GE GDT225SSL0SS - Installation Manual

GE GDT225SSL0SS

GE GDT225SSL0SS – Installation Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
22 Page 22
23 Page 23
24 Page 24
25 Page 25
26 Page 26
27 Page 27
28 Page 28
29 Page 29
30 Page 30
31 Page 31
32 Page 32
33 Page 33
34 Page 34
35 Page 35
36 Page 36
Page: / 36

Table of Contents:

  • Page 2 – For New Installations Only:; MATERIALS YOU WILL NEED:; opposite end sized to fit water supply); Materials For New Installations Only:; Installation Preparation
  • Page 3 – DETERMINE DRAIN METHOD; If the answer to either question is YES, Method 1; CABINET PREPARATION; PREPARE DISHWASHER; IMPORTANT –; Method 1 – Air Gap with Waste Tee or Disposer; Always be sure disposer drain plug has been removed; WARNING; Method 2 – “High Drain Loop” with Waste Tee or Disposer
  • Page 4 – Cabinet Preparation & Wire Routing; Electrical Connection to Dishwasher; PREPARE ELECTRICAL WIRING; Electrical Requirements
  • Page 5 – WATER LINE CONNECTION; PREPARE HOT WATER LINE; PREPARATION; Locate the items in the installation packages:; Turn page to begin dishwasher installation.
  • Page 6 – REMOVE TOEKICK; Dishwasher Installation; STEP 2 ADJUST LEVELING LEGS; CAUTION
  • Page 7 – Position utility lines so they do not interfere with
  • Page 8 – CONNECT DRAIN LINE
  • Page 9 – POSITION DISHWASHER
  • Page 10 – CONNECT POWER SUPPLY; If a power cord with plug is already installed; Front; CONNECT WATER
  • Page 11 – IMPORTANT
  • Page 12 – DISHWASHER WET TEST; CHECK THE FOLLOWING
  • Page 13 – Directives d’installation; Lave-vaisselle encastré; VEUILLEZ LIRE ATTENTIVEMENT; POUR VOTRE SÉCURITÉ; AVERTISSEMENT
  • Page 14 – MATÉRIAUX NÉCESSAIRES:; Pour une nouvelle installation:; PIÈCES FOURNIES DANS; Préparation pour l’installation
  • Page 15 – EXIGENCES RELATIVES AU; CHOIX DE LA MÉTHODE DE VIDANGE; Si vous répondez OUI à l’une ou l’autre de ces; PRÉPARATION DES ARMOIRES; Pour réduire les risques de choc électrique, d’incendie
  • Page 17 – PRÉPARATION DE L’ALIMENTATION; PRÉPARATION; Prenez les pièces fournies dans l’emballage et mettez-
  • Page 18 – Installation du lave-vaisselle; INSTALLATION DU CORDON; Sautez cette étape si le lave-vaisselle est branché de; ATTENTION
  • Page 19 – LE BOYAU DE VIDANGE NE DOIT PAS ÊTRE; INSTALLATION DU COUDE; Conseil: Pour éviter des frais de réparation inutiles pour
  • Page 20 – Méthode n° 1 – Coupure anti-refoulement avec
  • Page 21 – OPTION DE MONTAGE SUR LES CÔTÉS
  • Page 22 – Si un cordon d’alimentation pourvu d’une fiche est; Vue de; Si vous décidez de faire le raccordement avec un
  • Page 25 – Instrucciones de Instalación; Lavavajillas Incorporado; LEA DETENIDAMENTE; PARA SU SEGURIDAD; ADVERTENCIA
  • Page 26 – HERRAMIENTAS NECESARIAS:; Sólo para Instalaciones Nuevas:; MATERIALES NECESARIAS:; Materiales Necesarios para Instalaciones; Preparación de la Instalación; • Aislante del zócalo
  • Page 27 – REQUISITOS PARA EL DESAGÜE; DETERMINE EL MÉTODO DE DESAGÜE; Si la respuesta a cualquiera de estas preguntas; PREPARACIÓN DEL GABINETE; IMPORTANTE –; Método 1 – Brecha de aire con T de desechos o; Consejo: Evite costos innecesarios de llamadas al; PREPARE EL AMURADO DEL
  • Page 28 – PREPARE
  • Page 29 – CONEXIÓN DE LA LÍNEA DE AGUA; PREPARACIÓN DE LA LÍNEA DE AGUA CALIENTE; PREPARACIÓN
  • Page 30 – Instalación del Lavavajillas; PRECAUCIÓN
  • Page 31 – LA LONGITUD TOTAL DE LA MANGUERA DE
  • Page 32 – CONECTE LA LÍNEA DE; Método 1 – Brecha de aire con T de desechos o el; Retire el; PASO 8; Montaje Superior para los Modelos de 18” Únicamente
  • Page 33 – OPCIÓN DE MONTAJE LATERAL
  • Page 34 – ODPHVDGDD¿QGHHYLWDUOD; Vista
  • Page 35 – IMPORTANTE
  • Page 36 – HYLVHHVWDOLVWDOXHJRGHLQVWDODUHOODYDYDMLOODVD¿Q
Loading the manual

