Fujitsu D2963-S - Manual

TechNotes_D2963_V1.0 Copyright 2010 FUJITSU LIMITED 10 Display Options • LVDS display & backlight inverter • LVDS / Inverter connector details • LVDS timings & screen resolutions • LVDS cabling reference • DVI, VGA, HDMI, LVDS

TechNotes_D2963_V1.0 Copyright 2010 FUJITSU LIMITED 11 Backlight Inverter LVDS Display (rear view) Integrated Backlight, powered by Inverter Integrated Backlight, powered by Inverter Display Options LVDS Display & Backlight Inverter Display Options LVDS Display & Backlight Inverter

TechNotes_D2963_V1.0 Copyright 2010 FUJITSU LIMITED 14 LVDS voltage selector jumper 1 2 PIN SIGNAL SIGNAL PIN 2 Ground Ground 1 4 LVDS_H3+ (EVEN_3+) LVDS_L3+ (ODD_3+) 3 6 LVDS_H3- (EVEN_3-) LVDS_L3- (ODD_3-) 5 8 Ground Ground 7 10 LVDS_H2+ (EVEN_2+) LVDS_L2+ (ODD_2+) 9 12 LVDS_H2- (EVEN_2-) LVDS_L2-...

TechNotes_D2963_V1.0 Copyright 2010 FUJITSU LIMITED 15 Ground GND 1 Ground GND 2 Backlight Brightness CTRL tbd 3 Power 5V VCC 4 Power 5V VCC 5 Backlight On/Off Control BL On/Off 6 Power 12V +12V 7 Power 12V +12V 8 1 8 Backlight Inverter Connector: JST PHR-8 Note:Backlight Brightness Control: Provide...

TechNotes_D2963_V1.0 Copyright 2010 FUJITSU LIMITED 16 • Available default LVDS settings (BIOS Setup – Advanced – Peripheral Configuration) Note:Default BIOS Setting for LVDS is “Disabled”.Any BIOS Setup changes can be fixed as new default BIOS setting via BIONVD tool! ftp://ftp.ts.fujitsu.com/pub/M...

TechNotes_D2963_V1.0 Copyright 2010 FUJITSU LIMITED 17 • DOS-Tool LVDS.EXE V1.01 allows to adjust LVDS timing parameters • Download link ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Products/Mainboards/Industrial&ExtendedLifetime/D2963-S/IndustrialTools_D2963- S/LVDS-Tool/ • Select one of th...

TechNotes_D2963_V1.0 Copyright 2010 FUJITSU LIMITED 18 • Sample cabling diagrams for following LVDS displays & related inverters are available: Display Size TFT Pixel Inverter 10.4" NEC NL6448BC33-63D 640 x 480 NEC 104PW 201 12.1" AUO G121SN01-V0 800 x 600 Green-C&C GH093A-ROHS 12.1&...

TechNotes_D2963_V1.0 Copyright 2010 FUJITSU LIMITED 19 Display Options LVDS Sample Cabling for AuO-G150 Display Options LVDS Sample Cabling for AuO-G150

TechNotes_D2963_V1.0 Copyright 2010 FUJITSU LIMITED 20 Digital (DVI) Monitor max. DVI screen resolution: 2560 x 1600 / 32bit color (Dual Link) 1600 x 1200 / 32bit color (Single Link, standard timings)1920 x 1200 / 32bit color (Single Link, reduced blanking timings) Display Options DVI Output Display...

TechNotes_D2963_V1.0 Copyright 2010 FUJITSU LIMITED 22 Analog (VGA) Monitor via DVI/VGA interface connector max. VGA screen resolution: 2048x1536 @85Hz for 4:3 format2560x1440 @75Hz for 16:9 format2456x1536 @60Hz for 16:10 format Display Options VGA Output via Interface Connector Display Options VGA...

