECKLIST If the hood seems to be operating at high speed whenthe control is not set on high, or if ventilation seemsinadequate, check the following: ❏ Knockouts not removed from hood. ❏ Damper blade not opening. ❏ Reduced airflow because the duct is too small or theduct length is to...

Page 15 - GE Range Hood Warranty.; What GE Will Not Cover:

15 GE Range Hood Warranty. All warranty service provided by our Factory Service Centersor an authorized Customer Care ® technician. For service, call 800-GE-CARES. For The Period Of: GE Will Replace: One Year Any part of the range hood which fails due to a defect in materials or workmanship. From th...

Page 16 - Service Telephone Numbers.

16 Operating Instructions Safety Instructions Customer Service Installation Instructions Service Telephone Numbers. GE Answer Center ® 800.626.2000 The GE Answer Center ® is open 24 hours a day, 7 days a week. OR Visit our Website at: www.geappliances.com In-Home Repair Service 800-GE-CARES (800-432...