Garmin GNC 250- Manual

Waypoint Categor y Each waypoint category features a set of waypoint pages accessible by rotating the outer knob with thecursor inactive. Proximity Waypoint Page User Waypoints Page Waypoint Comments Page Airport Identification Airport Comments Airport Position Airport Communications Airport Runway ...

TO ACCESS APT INFORMATION : ❏ Press the W key. ❏ Press C twice to activate the cursor. ❏ Press E to confirm the ‘apt?’ category. The airport identification page will appear with the identifierfield ready for entry. TO ENTER APTS BY IDENTIFIER : ❏ Highlight an identifier field, and enter the identifi...

TO SELECT A DIRECT - TO DESTINATION : ❏ Press the D key. ❏ Enter the identifier of the destination waypoint. ❏ Press E to accept the identifier, and E again to accept the direct-to confirmation page. TO RE - CENTER THE D - BAR : ❏ Press D , followed by E twice. TO SELECT A DIRECT - TO FROM ANY PAGE ...

The GNC 250’s waypoint sequencing field allows you to ‘hold’ on a selected waypoint and prevent the GPS from sequencing to the next route waypoint. You may also use the hold mode with the course select feature to maintain a user-defined course to the hold waypoint. TO HOLD ON A WAYPOINT : ❏ Set the ...

Once the waypoint sequencing field is set to the ‘hold’ position, the selected course will appear at the bottom left corner of the CDI page. TO ENTER A NEW COURSE FROM THE CDI PAGE : ❏ Press C twice to activate the cursor in the GPS window. ❏ Rotate O to highlight the course select field. ❏ Use K an...

CDI Page NAV Menu 2 NAV Menu 1 Satellite Status Page NAVCOM Page Position Page The NAV key is used to view navigation, position and status infor- mation and provides access to various planning and calculation functions. To scroll through the navigation pages, press NAV androtate the outer knob; or p...

NEAREST/SU A TO VIEW NEAREST APT INFORMATION : ❏ Press the T key. The nearest airport will be displayed, subject to the runway surface type and minimum runway length currentlyselected. TO VIEW OTHER NEAREST APTS : ❏ Rotate K to the right. TO VIEW ANY ADDITIONAL AIRPORT INFO : ❏ Highlight the frequen...

ROUTES TO CREATE OR EDIT A ROUTE : ❏ Press the R key and rotate O until the route catalog page appears. ❏ Rotate K to display the route number you would like to create or edit (route 0 for the active route). ❏ Press C twice to activate the cursor in the GPS window. ❏ Rotate K to select the ‘edit?’ o...

ROUTES TO ACTIVATE A ROUTE : ❏ Press R and rotate O to display the route catalog page. ❏ Rotate K to display the desired route. ❏ Press C twice to activate the cursor in the GPS window. ❏ Rotate K to select the ‘activate?’ option from the route action field. ❏ Press E . The route will be copied into...

CDI Settings Message Page I/O Channel 2 Map Datum Nearest Apt Search SUA Settings Batter y Saver Display Intensity Trip Timer Mag Var/Arrival Alarms Units of Measure The MSG key is used to view system messages and access the GNC 250’s unit settings. To view a message, press MSG.To access the unit se...