TechNotes_D2963_V1.0 Copyright 2010 FUJITSU LIMITED 23 Analog (VGA) Monitor and Digital (DVI) Monitor via DVI/VGA splitter cable Dual Independent Display Option (Note: DVI – single link only via splitter cable!) Display Options DVI & VGA via Splitter Cable Display Options DVI & VGA via Split...

TechNotes_D2963_V1.0 Copyright 2010 FUJITSU LIMITED 24 Analog (VGA) Monitor or Digital (DVI) Monitor; plus LVDS Display Dual Independent Display Option or max. LVDS screen resolution: 2048 x 1536 / 32bit color Display Options DVI or VGA plus LVDS Display Options DVI or VGA plus LVDS

TechNotes_D2963_V1.0 Copyright 2010 FUJITSU LIMITED 25 Power Supply Features • 19-24V DC power supply • Drive power connector

TechNotes_D2963_V1.0 Copyright 2010 FUJITSU LIMITED 26 D2963-S offers two power supply options 1. Onboard 4 - pin power supply connector Power Supply Features Power Supply Features Pin 1, 2: GND Pin 3, 4: +19…24V DC-In Pin 1, 2: GND Pin 3, 4: +19…24V DC-In

TechNotes_D2963_V1.0 Copyright 2010 FUJITSU LIMITED 27 +19…24V DC (Ø 2.5mm) GND (Ø 6.4mm) 19…24V DC via external connector (AC adapter) Appropriate DC plug for external AC adapter: Ø 2.5mm / 5.5mm contact length ~ 10-11mm Angle plug or straight plug Note: “Universal Plug” not allowed due to possible...

TechNotes_D2963_V1.0 Copyright 2010 FUJITSU LIMITED 29 19/24V AC Adapter (external) BLUE = power Max. rating via Drive Power Connector: +5V/2A ; +12V/2A optional: SATA CD/DVD 19/24V Supply (internal) or Power Supply Features Power option for internal drives Power Supply Features Power option for int...

TechNotes_D2963_V1.0 Copyright 2010 FUJITSU LIMITED 31 1 VCC (+5V) max. 2A 2 GND 3 GND 4 +12V max. 2A Drive Power Connector Note:Connector is compliant to standard floppy power supply connector. Power Supply Features Drive Power Connector Power Supply Features Drive Power Connector

TechNotes_D2963_V1.0 Copyright 2010 FUJITSU LIMITED 32 Note: overall max. current via connector 1 limited to +5V / 2A and +12V / 2A 15 . . . . . . . . 1 COMAX C1212K32 or equiv alent Connector 1 (to mainboard) Connector 2 (for SATA harddisk 2.5 “ / 3.5 “ ) L1 = 20cm Connector 3 (for slimeline SATA o...

TechNotes_D2963_V1.0 Copyright 2010 FUJITSU LIMITED 33 Prerequisite: No LVDS display attached to mainboard! The backlight inverter connector provides additional power for internal devices (+5V / +12V; max. 2A per pin!) Power Supply Features Additional Power Output via Inverter Connector Power Supply...

TechNotes_D2963_V1.0 Copyright 2010 FUJITSU LIMITED 34 Feature Connector Feature Connector provides additional power for internal devices: 3.3V 5V 12V 5Vaux max. 1.5 A per pin! Power Supply Features Additional Power Output via Feature Connector Power Supply Features Additional Power Output via Featu...

TechNotes_D2963_V1.0 Copyright 2010 FUJITSU LIMITED 35 Internal Connectors • Optional Devices via Feature Connector • Internal USB/Audio Ports • Compact Flash • Second Serial Port • Frontpanel Connector • PCI / PCIe / Mini-PCIe Extension Slot

TechNotes_D2963_V1.0 Copyright 2010 FUJITSU LIMITED 37 1 2 Notes: - SW-access to GPI/O: see mainboard specification for details - A Windows-based API is available for easy implementation of the GPIO features (included in SystemMonitoring API) Available via OEM FTP Server: ftp://ftp.ts.fujitsu.com/pu...

