GE -DS-242-POE- Manuals

Page 2 - Terminal Setup

2 of 10 P/N 1069668 • REV 1.0 • ISS 22FEB10 The minimum system requirements are: • Clients running Windows 98/ME, NT4.0, 2000/XP, Vista, MAC OS9 or later, Linux, UNIX or other platform compatible with TCP/IP protocols. • Workstation installed with Ethernet NIC (Network interface Card) • Serial Port ...

Page 3 - START

P/N 1069668 • REV 1.0 • ISS 22FEB10 3 of 10 Figure 1: Terminal setup diagram A terminal program is required to make the software connection to the GE-DS-242-PoE Managed Switch. Windows' Hyper Terminal program is a good choice. The Hyper Terminal program can be accessed from the Start menu. 1. Click ...

Page 4 - Telnet Setup; Connect an RJ-45 cable from the PC to a Switch port on the Managed

4 of 10 P/N 1069668 • REV 1.0 • ISS 22FEB10 Logon to the Console Once the terminal has connected to the device, power on the GE-DS-242-PoE Managed Switch, the terminal will display that it is running testing procedures. Then, the following message asks for the login user name and password. The facto...

Page 6 - the; Connect using; Log on to the Console

6 of 10 P/N 1069668 • REV 1.0 • ISS 22FEB10 4. Change the Connect using drop-down menu to TCP/IP (Winsock) then input Host address. The Managed Switches default IP address is 192.168.0.100 and the default telnet port number is 23, then press the OK button. Figure 6: The Connect to dialog window Log ...

Page 7 - Now you can configure the Switch by Telnet.; Web Browser Setup; Start Web Management; , then the manager PC should be set at

P/N 1069668 • REV 1.0 • ISS 22FEB10 7 of 10 Figure 7: Login request window Now you can configure the Switch by Telnet. Web Browser Setup Start Web Management The following shows how to start up the Web Management of the GE-DS-242-PoE Managed Switch. Please note that the Managed Switch is configured ...

Page 8 - Login to the managed Switch; Use Internet Explorer 6.0 or above Web browser, enter IP address

8 of 10 P/N 1069668 • REV 1.0 • ISS 22FEB10 Figure 8: IP management diagram Login to the managed Switch 1. Use Internet Explorer 6.0 or above Web browser, enter IP address http://192.168.0.100 (the factory-default IP address or that you have just changed in the console) to access the Web interface. ...

Page 9 - After entering the password, the main screen appears as Figure 10.

P/N 1069668 • REV 1.0 • ISS 22FEB10 9 of 10 Figure 9: Login Screen 3. After entering the password, the main screen appears as Figure 10. Figure 10: Main Screen of the GE-DS-242-PoE 4. Now, you can use the Web management interface to continue the Switch management, please refer to the user manual for...

Page 10 - Resetting the IP Address; reset button; at the front panel; Contact information

10 of 10 P/N 1069668 • REV 1.0 • ISS 22FEB10 Resetting the IP Address To reset the IP address to the default IP Address "192.168.0.100" or reset the login password to default value. Press the hardware reset button at the front panel about 10 seconds . After the device is rebooted, you can lo...