Page 2 - later; Garmin
This Pilot’s Guide Addendum is written for: • Garmin GPS 400W, GNC 420W/420AW, and GNS 430W/430AW Main System Software Versions 2.00, 3.00, and later • Garmin GPS 500W & GNS 530W/530AW Main System Software Versions 2.00, 3.00, and later Some differences in operation may be observed when comparin...
Page 3 - Foreward; Warnings and Cautions
1 190-00356-31 Rev. C CAUTION: The Global Positioning System is operated by the United States government, which is solely responsible for its accuracy and maintenance. The system is subject to changes that could affect the accuracy and performance of all GPS equip-ment. Although the Garmin 400W/500W...
Page 4 - Forward; Table of Contents
2 Table of Contents SECTION 1: INTRODUCTION ........................................... 3SECTION 2: L-3 STORMSCOPE INTERFACE .................... 4 L-3 STORMSCOPE Description ........................................ 4Power-Up Self-Test ........................................................ 4User-I...
Page 5 - SECTION 1: INTRODUCTION; Section 1; Introduction
3 SECTION 1: INTRODUCTION The Garmin 400W/500W Series units provide the display interface and control for the following traffic and weather devices/systems: • L-3 STORMSCOPE ® WX-500 Weather Mapping Sensor • L-3 SKYWATCH ® Traffic Advisory System (Model SKY497) • L-3 SKYWATCH ® HP Traffic Advisory S...
Page 6 - L-3 STORMSCOPE Description; NOTE; Interfaces are; The 400W/500W Series units perform a self-; From the default Nav Page, turn the; small; knob to select the Lightning (LTNG); MENU; to display the Page Menu.; small right; knob to select “Self-; ENT; Section 2; L-3 Stormscope Interface
4 SECTION 2: L-3 STORMSCOPE INTERFACE L-3 STORMSCOPE Description NOTE : Refer to the WX-500 Pilot’s Guide for a detailed description of the WX-500 STORMSCOPE. The L-3 STORMSCOPE WX-500 Weather Map- ping Sensor is a passive weather avoidance system that detects electrical discharges associated with t...
Page 7 - Displaying Storm Data on the Map Page; The Map Page displays cell or strike information; In normal operation, the current mode and rate; Storm Data Displayed on the Map Page
5 Displaying Storm Data on the Map Page The Map Page displays cell or strike information using yellow lightning strike symbology overlaid on a moving map. This added capability improves situational awareness, which in turn makes it much easier for the pilot to relate storm activity to airports, NAVA...
Page 9 - Clearing the Map Page; Routinely clearing the Map Page of all discharge; Clearing discharge points from the Map Page.; Changing the Storm Data Display Range; Changing the storm data display range on
77 190-00356-31 Rev. C Clearing the Map Page Routinely clearing the Map Page of all discharge points is a good way to determine if a storm is build-ing or dissipating. In a building storm discharge points reappear faster and in larger numbers. In a dissipating storm discharge points appear slower an...
Page 10 - Lightning Page—400W Series; In the 400W Series, When; Lightning Page—500W Series; In the 500W Series, when
88 Lightning Page—400W Series In addition to the Map Page, storm data can also be viewed on the Lightning Page. In the 400W Series, When the STORMSCOPE is connected to the unit, the Lightning Page appears after the Traffic Page in the sequence of Nav Pages. Default NAV Map NAVCOM Position Satellite ...
Page 11 - From the default NAV Page, turn the; knob to select the; to display an options menu.; Lightning Display
99 190-00356-31 Rev. C Lightning Display The Lightning Page displays either a 360° or a 120° viewing angle. In normal operation, the current strike rate is displayed in the top right corner, accompanied in the top left corner by the word “LTNG”. When in strike mode, “Strike” is displayed in the lowe...
Page 12 - SECTION 3: SKYWATCH INTERFACE; With the exception of traffic display range selec-; SKYWATCH Description; Please refer to the SKYWATCH Pilot’s Guide for a; If the SKYWATCH passes the power-up test and; Section 3; Skywatch Interface
10 10 190-00356-31 Rev. C SECTION 3: SKYWATCH INTERFACE Introduction With the exception of traffic display range selec- tions, all information in this section pertaining to the display and control of the L-3 SKYWATCH (SKY 497) also applies to the L-3 SKYWATCH HP (SKY 899) and the Bendix/King KTA 870...
Page 13 - In addition to the power-up test, the SKYWATCH; Voice Announcements; See the SKYWATCH Pilot’s Guide for information; Switching Between Standby and Operating Modes; The unit must be in operating mode for traffic; STBY
11 11 190-00356-31 Rev. C To begin tracking intruder aircraft 1. Turn the cursor on and highlight STBY . 2. Turn the small right knob to select OPER . 3. Press ENT to confirm operating mode and begin tracking intruder aircraft. Operating Mode is confirmed by the display of “OPER” in the upper right-...