TechNotes_D2963_V1.0 Copyright 2010 FUJITSU LIMITED 38 Connect internal ports to USB/Audio frontpanel module(Note: 2 USB ports per connector) USB Ports Frontpanel Audio RED = USB BLUE = Audio Internal Connectors Internal USB/Audio Ports Internal Connectors Internal USB/Audio Ports

TechNotes_D2963_V1.0 Copyright 2010 FUJITSU LIMITED 39 USB Ports Optional: Touchscreen Controller via USB Internal Connectors Internal USB Ports – Miscellaneous Options Internal Connectors Internal USB Ports – Miscellaneous Options

TechNotes_D2963_V1.0 Copyright 2010 FUJITSU LIMITED 41 CF Card – inserted in socket on mainboard (IDE „Master“-Interface) Internal Connectors Compact Flash Internal Connectors Compact Flash

TechNotes_D2963_V1.0 Copyright 2010 FUJITSU LIMITED 42 COM2 Connector External I/O Bracket Internal Connectors Second Serial Port Internal Connectors Second Serial Port Note: Pinning according FTS standard!

TechNotes_D2963_V1.0 Copyright 2010 FUJITSU LIMITED 43 Frontpanel Connector Frontpanel providing - Powerswitch - Power/HDD-LED - Reset-Switch Internal Connectors Frontpanel Connector Internal Connectors Frontpanel Connector

TechNotes_D2963_V1.0 Copyright 2010 FUJITSU LIMITED 44 1 2 10 (KEY) Reserved (NC) 9 8 PowerSwitch_GND ResetSwitch_P 7 6 PowerSwitch_P ResetSwitch_GND 5 4 Power_LED_GND HDD_LED- 3 2 Power_LED+ HDD_LED+ 1 Frontpanel Connector Note: Pinning is compatible to Intel 10 pin header Internal Connectors Front...

TechNotes_D2963_V1.0 Copyright 2010 FUJITSU LIMITED 45 - 32Bit, 33MHz, PCI Rev. 2.3 - Compliant to 3.3V / 5V devices - Supports up to two PCI master slots via risercards PCI Risercards offered by FTS Note: Third party risercards must not use any “Reserved”-pins of PCI connector! Internal Connectors ...

TechNotes_D2963_V1.0 Copyright 2010 FUJITSU LIMITED 46 - PCIe x1 - Provides the option to install customer-specific extension cards - Note: External connectors of PCIe x1 cards require appropriate aperture in chassis rear! Internal Connectors PCI Express Extension Slot Internal Connectors PCI Expres...

TechNotes_D2963_V1.0 Copyright 2010 FUJITSU LIMITED 47 Internal Connectors Mini PCI Express Extension Slot (bottom side) Internal Connectors Mini PCI Express Extension Slot (bottom side) Mini PCI Express Connector (incl. USB support) Mechanical Lock for Mini PCI Express Card Note: Mini card lock sup...

TechNotes_D2963_V1.0 Copyright 2010 FUJITSU LIMITED 48 System Monitoring • Temperature Sensors and Fans • SystemGuard: Fan/Temperature Monitor • SilentFanConfig: Customize System Monitoring • Temperature Reference Points

TechNotes_D2963_V1.0 Copyright 2010 FUJITSU LIMITED 52 • Windows-based Monitoring Tool • Download link to latest version: ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Services/Software&Tools/Common-Mainboard-Tools/SystemGuard/ Note: Version 3.50 or higher recommended for D2963-S • SystemGuar...

TechNotes_D2963_V1.0 Copyright 2010 FUJITSU LIMITED 53 Temperature Sensors Northbridge Sensor Super I/O Sensor Processor Sensor Sensor / Fan Matrix Factory default setting: - FAN1 (CPU) controlled by Processor temperature 1) - FAN2 controlled by all sensors 1) Note: Characteristics for FAN1 is alway...

