GE -DS-242-POE- User Manual
GE -DS-242-POE– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Terminal Setup
- Page 3 – START
- Page 4 – Telnet Setup; Connect an RJ-45 cable from the PC to a Switch port on the Managed
- Page 6 – the; Connect using; Log on to the Console
- Page 7 – Now you can configure the Switch by Telnet.; Web Browser Setup; Start Web Management; , then the manager PC should be set at
- Page 8 – Login to the managed Switch; Use Internet Explorer 6.0 or above Web browser, enter IP address
- Page 9 – After entering the password, the main screen appears as Figure 10.
- Page 10 – Resetting the IP Address; reset button; at the front panel; Contact information
1 of 10
© 2010 GE Security, Inc.
P/N 1069668 • REV 1.0 • ISS 22FEB10
GE
Security
GE-DS-242-PoE Managed
Ethernet Switch Installation
Sheet
Package Contents
Thank you for purchasing the GE Security
GE-DS-242-PoE
a 24-Port Fast
Ethernet + 2-Port Gigabit TP/SFP Combo Managed PoE Switch.
Open the box of the Managed Switch and carefully unpack it. The box should
contain the following items:
• The Managed Switch x1
• User's manual CD x1
• This Installation Sheet x1
• RS232 cable x1
• Rubber feet x 4
• Two rack-mounting brackets with attachment screws x1
• Power
Cord
x1
If any item is found missing or damaged, please contact your local reseller for
replacement.
System Requirements
Your switch is designed to operate with a variety of platforms, operating systems
and network cards. Actual performance will depend on a combination of these
components. Differences in performance can occur depending on the versions
and types of platforms, operating system and network cards used.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 of 10 P/N 1069668 • REV 1.0 • ISS 22FEB10 The minimum system requirements are: • Clients running Windows 98/ME, NT4.0, 2000/XP, Vista, MAC OS9 or later, Linux, UNIX or other platform compatible with TCP/IP protocols. • Workstation installed with Ethernet NIC (Network interface Card) • Serial Port ...
P/N 1069668 • REV 1.0 • ISS 22FEB10 3 of 10 Figure 1: Terminal setup diagram A terminal program is required to make the software connection to the GE-DS-242-PoE Managed Switch. Windows' Hyper Terminal program is a good choice. The Hyper Terminal program can be accessed from the Start menu. 1. Click ...
4 of 10 P/N 1069668 • REV 1.0 • ISS 22FEB10 Logon to the Console Once the terminal has connected to the device, power on the GE-DS-242-PoE Managed Switch, the terminal will display that it is running testing procedures. Then, the following message asks for the login user name and password. The facto...