Page 14 - To change the Altitude Display Mode:; Traffic Page; Traffic can be displayed both on the Map Page; Traffic Warning Window; When the unit is not on the traffic page and a traf-; ) or return to the previous page (if the user presses; CLR
12 12 190-00356-31 Rev. C Altitude Display Mode The name of the selected altitude display mode (ABV: look up, NRM: normal, BLW: look down, or UNR: unrestricted) is displayed in the upper left-hand corner of the Traffic Screen. The SKY 497 continues to track up to 30 intruder aircraft within its maxi...
Page 15 - Traffic Page Display Range; You can change the display range on the Traffic; Configuring Traffic Data on the Map Page; The display of traffic information is designed to; Selections for configuring traffic data are; Traffic mode allows the operator to choose which; • Other—White; The traffic label is the altitude separation above or
13 13 190-00356-31 Rev. C NOTE: SKYWATCH data is only displayed on the Map Page if suitable aircraft heading data is available. See the Garmin 400W or 500W Series Installation Manuals avail- able at your authorized Garmin service center for details. Traffic Page Display Range You can change the disp...
Page 16 - Another map page function is panning, which; When the target pointer is placed on traffic,; When the target pointer is placed on traffic, the; Monitoring Traffic; See the information in the SKYWATCH Pilot’s
14 14 190-00356-31 Rev. C the top three data fields (top four fields on the 500W Series) on the right side of the Map Page. When a Traffic Advisory is active, the “Traffic” banner is displayed in the lower right corner of the Map Page. To display Thumbnail Traffic on the Map Page 1. Turn the small r...
Page 17 - Failure Response; Errors indicated by a “FAILED” message on the; Description of Traffic Advisory Criteria; For a description of Traffic Advisory criteria and; The SKYWATCH Pilot’s Guide contains
15 190-00356-31 Rev. C Failure Response Errors indicated by a “FAILED” message on the screen prevent continued use of the SKYWATCH. Please see the L-3 SKYWATCH Pilot’s Guide for detailed information on Failure Response. Description of Traffic Advisory Criteria For a description of Traffic Advisory c...
Page 18 - SECTION 4: RYAN TCAD INTERFACE; All information in this section pertaining to the dis-; • TCAS-like symbols are used in the 9900BX.; Ryan TCAD Description; The Ryan TCAD (Traffic and Collision Alert; Operator Controls and Basic Displays; If there is no communication between the; Section 4; Ryan TCAD Interface
16 SECTION 4: RYAN TCAD INTERFACE All information in this section pertaining to the dis- play and control of the Ryan 9900B TCAD also applies to the Ryan 9900BX TCAD except for the following: • TCAS-like symbols are used in the 9900BX. TCAD symbols are used with the 9900B (see the table on page 17)....
Page 19 - Configuring TCAD Data on the Map Page; The display of traffic information closely resembles; You can configure TCAD data on the Map; The Map Page has the ability to display traffic in
17 9900B (TCAD) Symbols TRFC (White)—Altitude separa-tion >500 feet, steady altitude separationTA (Yellow)—Altitude separa-tion £ 500 feet, steady altitude separation TRFC (White)—Altitude separa-tion >500 feet, closingPA (White)—Altitude separa-tion £ 500 feet, opening TRFC (White)—Altitude s...
Page 20 - side of the Map Page.; Refer to the information in the TCAD Pilot’s Guide; Highlighting Traffic Data Using Map Panning; Panning is another map page function, which; Traffic Advisory. This is traffic with 500 feet, or; TCAD Setup Page; The Ryan TCAD Setup Page is accessed from the
18 side of the Map Page. To display Thumbnail Traffic on the Map Page: 1. Turn the small right knob to select the Map Page. 2. Press MENU to display the Page Menu. 3. Use the small right knob to select “Change Fields?” and press ENT . 4. Select one of the top three fields (top four fields on a 500W ...
Page 21 - Traffic Page Fields; There are two selectable fields on the Traffic Page:; TCAD 9900B Operating Modes:; The second selectable field, located in the upper
19 190-00356-31 Rev. C Ryan TCAD Setup Page (9900B only) To change a TCAD setup option: 1. Turn the small right knob to select the Traffic Page. Press MENU to display the Page Menu. Turn the small right knob to select “Setup?” and press ENT . 2. The flashing cursor highlights the Mode field. Turn th...
Page 22 - Ryan TCAD Traffic Warning Window
20 190-00356-31 Rev. C To change the Barometric Pressure: 1. From the Traffic Page, press the cursor to highlight the Operating Mode field. Turn the large right knob to select the Barometric Pressure Field. Use the small right knob to select the desired value and press ENT . Note: When editing the v...
Page 24 - © 2008 Garmin Ltd. or its subsidiaries; Garmin Corporation
© 2008 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151 st Street, Olathe, Kansas 66062, U.S.A. Garmin AT, Inc. 2345 Turner Rd., S.E., Salem, Oregon 97302, U.S.A. Garmin (Europe) Ltd. Liberty House, Bulls Copse Road, Hounsdown Business Park, Southhampton, SO40 9RB, U.K. Garmi...