TechNotes_D2963_V1.0 Copyright 2010 FUJITSU LIMITED 54 Sensor / Fan Matrix Only Sensor 1 (Super I/O) controls Fan2 All relevant System Monitoring parameters can be customized via SilentFanConfig-Tool! System Monitoring SystemGuard – Sample for Customized Fan Settings System Monitoring SystemGuard – ...

TechNotes_D2963_V1.0 Copyright 2010 FUJITSU LIMITED 55 • Windows-based Configuration Tool ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Products/Mainboards/Industrial&ExtendedLifetime/D2963-S/IndustrialTools_D2963-S/SilentFanConfigManager/ • Use SilentFanConfig to adjust the required settings...

TechNotes_D2963_V1.0 Copyright 2010 FUJITSU LIMITED 63 System Monitoring Climatic chamber test D2963-S System Monitoring Climatic chamber test D2963-S D2963-S with thermo couples for all critical components

TechNotes_D2963_V1.0 Copyright 2010 FUJITSU LIMITED 64 Reference Point Limit Temperatures (Component Surface) must not be exceeded! Operating Conditions: Circulating air max. 60 ° C Usage 24h / 7 days Inductors max. 90 ° C Inductor / Voltage Regulator max. 90 ° C Southbridge Heatsink max. 80 ° C Vol...

TechNotes_D2963_V1.0 Copyright 2010 FUJITSU LIMITED 66 If the processor temperature exceeds the internal Alert temperature level (~ 100 ° C; exact level depends on processor), the onboard electronics forces the processor to throttle down (“ProcHot”) in order to reduce the power consumption and preve...

TechNotes_D2963_V1.0 Copyright 2010 FUJITSU LIMITED 67 Mainboard Power Consumption • AC Mains Power Consumption

TechNotes_D2963_V1.0 Copyright 2010 FUJITSU LIMITED 69 Special Features • Mainboard Watchdog • Harddisk Security

TechNotes_D2963_V1.0 Copyright 2010 FUJITSU LIMITED 70 • Watchdog feature provides secure system behaviour in case of software crash • System shuts down or • System reboots Example: Printer Server (unattended) - Specific SW application re-triggers watchdog timer every 10 seconds -If the printer soft...

TechNotes_D2963_V1.0 Copyright 2010 FUJITSU LIMITED 71 • Password Protection for Harddisk • Password Entry on each Boot or • Silent Boot from Protected Harddisk à Second option useful for unattended system to ensure OS boot w/o any user interaction Note: Harddisk protected by HDD password cannot be ...

TechNotes_D2963_V1.0 Copyright 2010 FUJITSU LIMITED 72 Operating System Support • Windows ® XP / VISTA / Windows 7 • Windows® XP Embedded • Linux / Embedded Linux

TechNotes_D2963_V1.0 Copyright 2010 FUJITSU LIMITED 73 • Mainboard D2963-S is designed according to the Microsoft Guidelines for Windows XP, Windows VISTA and Windows 7 • MS certified drivers are available via OEM DU-DVD, OEM FTP Server and FTS Website Operating System Support Support for Windows® X...

TechNotes_D2963_V1.0 Copyright 2010 FUJITSU LIMITED 74 • Conditions • Customer is familiar with XP Embedded & Target Designer / Component Designer • Customer creates specific XP Embedded SW installation at his own responsibility & risk • FTS provides Board Support Package (SLD files incl. dr...

TechNotes_D2963_V1.0 Copyright 2010 FUJITSU LIMITED 75 1) See installation hints: http://www.suse.de/~sndirsch/ati-installer-HOWTO.html 2) Only preinstalled ATI driv er, driv er kit prov ided v ia ati.amd.com isn't working 3) Tested with compiled kernel 2.6.27.5Note: Note: If standard kernel is used...

TechNotes_D2963_V1.0 Copyright 2010 FUJITSU LIMITED 76 Operating System Support Support for Embedded Linux (preliminary) Operating System Support Support for Embedded Linux (preliminary) • FTS provides free demo BSP for Embedded Linux • Download link ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/...