Installation Instructions

Built-In Dishwasher

If you have questions, call GE Appliances at 800.GE.CARES (800.432.2737) or visit our website
at: GEAppliances.com. In Canada, please call 800.561.3344 or visit www.geappliances.ca

READ CAREFULLY

KEEP THESE INSTRUCTIONS

31-31590 03-18 GEA

FOR YOUR SAFETY

Read and observe all WARNINGS and CAUTIONS
shown throughout these instructions.
While performing installations described in this
booklet, gloves and safety glasses or goggles
should be worn.
IMPORTANT –

Observe all governing codes and

ordinances.
•

Note to Installer

– Be sure to leave these instructions

for the consumer’s and local inspector’s use.

•

Note to Consumer

– Keep these instructions with

your Owner’s Manual for future reference.

•

Skill Level

– Installation of this dishwasher requires

basic mechanical, electrical and plumbing skills.

Proper installation is the responsibility of the
installer. Product failure due to improper installation
is not covered under the GE Appliances Warranty.
See Warranty information.

•

Completion Time – 1 to 3 Hours

. New installations

require more time than replacement installations.

IMPORTANT –

The dishwasher MUST be installed to

allow for future removal from the enclosure if service is
required.
Care should be exercised when the appliance is installed
or removed, to reduce the likelihood of damage to the
power supply cord.
If you received a damaged dishwasher, you should
immediately contact your dealer or builder.
Optional Accessories – See the Owner’s Manual for
available custom panel kits.
Your dishwasher is a water heating appliance.

BEFORE YOU BEGIN

Read these instructions completely and carefully.

•

Remove all power leading to the appliance from the
circuit breaker or fuse box before beginning installation.
Failure to do so can result in a risk of electrical shock.

•

To reduce the risk of electric shock, fire, or injury to persons,
the installer must ensure that the dishwasher is completely
enclosed at the time of installation.

•

The improper connection of the equipment grounding
conductor can result in a risk of electric shock. Check
with a qualified electrician or service representative
if you are in doubt that the appliance is properly
grounded. If house wiring is not 2-wire with ground, a
ground must be by the installer. When house wiring
is aluminum, be sure to use UL-Listed anti-oxidant
compound and aluminum-to-copper connectors.

•

To reduce the risk of electric shock, fire, or injury to
persons, the installer should check to ensure that wires are
not pinched or damaged, the house wiring is attached to the
junction box bracket through a strain relief, and all electrical
connections made at the time of install (wire nuts) are
contained inside of the junction box cover.

• Do not use an extension cord or adapter plug with this

appliance.

WARNING

0120501699B

• Be sure to leave complete literature package, these Installation

Instructions and product samples and/or coupons with the
consumer.

NOTE:

Product improvement is a continuing endeavor

at GE Appliances. Therefore, materials, appearance and
specifications are subject to change without notice.

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Was this manual helpful?

About this manual

Brand
GE
Model
GDT225SSL0SS
Document type
Installation Manual
Language(s)
English
Pages
36
File size
2.3 MB
Format
PDF

Other Manuals for GE GDT225SSL0SS

Summary

Page 2 - For New Installations Only:; MATERIALS YOU WILL NEED:; opposite end sized to fit water supply); Materials For New Installations Only:; Installation Preparation

2 PARTS SUPPLIED IN INSTALLATION PACKAGE: • Drain hose extension• Hose Clamp• 2 mounting brackets for wood countertop or side cabinets ( NOTE: Use the appropriate brackets, as shown, for your model width.) • Toekick Insulation (18” Models Only)• 6 Phillips-Head screws to secure dishwasher to undersi...

Page 3 - DETERMINE DRAIN METHOD; If the answer to either question is YES, Method 1; CABINET PREPARATION; PREPARE DISHWASHER; IMPORTANT –; Method 1 – Air Gap with Waste Tee or Disposer; Always be sure disposer drain plug has been removed; WARNING; Method 2 – “High Drain Loop” with Waste Tee or Disposer

3 PREPARE DISHWASHER ENCLOSURE • The dishwasher must be installed so that drain hose is no more than 12’ in length for proper drainage. • The dishwasher must be fully enclosed on the top, sides and back, and must not support any part of the enclosure. CLEARANCES: • When installed into a corner, allo...

Page 4 - Cabinet Preparation & Wire Routing; Electrical Connection to Dishwasher; PREPARE ELECTRICAL WIRING; Electrical Requirements

4 Installation Preparation Cabinet Preparation & Wire Routing • The wiring may enter the opening from either side, rear or the floor within the shaded area illustrated above in figure and as defined in PREPARE DISHWASHER ENCLOSURE section. • Cut a 1-1/2" maximum diameter hole to admit the el...

Ask a question

Up to 3 photos. Max 5 MB each. Formats: JPG, JPEG, PNG, WebP.

Related manuals

Popular GE Other

More GE Other models