Fujitsu FBR211 - Manual
Fujitsu FBR211 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – COIL DATA CHART
- Page 3 – SPECIFICATIONS; Item; INSULATION
- Page 4 – CHARACTERISTIC DATA; REFERENCE DATA
- Page 5 – DIMENSIONS; Dimensions; PC BOARD MOUNTING HOLE LAYOUT
- Page 6 – RoHS Compliance and Lead Free Relay Information; Reflow Solder condition; Moisture Sensitivity; Flow Solder condition:; dip within 5 sec. at; Solder by Soldering Iron:; Soldering Iron
- Page 7 – Fujitsu Components International Headquarter Offices
n
FEATURES
l
2 A maximum carrying current
Capable of 2 A maximum continuous carrying current in the
contact
l
Superior reliability gold-overlay contacts
P type: Gold-overlay silver-palladium contacts
l
International terminal pitch of one inch grid terminal layout
l
High sensitivity, low power dissipation types also available
Standard types: 0.45 W (A or B type)
High sensitivity types: 0.2 W (C or E type)
l
Conforms to FCC 68.302 (high dielectric strength type)
l
UL recognized (File number E63615)
l
CSA recognized (File number LR64026)
l
RoHS compliant since date code: 0433A
Please see page 5 for more information
(a)
Series Name
FBR211
(b)
Enclosure
S: Flux free type
N: Plastic sealed type
A: Standard A type
}
(nominal power 450 mW type)
(c)
Coil Power and Schematics
B: Standard B type
C: High sensitivity C type
}
(nominal power 200 mW type)
E: High sensitivity E type
(d)
Nominal Voltage
(Example) D003: 3 VDC
D012: 12 VDC (refer to the COIL DATA CHART)
(e)
UL Marking on Cover
Nil : No UL marking
U : UL marking
( f )
Contact Material
P : Gold-overlay silver-palladium
M : Gold-overlay silver
(g)
Special Type
Nil : Standard
2 : High dielectric strength type
(h)
CSA Marking
Nil
: Standard
-CSA : UL + CSA marking (valid when (e) is U)
Note: The designation name is stamped on the top of the relay case as follows:
(Example) Designation ordered: FBR211SAD005-P
Stamp: 211SAD005-P
n
ORDERING INFORMATION
FBR211 S A D012 U – P
2 (–CSA)
[Example]
(a)
(b) (c)
(d)
(e) (f ) (g)
(h)
FBR211 SERIES
MINIATURE RELAY
1 POLE—1 to 2 A
(FOR SIGNAL SWITCHING)
1
RoHS compliant
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 FBR211 SERIES n COIL DATA CHART MODEL Nominal Nominal Coil current Must Must Maximum Nominal Coil A type B type resistance (at nominal operate release allowable temperature voltage (±10%) voltage) voltage voltage voltage power rise Flux free Plastic sealed Flux free Plastic sealed approx. FBR211SA...
3 FBR211 SERIES n SPECIFICATIONS Item Standard (A or B type) High sensitive (C or E type) Contact Arrangement 1 form C (SPDT) Material Gold-overlay silver-palladium / gold-overlay silver Resistance (initial) Maximum 100 mΩ (at 0.1 A 6 VDC) Rating (resistive) 0.5 A 120 VAC or 1 A 28 VDC Maximum Carry...
4 FBR211 SERIES n CHARACTERISTIC DATA 70 80 90 100 110 120 130 140 150 160 0 10 20 30 40 50 60 70 –10 Operating voltage range Must operate voltage Range of operation temperature and voltage (Standard 0.45 W type) Operating temperature (°C) 80 Max imu m a llow able coil volt age 70 80 90 100 110 120 ...
