Garmin 400W Series - Manual

Table of Contents:

• Page 2 – later; Garmin
• Page 3 – Foreward; Warnings and Cautions
• Page 4 – Forward; Table of Contents
• Page 5 – SECTION 1: INTRODUCTION; Section 1; Introduction
• Page 6 – L-3 STORMSCOPE Description; NOTE; Interfaces are; The 400W/500W Series units perform a self-; From the default Nav Page, turn the; small; knob to select the Lightning (LTNG); MENU; to display the Page Menu.; small right; knob to select “Self-; ENT; Section 2; L-3 Stormscope Interface
• Page 7 – Displaying Storm Data on the Map Page; The Map Page displays cell or strike information; In normal operation, the current mode and rate; Storm Data Displayed on the Map Page
• Page 9 – Clearing the Map Page; Routinely clearing the Map Page of all discharge; Clearing discharge points from the Map Page.; Changing the Storm Data Display Range; Changing the storm data display range on
• Page 10 – Lightning Page—400W Series; In the 400W Series, When; Lightning Page—500W Series; In the 500W Series, when
• Page 11 – From the default NAV Page, turn the; knob to select the; to display an options menu.; Lightning Display
• Page 12 – SECTION 3: SKYWATCH INTERFACE; With the exception of traffic display range selec-; SKYWATCH Description; Please refer to the SKYWATCH Pilot’s Guide for a; If the SKYWATCH passes the power-up test and; Section 3; Skywatch Interface
• Page 13 – In addition to the power-up test, the SKYWATCH; Voice Announcements; See the SKYWATCH Pilot’s Guide for information; Switching Between Standby and Operating Modes; The unit must be in operating mode for traffic; STBY
• Page 14 – To change the Altitude Display Mode:; Traffic Page; Traffic can be displayed both on the Map Page; Traffic Warning Window; When the unit is not on the traffic page and a traf-; ) or return to the previous page (if the user presses; CLR
• Page 15 – Traffic Page Display Range; You can change the display range on the Traffic; Configuring Traffic Data on the Map Page; The display of traffic information is designed to; Selections for configuring traffic data are; Traffic mode allows the operator to choose which; • Other—White; The traffic label is the altitude separation above or
• Page 16 – Another map page function is panning, which; When the target pointer is placed on traffic,; When the target pointer is placed on traffic, the; Monitoring Traffic; See the information in the SKYWATCH Pilot’s
• Page 17 – Failure Response; Errors indicated by a “FAILED” message on the; Description of Traffic Advisory Criteria; For a description of Traffic Advisory criteria and; The SKYWATCH Pilot’s Guide contains
• Page 18 – SECTION 4: RYAN TCAD INTERFACE; All information in this section pertaining to the dis-; • TCAS-like symbols are used in the 9900BX.; Ryan TCAD Description; The Ryan TCAD (Traffic and Collision Alert; Operator Controls and Basic Displays; If there is no communication between the; Section 4; Ryan TCAD Interface
• Page 19 – Configuring TCAD Data on the Map Page; The display of traffic information closely resembles; You can configure TCAD data on the Map; The Map Page has the ability to display traffic in
• Page 20 – side of the Map Page.; Refer to the information in the TCAD Pilot’s Guide; Highlighting Traffic Data Using Map Panning; Panning is another map page function, which; Traffic Advisory. This is traffic with 500 feet, or; TCAD Setup Page; The Ryan TCAD Setup Page is accessed from the
• Page 21 – Traffic Page Fields; There are two selectable fields on the Traffic Page:; TCAD 9900B Operating Modes:; The second selectable field, located in the upper
• Page 22 – Ryan TCAD Traffic Warning Window
• Page 24 – © 2008 Garmin Ltd. or its subsidiaries; Garmin Corporation